| Lab.HOME | List.2001-2005 | 1991-2000 | 1973-1990 | Annually,2002- | Reviews | Book |


REFEREED JOURNAL ARTICLES, 2006 -

  1. Iskandar, F., T. Ogi and K. Okuyama: Simple synthesis of GaN nanoparticles from gallium nitrate and ammonia aqueous solution under a flow of ammonia gas, Mater. Lett., 60(1), 73-76 (2006)
  2. Purwanto, A., I. W. Lenggoro, H. K. Chang and K. Okuyama: Preparation of Submicron- and Nanometer-sized Particles of Y2O3:Eu3+ by Flame Spray Pyrolysis using Ultrasonic and Two-Fluid Atomizers, J. Chem. Eng. Jpn., 39(1), 68-76 (2006) [online]
  3. Shimada, M., Y. Azuma, K. Okuyama, Y. Hayashi and E. Tanabe: Plasma Synthesis of Light Emitting Gallium Nitride Nanoparticles Using a Novel Microwave-Resonant Cavity, Jpn. J. Appl. Phys., 45(1A), 328-332 (2006) [online]
  4. Chang, H. K., I. W. Lenggoro, K. Okuyama and H. D. Jang: A Flame Spray Pyrolysis Process for Preparing Red-Emitting, Submicron-Sized Luminescent Strontium Titanate Particles, Jpn. J. Appl. Phys. Part 1, 45(2A), 967-973 (2006) [online]
  5. Wang, W. N., I. W. Lenggoro, Y. Terashi, Y. C. Wang and K. Okuyama: Effects of Ethanol Addition and Ba/Ti Ratios on Preparation of Barium Titanate Nanocrystals via a Spray Pyrolysis Method, J. Am. Ceram. Soc., 89(3), 888-893 (2006)
  6. Song, D. K., H. M. Lee, H. Chang, S. S. Kim, M. Shimada and K. Okuyama: Performance Evaluation of Long Differential Mobility Analyzer (LDMA) in Measurements of Nanoparticles, J. Aerosol Sci., 37(5), 598-615 (2006) [online]
  7. Fisenko, S. P., W. N. Wang, I. W. Lenggoro and K. Okuyama: Evaporative Cooling of Micron-sized Droplets in a Low-Pressure Aerosol Reactor, Chem. Eng. Sci., 61(18), 6029-6034 (2006) [online]
  8. Kashihara, N., H. Setyawan, M. Shimada, Y. Hayashi, C. S. Kim, K. Okuyama and S. Winardi: Suppression of particle generation in a plasma process using a sine-wave modulated rf plasma, J. Nanoparticle Res., 8 (3-4), 395-403 (2006)
  9. Ogi, T., F. Iskandar, Y. Itoh and K. Okuyama: Characterization of dip-coated ITO films derived from nanoparticles synthesized by low-pressure spray pyrolysis, J. Nanoparticle Res., 8 (3-4), 343-350 (2006)
  10. Kim, C. S., L. Bao, K. Okuyama, M. Shimada and H. Niinuma: Filtration Efficiency of a Fibrous Filter for Nanoparticles, J. Nanoparticle Res., 8(2), 215-221 (2006)
  11. Lenggoro, I. W., H. M. Lee and K. Okuyama: Nanoparticle assembly on patterned "plus/minus" surfaces from electrospray of colloidal dispersion, J. Colloid Interface Sci., 303(1) 124-130 (2006)[online]
  12. Okuyama, K., M. Abdullah, I. W. Lenggoro and F. Iskandar: Preparation of Functional Nanostructured Particles by Spray Drying-A Review, Adv. Powder Technol., 17(6), 587-611 (2006)
  13. Iskandar, F., H. M. Lee, T. Toda, T. Iwaki and K. Okuyama: Fabrication of L10 FePtAg nanoparticles and a study on the effect of Ag during the annealing process, J. Magn. Magn. Mater., 305(2), 514-519 (2006)
  14. Jang, H. D., H. K. Chang, Y. J. Suh and K. Okuyama: Synthesis of SiO2 nanoparticles from sprayed droplets of tetraethylorthosilicateby the flame spray pyrolysis, Current Appl. Phys., 6 (SUPPL.1), e110-e113 (2006)
  15. Yamaguchi, T., Y. Azuma and K. Okuyama: Development of a Photon Correlation Spectroscopy Instrument to Measure Size Distributions of Nanoparticles, Part. Part. Syst. Charact., 23 (2), 188-192 (2006)
  16. nkyo, M., T. Tahara, T. Iwaki, F. Iskandar, C.J.Hogan Jr. and K. Okuyama: Experimental Investigation of Nanoparticle Dispersion by Beads Milling with Centrifugal Bead Separation, J. Colloid Interface Sci., 304 (2), 535-540 (2006)

(2007)

  1. 山口哲司, 奥山喜久夫: 多分散シングルナノ粒子用光子相関装置の製作と性能評価, 粉 体工学会誌, 44(1), 19-27 (2007)
  2. Wang, W. N, S. G. Kim, I. W. Lenggoro and K. Okuyama: Polymer-assisted Annealing of Spray-pyrolyzed Powders for Formation of Luminescent Particles with Submicron and Nanometer sizes, J. Am. Ceram. Soc., 90(2), 425-432 (2007)
  3. Ogi, T., L. B. Modesto-Lopez, F. Iskandar and K. Okuyama: Fabrication of a large area monolayer of silica particles on a sapphire substrate by a spin coating method, Colloid Surf. A-Physicochem. Eng. Asp., 297 (1-3), pp. 71-78 (2007)
  4. Purwanto, A., W.-N. Wang, I. W. Lenggoro and K. Okuyama: Formation and Luminescence Enhancement of Agglomerate-Free YAG:Ce3+ Submicron Particles by Flame Assisted Spray Pyrolysis, J. Eelectrochem. Soc., 154(3), J91-J96 (2007)
  5. Fisenko, S. P., W.-N. Wang, M. Shimada and K. Okuyama: Vapor Condensation on Nanoparticles in The Mixer of a Particle Size Magnifier, Int. J. Heat Mass Transf., 50(11-12), 2333-2338 (2007)
  6. Wang,W.-N., Widiyastuti, I.W. Lenggoro, T.-O. Kim and K. Okuyama: Photoluminescence Optimization of Luminescent Nanoomposites by Spray Pyrolysis of a Colloid-Solution Precursor, J. Eelectrochem. Soc., 154(4), J121-J128 (2007)
  7. 小山博巳, 井川誠司, 明星敏彦, 奥山喜久夫: 大容量微分型静電分級器(DMA)の開発と分級 性能評価, エアロゾル研究, 22(1), 48-53, (2007)
  8. Lee, H. M., S. G. Kim, I. Matsui, T. Iwaki, F. Iskandar, I. W. Lenggoro and K. Okuyama: Monolayer Deposition of L10 FePt Nanoparticles via Electrospray Route, J. Magn. Magn. Mater., 313 (1), 62-68 (2007)
  9. Lee, H. M., K. Okuyama, A. Mizohata, T. O. Kim. and H. Koyama: Fabrication of Reference Filter for Measurements of EC (Elemental Carbon) and OC (Organic Carbon) in Aerosol Particles, Aerosol Sci. Tech., 41(3), 284-294 (2007)
  10. I. W. Lenggoro, H. Widiyandari, C. J Hogan Jr, P. Biswas and K. Okuyama: Colloidal Nanoparticle Analysis by Nanoelectrospray Size Spectrometry with a Heated Flow, Anal. Chim. Acta, 585, 193-201(2007)
  11. Iskandar, F., A. B. D. Nandiyanto, K. M. Yun, C. J. Hogan Jr., K. Okuyama and P. Biswas: Enhanced Photocatalytic Performance of Brookite TiO2 Macroporous Particles Prepared by Spray Drying with Colloidal Templating, Adv. Mater., 19 (10), 1408-1412 (2007)
  12. Widiyandari, H., C. J. Hogan Jr., K. M. Yun, F. Iskandar, P. Biswas and K. Okuyama: Production of Narrow Size Distribution Polymer-Pigment Nanoparticle Composites via Electrohydrodynamic Atomization, Macromol. Mater. Eng., 292, 495-502 (2007)
  13. Wang, W.-N., Widiyastuti, T. Ogi, I.W. Lenggoro and K. Okuyama: Correlations between Crystallite/Particle Size and Photoluminescence Properties of Submicron Phosphors, Chem. Mater., 19 (7), 1723-1730 (2007)
  14. Akihiro Yabuki, Moritoshi Murakami: Critical Ion Concentration on Pitting and General Corrosion of Copper, Corrosion, Vol. 63, No. 3, 249-257, (2007).
  15. Widiyastuti, W.-N. Wang, I. W. Lenggoro, F. Iskandar and K. Okuyama: Simulation and Experiment of Spray Pyrolysis of Polydisperse Droplets, J. Mater. Res.,  22 (7), 1888-1898 (2007)
  16. Purwanto, A, W.-N. Wang, I.W. Lenggoro and K. Okuyama: Formation of BaTiO3 nanoparticles from an aqueous precursor by flame assisted spray pyrolysis, J. Eur. Ceram. Soc., 27(16), 4489-4497 (2007)
  17. Kim, S. G.,  W.-N. Wang, T. Iwaki, A. Yabuki and K. Okuyama: Low Temperature Crystallization of Barium Ferrite Nanoparticles by a Sodium Citrate-Aided Synthetic Process, J. Phys. Chem. C.,  111 (28), 10175-10180 (2007)
  18. Hogan, C. J.,  K. M. Yun, D. Chen, I. W. Lenggoro, P. Biswas and K. Okuyama: Controlled Size Polymer Particle Production via Electrohydrodynamic Atomization, Colloid and Surf A: Physicochemical and Engineering Aspects, 311 (1-3), 67-76 (2007)
  19. Yun, K. M.,  C. J. Hogan, Y. Matsubayashi, M. Kawabe, F. Iskandar and K. Okuyama: Nanoparticle Filtration by Electrospun Polymer Fibers, Chem. Eng. Sci., 62(17), 4751-4759 (2007)
  20. 荻崇, フェリーイスカン ダル, 矢吹彰広, 奥山喜久夫 : テンプレート材料を用いた二流体ノズル噴霧乾燥法による多孔質から中空粒子への形態制御, 化学工学論文集, 335, pp468-475 (2007)
    Ogi, T., F. Iskandar, A. Yabuki, K. Okuyama: Control of Particle Morphology from Porous to Hollow by Spray-Drying with a Two-Fluid Nozzle and Template Materials, Kagaku Kogaku Ronbunshu, 33(5), 468-475 (2007)
  21. Munir, M. M.,  K. M. Yun, F. Iskandar, A. Yabuki and K. Okuyama: Heating Profile Effect on Morphology, Crystallinity and Photoluminescent Properties of Y2O3:Eu3+ Phosphor Nanofibers Prepared Using an Electrospinning Method, Jpn. J. Appl. Phys. 46 (10 A), 6705-6709 (2007)
  22. Widiyastuti, W., W.-N. Wang, A. Purwanto, I. W. Lenggoro and K. Okuyama: A pulse combustion-spray pyrolysis process for the preparation of nano- and submicron-sized oxide particles, J. Am. Ceram. Soc., 90 (12), 3779-3785, (2007)
  23. Akihiro Yabuki, Hiroyoshi Yamagami, Koji Noishiki: Barrier and self-healing abilities of corrosion protective polymer coatings and metal powders for aluminum alloys, Materials and Corrosion, 58(7), 497-501 (2007)
  24. Akihiro Yabuki, David T. Yasunaga, Toshihiro Shibutani, Kouichi Shinkai, Corrosion of an aluminum alloy chilled in flowing seawater and the effect of cathodic prevention, Materials and Corrosion, 58(5), 340-344 (2007)
  25. Oyabu, T., A. Ogami, Y. Morimoto, M. Shimada, W. Lenggoro, K. Okuyama and I. Tanaka: Biopersistence of Inhaled Nickel Oxide Nanoparticles in Rat Lung, Inhalation Technology, 19(Suppl.1), 55-58 (2007)
  26. 山口哲司, 河原林成行, 奥山喜久夫: 多分散ナノ粒子測定用のラグ付 フィボナッチ数列型指数サンプリング相関器の開発, 粉体工学会誌, 44(12), 846-851, (2007)
    Yamaguchi, T., S. Kawarabayashi, K. Okuyama: Development of an Exponential Sampling Correlator with Lagged Fibonacci Series for Polydisperse Nanoparticles, J. Soc. Powder. Technol. Jpn, 44(12), 846-851 (2007)
  27. 片山和彦, 三浦圭吾, 島田学, 奥山喜久夫: デニューダによるたばこ主流煙の蒸発特性の測定, エ アロゾル研究, 22(4), 322-326, (2007)
    Katayama, K., K. Miura, M. Shimada, K. Okuyama: Measurement of Evaporation Property of Cigarette Main-Stream Smoke Using Denuder Tube Method, Earozoru Kenkyu, 22(4), 322-326 (2007)
  28. Yamaguchi, T., K. Okuyama: Continuous Size Classification of Nanoparticles Utilizing Brownian Motion in Micro Channel Size Exclusion Chromatography, Part. Part. Syst. Charact., 24(6), 424-430 (2007)
  29. Jang, H. D., H. K. Chang and K. Okuyama: Synthesis of Binary Component Metal Oxide Nanoparticles by Flame Spray Pyrolysis, Resources Processing, 54(1), 9-13 (2007)  [368

(2008)

  1. Hayashi, Y.,  M. Shimada and K. Okuyama: Influence of Synthesis Conditions on the Characteristics of Nanoparticles Produced in a Nonequilibrium Plasma Field, J. Chem. Eng. Jpn., 41(2), 62-68 (2008)
  2. Hayashi, Y.,  K. Kondo, M. Shimada and K. Okuyama: Development of a Compact Laser Light Scattering Monitoring Device for Dust Particles Generated during PECVD Process, Earozoru Kenkyu, 23(1), 36-42 (2008)
    林 豊,近藤 郁,島田 学,奥山喜久夫:PECVDプロセスにおける生成 ダスト微粒子のための小型レーザ光散乱モニタリング装置の開発, エアロゾル研究, 23(1), 36-42 (2008)
  3. Ogi, T., Y. Kaihatsu, F. Iskandar, W. N. Wang and K. Okuyama : Facile Synthesis of New Full-Color-Emitting BCNO Phosphors with High Quantum Efficiency, Adv. Mater., 20(17), 3235-3238 (2008)
  4. Purwanto, A., W.-N. Wang, T. Ogi, I. W. Lenggoro, E. Tanabe and K. Okuyama: High Luminance YAG:Ce nanoparticles Fabricated from Urea Added Aqueous Precursor by Flame Process, J. alloys Compd, 463, 350-357 (2008)
  5. Wang, W.N., A. Purwanto, I. W. Lenggoro, K. Okuyama, H. Chang and H. D. Jang: Investigation on the Correlation Between Droplet and Particle Size Distribution in Ultrasonic Spray Pyrolysis, Ind. Eng. Chem. Res., 47 (5), 1650-1659 (2008)
  6. Widiyandari, H., F. Iskandar, N. Hagura and K. Okuyama: Preparation and Characterization of Nano-Pigment - Poly(Styrene-Co-n-Butyl Acrylate-Co-Methacrylic Acid) Composite Particles by High Speed Homogenization-Assisted Suspension Polymerization, J. Appl. polym. Sci., 108(2), 1288-1297 (2008)
  7. Ueda, K., Y. Tsuchida, N. Hagura, F. Iskandar, K. Okuyama and Y. Endo: High Performance of GaN Thin Films Grown on Sapphire Substrates Coated with a Silica-Submicron-Sphere Monolayer Film, Appl. Phys. Lett., 92(10), 101101 (2008)
  8. Munir, M.M., F. Iskandar, K.M. Yun, K. Okuyama and M. Abdullah: Optical and electrical properties of indium tin oxide nanofibers prepared by electrospinning, Nanotechnology, 19, 145603 (2008)
  9. Inkyo, M., Y. Tokunaga, T. Tahara, T. Iwaki, F. Iskandar, C.J. Hogan and K. Okuyama: Beads Mill-Assisted Synthesis of Poly Methyl Methacrylate (PMMA)-TiO2 Nanoparticle Composites, Ind. Eng. Chem. Res., 47, 2597-2604 (2008)
  10. Terashi, Y., A. Purwanto, W. N. Wang, F. Iskandar and K. Okuyama: Role of Urea Addition in the Preparation of Tetragonal BaTiO3 Nanoparticles using Flame Assisted Spray Pyrolysis, J. Eur. Ceram. Soc.,  28, 2573-2580 (2008)
  11. Wang, W.-N., F. Iskandar, K. Okuyama and Y. Shinomiya: Rapid Synthesis of Non-aggregated Fine Chloroapatite Blue Phosphors with High Quantum Efficiency, Adv. Mater., 20(18), 3422-3426 (2008)
  12. Kim, S.-G., N. Hagura, F. Iskandar, A. Yabuki and K. Okuyama: Multilayer film deposition of Ag and SiO2 nanoparticles  using a spin coating process, Thin Solid Films, 516(23), 8721-8725(2008)
  13. 武田正良田 辺栄司, 岩木貫, 矢吹彰広, 奥山喜久夫: TiO2およびBaTiO3ナノ粒子のアクリルモノマーへの高濃度分散による透明ナノコンポジット球形粒子の合成, 粉体工学会誌, 45(1), 23-29 (2008)
  14. Yabuki, A., M. Murakami, Breakaway properties of film formed on copper and copper alloys in erosion-corrosion by mass transfer equation, Materials and Corrosion, 59(1), 25-31 (2008)
  15. Takeda, M., E. Tanabe, T. Iwaki, A. Yabuki and K. Okuyama: High-concentration Transparent TiO2 Nanocomposite Films Prepared from TiO2 Nanosurry Dispersed by Using Beads Mill, Polym., 40(8), 694-699 (2008)
  16. Minami, T., W.-N. Wang, F. Iskandar and K. Okuyama: Photoluminescence Properties of Submicrometer Phosphors with Different Particle/Crystallite Sizes, Jpn. J. Appl. Phys., 47(9), 7220-7223 (2008)
  17. Chang, H., S.-J. Kim, H.-D. Jang, T.-O. Kim and K. Okuyama: Pore size-controlled synthesis and characterization of nanostructured silica particles, Ultramicroscopy. 108(10), 1260-1265, (2008)
  18. Jang, H.-D., H. Chang, K. Cho, S.-J. Kim, J.-H. Park, J.-W. Choi and K. Okuyama.: Fabrication of porous nanostructured TiO2 particles by an aerosol templating method, Ultramicroscopy, 108(10), 1241-1245 (2008)
  19. 山内俊幸, 前川哲也, 瀬戸章文, 權純博, 奥山喜久夫: 静電霧化微粒子水における電荷 数の解析, エアロゾル研究, 23(2), 108-113 (2008)  Yamauchi, T., T. Maekawa, T. Seto, S.-B. Kwon and K. Okuyama: Analysis of the Number Charge in the Fine Water Droplets Produced by Electrostatic Atomization, Earozoru Kenkyu, 23(2), 108-113 (2008)
  20. 山内俊幸, 山名正人, 光武義雄, 前川哲也, 須田 洋, 奥山喜久夫: 静電霧化における放電メカニズムの解析, エ アロゾル研究, 23(4), 263-268 (2008)
  21. Munir, M.M., H. Widiyandari, F. Iskandar and K. Okuyama:  Patterned indium tin oxide nanofiber films and its electrical and optical performance, Nanotechnology, 19, 375601 (2008)
  22. Nandiyanto, A. B. D., F. Iskandar and K. Okuyama: Nano-sized Polymer Particle-Facilitated Preparation of Mesoporous Silica Particles Using a Spray Method, Chemistry Letters, 37(10), 1040-1041 (2008)
  23. Munir, M.M., F. Iskandar, Khairurrijal and K. Okuyama: A constant-current electrospinning system for production of high  quality nanofibers, Rev. Sci. Instrum., 79(12), 093904 (2008)
  24. Hidayat, D., T. Ogi, F. Iskandar and K. Okuyama: Single crystal ZnO:Al nanoparticles directly synthesized using low-pressure spray pyrolysis, Mater. Sci. Eng. B, 151, 231-237 (2008)
  25. 戸田俊行, 林一之, 奥山喜久夫: 磁気記録媒体用ナノサイズバリウムフェライト粒子のカーボン被覆による分散性の改善, 粉体工学会誌, 45(10), 697-701 (2008)
    Toda, T., K. Hayashi and K. Okuyama: Improved Dispersibility of Nano-sized Barium Ferrite Particles by Carbon Coating for Magnetic Recording Media, J. Soc. Powder. Technol. Jpn., 45(10), 697-701 (2008)
  26. Purwanto, A., Hidayat, D., Terashi, Y., Okuyama, K.: Synthesis of Monophasic CaxBa(1-x)TiO3 Nanoparticles with High Ca content (x > 23%) and Their Photoluminescence Properties, Chem. Mater., 20 (24), 7440-7446 (2008) 
  27. A.Yabuki and R. Kaneda: Barrier and self-healing coating with fluoro-organic compound for zinc, Mater. Corros., 59, 9999 (2008)

(2009)

  1. Lee, S. Y., W. Widiyastuti, N. Tajima, F. Iskandar and K. Okuyama: Measurement of the effective density of both spherical aggregated and ordered porous aerosol particles using mobility- and mass-analyzers, Aerosol Sci. Technol., 43, 136-144 (2009)
  2. Ogi, T., Y. Kaihatsu, F. Iskandar, E. Tanabe and K. Okuyama : Synthesis of nanocrystalline GaN from Ga2O3 nanoparticles derived from salt-assisted spray pyrolysis , Adv. Powder Technol., 20(1), 29-34 (2009).
  3. Iskandar F., S. G. Kim, A.B.D. Nandiyanto, Y. Kaihatsu, T. Ogi and K. Okuyama: Direct synthesis of hBN/MWCNT composite particles using spray pyrolysis, J. Alloys Compd, 471, 166-171 (2009)
  4. Kim, S. G., N. Hagura, F. Iskandar and K. Okuyama: Characterization of silica-coated Ag nanoparticles synthesized using a water-soluble nanoparticle micelle, Adv. Powder Technol., 20, 94-100 (2009)
  5. Endo, Y., C. L. Y. Ngan, A. B. D. Nandiyanto, F. Iskandar and K. Okuyama: Analysis of fluid permeation through a particle-packed layer using an electric resistance network as an analogy, Powder Technology, 191(1-2), 39-46 (2009)
  6. Ogi, T., D. Hidayat, F. Iskandar, A. Purwanto and K. Okuyama: Direct synthesis of highly crystalline transparent conducting oxide nanoparticles by low pressure spray pyrolysis, Adv. Powder Technol., 20(2), 203-209 (2009)
  7. A.Yabuki and R. Kaneda: Barrier and self-healing coating with fluoro-organic compound for zinc, Materials and Corrosion, 60(6), 444-449 (2009)
  8. Widiyastuti, W., A. Purwanto, W. N. Wang, F. Iskandar, H. Setyawan, and K. Okuyama: Nanoparticle Formation through Solid-Fed Flame Synthesis: Experiment and Modeling, AIChE J., 55(4), 885-895 (2009)
  9. Iskandar, F., A.B.D. Nandiyanto, W. Widiyastuti, S. Y. Lee, K. Okuyama, L. Gradon: Production of Morphology-Controllable Porous Hyaluronic Acid Particles using a Spray Drying Method, Acta Biomaterialia, 5(4), 1027-1034 (2009)
  10. Kim, S. G., Y. Terashi, A. Purwanto and K. Okuyama: Synthesis and Film Deposition of Ni Nanoparticles for Base Metal Electrode Applications, Colloids Surf., A, 337(1-3), 96-101 (2009)
  11. Y. Kaihatsu, F. Iskandar, H. Widiyandari, W. N. Wang and K. Okuyama: Fabrication and Characterization of A Yellow-Emitting BCNO Phosphor for White Light-Emitting-Diodes, Electrochem. Solid State Lett., 12(3), 33-36 (2009)
  12. Widiyastuti, W., S. Y. Lee, F. Iskandar and K. Okuyama: Sintering behavior of spherical aggregated nanoparticles prepared by spraying colloidal precursor in a heated flow, Adv. Powder Technol., 20(4), 318-326 (2009)
  13. Widiyastuti, W., T. Minami, W. N. Wang, F. Iskandar, and K. Okuyama, Photoluminescence Characteristics of Macroporous Eu-doped Yttrium Oxide Phosphor Particles Prepared by Spray Pyrolysis, Jpn. J. Appl. Phys., 48, 032001 (2009)
  14. Nandiyanto, A.B.D., S. G. Kim, F. Iskandar, K. Okuyama: Synthesis of Spherical Mesoporous Silica Nanoparticles with Nanometer-Size Controllable Pores and Outer Diameters, Microporous Mesoporous Mater., 120(3), 447-453 (2009)
  15. Munir, M. M., F. Iskandar, Khairurrijal and K. Okuyama: High performance electrospinning system for fabricating highly uniform polymer nanofibers, Rev. Sci. Instrum., 80, 026106 (2009)
  16. Suryamas, A. B., M. M. Munir, F. Iskandar and K. Okuyama: Photoluminescent and crystalline properties of Y3-xAl5O12:Cex3+ phosphor nanofibers prepared by electrospinning, J. Appl. Phys., 105, 064311 (2009)
  17. Widiyandari, H., M. M. Munir, F. Iskandar and K. Okuyama: Morphology-controlled synthesis of chromia-titania nanofibers via electrospinning followed by annealing, Mater. Chem. Phys., 116(1), 169-174 (2009)
  18. Nandiyanto, A. B. D., F. Iskandar and K. Okuyama: Macroporous Anatase Titania Particle: Aerosol Self-Assembly Fabrication with Photocatalytic Performance, Chem. Eng. J., 152, 293-298 (2009)
  19. Takeda, M., E. Tanabe, T. Iwaki, A. Yabuki and K. Okuyama: Preparation of Nanocomposite Microspheres Containing High Concentration of TiO2 Nanoparticles via Bead Mill Dispersion in Organic Solvent, Chemistry Letters, 38(5), 448-449 (2009)
  20. Yun, K. M., A. B. Suryamas, C. Hirakawa, F. Iskandar and K. Okuyama: A new physical route to produce monodispersed microsphere nanoparticle-polymer composites, Langmuir, 25(18), 11038-11042 (2009)
  21. Nandiyanto, A. B. D., Y. Kaihatsu, F. Iskandar and K. Okuyama: Rapid Synthesis of a BN/CNT Composite Particle via Spray Routes using Ferrocene/Ethanol as a Catalyst/Carbon Source, Mater. Lett., 63(21), 1847-1850 (2009)
  22. Joni, I M., A. Purwanto, F. Iskandar and K. Okuyama: Dispersion stability enhancement of titania nanoparticles in organic solvent using a bead mill process, Industrial & Engineering Chemistry Research, 48(15), 6916-6922 (2009)
  23. Joni, I M., A. Purwanto, F. Iskandar, M. Hazata and K. Okuyama: Intense UV-light absorption of ZnO nanoparticles prepared using a pulse combustion-spray pyrolysis method, Chem. Eng. J., 155(1-2), 433-441 (2009)
  24. Wang, W. N., Y. Kaihatsu, F. Iskandar and K. Okuyama: Chemical and photoluminescence analyses of new carbon-based boron oxynitride phosphors, Mater. Res. Bull., 44(11), 2099-2102 (2009)
  25. 川部雅章、フェリー・イスカンダル、奥山喜久夫: ポリプロピレン不織布エレクトレッ トフィルタの帯電過程、静電気学会誌、33(5), 213-219 (2009)
    Kawabe, M., F. Iskandar and K. Okuyama: Corona Charging Process for Polypropylene Electret Filter, J. Institute Electrostatics Japan, 33(5), 213-219 (2009)
  26. Yun, K. M., S. Y. Lee, F. Iskandar, K. Okuyama, N. Tajima: Effect of X-ray energy and ionization time on the charging performance and nanoparticle formation of a soft X-ray photoionization charger, Adv. Powder Technol., 20(6), 529-536 (2009)
  27. Shimada, M., W. N. Wang, K. Okuyama, T. Myojo, T. Oyabu, Y. Morimoto, I. Tanaka, S. Endoh, K. Uchida, K. Ehara, H. Sakurai, K. Yamamoto, J. Nakanishi: Development and evaluation of an aerosol generation and supplying system for inhalation experiments of manufactured nanoparticles, Environ. Sci. Technol., 43(14) 5529-5534 (2009)
  28. Hagura, N., A. B. D. Nandiyanto, F. Iskandar and K. Okuyama: A Role of Template Surface Charge in the Preparation of Porous and Hollow Particle Using a Spray-drying Method, Chem. Lett., 38(11), 1076-1077 (2009)
  29. Munir, M. M., A.B.Suryamas, F. Iskandar and K. Okuyama: Scaling law on particle to fiber formation during electrospinning, Polymer, 50(20), 4935-4943 (2009)
  30. Purwanto, A., H. Widiyandari, D. Hidayat, F. Iskandar and K. Okuyama: Facile Method for the Fabrication of Vertically Aligned ITO Nanopillars with Excellent Properties, Chem. Mater., 21, 4087-4089 (2009)
  31. Lee, S. Y., W. Widiyastuti,  F. Iskandar, K. Okuyama, Leon Gradon: Morphology and particle size distribution controls of droplet-to-macroporous/hollow particles formation in spray drying process of colloidal mixtures precursor, Aerosol Sci. Technol., 43(12), 1184-1191 (2009)
  32. Wang, W. N., Y. Kaihatsu, F. Iskandar and K. Okuyama: Highly Luminous Hollow Chloroapatite Phosphors Formed by a Template-Free Aerosol Route for Solid-State Lighting, Chem. Mater., 21(19), 4685-4691 (2009)
  33. 杉村健一, T.M.D. Nguyen, F. Iskandar, 奥山 喜久夫: 噴霧乾燥法によるNi/BaTiO3 コアシェル粒子の合成, 粉体工学会誌, 46(11), 813-818 (2009)
    Sugimura K., T.M.D. Nguyen, F. Iskandar, K. Okuyama: Preparation of Ni/BaTiO3 Core-shell Particle by Spray Drying Process, J. Soc. Powder. Technol. Jpn., 46(11), 813-818 (2009)
  34. Takeda, M., E. Tanabe, T. Iwaki, A. Yabuki, K. Okuyama: Importance of dispersibility of TiO2 in preparation of TiO2-dispersed microspheres by Shirasu porous glass (SPG) membrane emulsification, Adv. Powder Technol., 20(4), 361-365 (2009)
  35. Yabuki, A.: New-wall hydrodynamic effects related to flow-induced localized corrosion, Materials and Corrosion 60(7), 501-506 (2009)
  36. Yabuki, A., M. Sakai: Anodic films formed on magnesium in organic, silicate-containing electrolytes, Corrosion Science, 51(4), 793-798 (2009)

(2010)

  1. Nandiyanto, A. B. D., N. Hagura, F. Iskandar and K. Okuyama: Design of a Highly Ordered and Uniform Porous Structure with Multisized Pores in Film and Particle form using a Template-driven Self-Assembly Technique, Acta Mater., 58(1), 282-289 (2010)
  2. Hagura, N., W. Widiyastuti, F. Iskandar and K. Okuyama: Characterization of Silica-coated Silver Nanoparticles Prepared by a Reverse Micelle and Hydrolysis-condensation Process, Chem. Eng. J., 156(1), 200-205 (2010)
  3. Hidayat, D., A. Purwanto, W. N. Wang and K. Okuyama: Preparation of size-controlled tungsten oxide nanoparticles and evaluation of their adsorption performance, Mater. Res. Bull., 45(2), 165-173 (2010)
  4. Iskandar, F., A. B. Suryamas, M. Kawabe, M. M. Munir and K. Okuyama, T. Tarao and T. Nishitani: Indium Tin Oxide Nanofiber Film Electrode for High Performance Dye Sensitized Solar Cells, Jpn. J. Appl. Phys., 49, 010213 (2010)
  5. Widiyastuti, W., R. Balgis, F. Iskandar and K. Okuyama: Nanoparticle Formation in Spray Pyrolysis Under Low-Pressure Conditions, Chem. Eng. Sci., 65(5), 1846-1854 (2010)
  6. Kaihatsu, Y., W. N. Wang, F. Iskandar and K. Okuyama: Controlled Synthesis of Carbon-based Alumina Nanophosphors with Tunable Blue-Green Luminescence, Mater. Lett., 64(7), 836-839 (2010)
  7. Widiyastuti, W., D. Hidayat, A. Purwanto, F. Iskandar and K. Okuyama: Particle Dynamics Simulation of Nanoparticle Formation in a Flame Reactor using a Polydispersed Submicron-Sized Solid Precursor, Chem. Eng. J., 158(2), 362-367 (2010)
  8. Hidayat, D., W. Widiyastuti, T. Ogi and K. Okuyama: Droplet generation and nanoparticle formation in low-pressure spray pyrolysis, Aerosol Sci. Technol., 44(8), 692-705 (2010)
  9. Nandiyanto, A.B.D., F. Iskandar, T. Ogi and K. Okuyama: Nanometer to Submicrometer Magnesium Fluoride Particles with Controllable Morphology, Langmuir, 26(14), 12260-12266 (2010)
  10. Yabuki, A., N. Arriffin: Electrical conductivity of copper nanoparticle thin films annealed at low temperature, Thin Solid Films, 518(23) 7033-7037 (2010).
  11. Kaihatsu, Y., W. N. Wang, F. Iskandar, T. Ogi and K. Okuyama: Effect of the Carbon Source on the Luminescence Properties of Boron Carbon Oxynitride Phosphor Particles, J. Electrochem. Soc., 157(10), J329-J333 (2010)
  12. Lee, S.-Y., L. Gradon, S. Janeczko, F. Iskandar and K. Okuyama: Formation of Highly Ordered Nanostructures by Drying Micrometer Colloidal Droplets, ACS Nano, 4(8), 4717-4724 (2010)
  13. Joni, I M., T. Nishiwaki, K. Okuyama, S. Isoi and R. Kuribayashi: Enhancement of the thermal stability and the mechanical properties of a PMMA/aluminum trihydroxide composite synthesized via bead milling, Powder Technology, 204, 145-153, (2010).
  14. Shimada, M., W.-N. Wang and K. Okuyama: Synthesis of Gallium Nitride Nanoparticles by Microwave Plasma-Enhanced CVD, Chem. Vapor Depos., 16(4-6), 151-156 (2010)
  15. M. M. Munir, A. Suhendi, T. Ogi, F. Iskandar, *K. Okuyama: Experimental evaluation of the pressure and temperature dependence of ion-induced nucleation , J. Chem. Phys., 133, 124315-1-124315-8 (2010)
  16. Suryamas, A.B., M. M. Munir, T. Ogi, C. J. Hogan Jr., and K. Okuyama: Photoluminescent ZrO2:Eu3+ Nanofibers Prepared via Electrospinning. Jpn. J. Appl. Phys., 49(2010)115003.
  17. Yun, K.M., A.B. Suryamas, F. Iskandar, L. Bao, H. Niinuma, and K. Okuyama: Morphology optimization of polymer nanofiber for applications in aerosol particle filtration, Sep. Purif. Technol., Sep. Purif. Technol., 75, 340-345 (2010).
  18. 岩松正, 平川千佳, 中井祥二, 荻崇, 奥山喜久夫: 静電噴霧法による無機・有機 コンポジット粒子の合成, 粉体工学会誌, 47(12), 820-825 (2010)
    T. Iwamatsu, C. Hirakawa, S. Nakai, T. Ogi, K. Okuyama: Preparation of Inorganic/Polymer Composite Particles by Electrospray, J. Soc. Powder. Technol. Jpn., 47(12), 820-825 (2010)

(2011)

  1. Hagura N., T. Takeuchi, S. Takayama, F. Iskandar, and K. Okuyama: Enhanced photoluminescence of ZnO-SiO2 nanocomposite particles and the analyses of structure and composition, J. Lumin., 131(1), 138-146 (2011)
  2. Yabuki, A., W. Urushihara, J. Kinugasa, K. Sugano: Self-healing properties of TiO2 particle-polymer composite coatings for protection of aluminum alloys against corrosion in seawater, Materials and Corrosion, 62 (10), 907912 (2011). (DOI: 10.1002/maco.201005756)
  3. Nandiyanto, A.B.D. and K. Okuyama: Progress in Developing Spray-drying Methods for the Production of Controlled Morphology Particles: From the Nanometer to Submicrometer Size Ranges, Adv. Powder Technol., 22, 1-19 (2011).
  4. 荻崇, 蒔田顕輔, 玉置洸司郎, 斎藤範三, 小西康裕: 還元細菌Shewanella oneidensisを用いたAu(III) イオンの還元・ナノ粒子化, 粉体工学会誌, 4(3),160-166 (2011).
    T. Ogi, K. Makita, K. Tamaoki, N. Saitoh, Y. Konishi: Synthesis of gold nanoparticle by the metal ion-reducing bacterium Shewanella coneidensis, J. Soc. Powder. Technol. Jpn., 4(3),160-166 (2011).
  5. Nandiyanto, A.B.D., T. Ogi, F. Iskandar, and K. Okuyama: Highly Ordered Porous Monolayer Generation by Dual-Speed Spin-Coating with Colloidal Templates, Chem. Eng. J., 167, 409-415 (2011).
  6. A. Purwanto, H. Widiyandari, T. Ogi and K. Okuyama: Role of Particle Size for Platinum-Loaded Tungsten Oxide Nanoparticles during Dye Photodegradation under Solar-Simulated Irradiation, Catal. Commun., 12, 525-529(2011)
  7. Joni, I M., T. Ogi, A. Purwanto, K. Okuyama, T. Saitoh and Kazutaka Takeuchi: Decolorization of beads-milled TiO2 nanoparticles suspension in an organic solvent, Adv. Powder Technol., in press.
  8. Hagura N., T. Ogi, T. Shirahama, F. Iskandar, and K. Okuyama: Highly luminescent silica-coated ZnO nanoparticles dispersed in an aqueous medium, J. Lumin. 131 (5), 921925 (2011). (doi:10.1016/j.jlumin.2010.12.024)
  9. A. Yabuki, M. Sakai: Self-Healing Coatings of Inorganic Particles using a pH-Sensitive Organic Agent, Corrosion Science, 53(2), 829-833 (2011).
  10. 矢吹彰広, 河島聡洋: 塩化ナトリウム粒子スラリーによる銅合金の浸食, 日本海 水学会誌, 65, 81-87 (2011).
  11. A. Yabuki:Particle-Induced Damage and Subsequent Healing of Materials: Erosion, Corrosion and Self-healing Coatings, Advanced Powder Technology, 22, 303-310 (2011).
  12. T. Ogi , R. Honda, K. Tamaoki, N. Saitoh and Y. Konishi: Direct room-temperature synthesis of a highly dispersed Pd nanoparticle catalyst and its electrical properties in a fuel cell, Powder Technology , 36(4) 288-292 (2011).
  13. W.-N. Wang, T. Ogi, Y. Kaihatsu, F. Iskandar, and K. Okuyama: Novel Rare-Earth-Free Tunable-Color-Emitting BCNO Phosphors, Journal of Materials Chemistry, 21, 5183-5189 (2011), Advance Article, DOI: 10.1039/C0JM02215B, Highlight.
  14. R. Balgis, F. Iskandar, T. Ogi, A. Purwanto, K. Okuyama: Synthesis of Uniformly Porous NiO/ZrO2 Particles, Mater. Res. Bull., 46, (5), 708715 (2011). (doi:10.1016/j.materresbull.2011.01.019)
  15. S. Y. Lee, H. Chang, T. Ogi, F. Iskandar and K. Okuyama: Measuring the Effective Density, Porosity, and Refractive Index of Carbonaceous Particles by Tandem Aerosol Technique, Carbon, 49, 2163-2172 (2011).
  16. 田原 隆志, 院去 貢, 今城 祐二, 奥山 喜久夫: 2 軸ビーズミルによるチタニアナノ粒子の低エネルギー分散特性, 紛体工学会誌,48 (4), 198-205 (2011).
  17. A.B. Suryamas, M.M. Munir, T. Ogi, Khairurrijal and K. Okuyama: Intense green and yellow emissions from electrospun BCNO phosphor nanofibers, J. Mater. Chem., 21, 1262912631, (2011).
  18. Y. Morimoto, T. Oyabu, A. Ogami, T. Myojo, E. Kuroda, M. Hirohashi, M. Shimada, W. Lenggoro, K. Okuyama and I. Tanaka: Investigation of Gene Expression of MMP-2 and TIMP-2 mRNA in Rat Lung in Inhaled Nickel Oxide and Titanium Dioxide Nanoparticles, Industrial Health, 49, 344-352 (2011).
  19. 衣笠 潤一郎, 漆原 亘, 矢吹 彰広: 氷点近傍海水の流動下におけるAl-Zn合金溶射皮膜の腐食, 材料と環境, 60 (10), 457-461 (2011).
  20. A. Yabuki, N.Arriffin, M. Yanase: Low-temperature synthesis of copper conductive film by thermal decomposition of copper-amine complexes, Thin Solid Films, 519, 6530-6533 (2011).
  21. 矢吹彰広,田邊翔太: 高吸水性ポリマーと腐食抑制剤を用いた自己修復性防食コーティング,材料と環境, 60 (10), 438-440 (2011).
  22. A. Yabuki, T. Nishisaka: Self-healing capability of porous polymer film with corrosion inhibitor inserted for corrosion protection, Corrosion Science 53(12), 4118-4123 (2011).
  23. I. M. Joni, R. Balgis, T. Ogi, K. Okuyama: Surface functionalization for dispersing and stabilizing hexagonal boron nitride nanoparticle by bead milling, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 388, (13), 4958 (2011). (doi:10.1016/j.colsurfa.2011.08.007)
  24. I. Matsui, T. Ogi, F. Iskandar, K. Okuyama: Perpendicular easy axis alignment of FePt nanoparticles on a platinum-(001) substrate for high -density magnetic recording, Journal of Applied Physics, 110, 083906 (2011).
  25. A. Yabuki, S. Tanaka: Oxidation Behavior of Copper Nanoparticles at Low Temperature, Materials Research Bulletin, 46 (12), 2323-2327 (2011). (DOI: 10.1016/j.materresbull.2011.08.043)
  26. 矢吹彰広,奥野弘尚: アルミニウムにおけるポリマーコーティングの自己修復性防食作用,軽金属, accepted (2011).
  27. A. B. D. Nandiyanto, T. Ogi, A. Ohmura, E. Tanabe, and K. Okuyama: Liquid-phase synthesis of CaF2 particles and their low refractive index characterization, KONA, 29, 141-157 (2011).
  28. T. Ogi, K. Tamaoki, N. Saitoh, A. Higashi and Y. Konishi: Recovery of indium from aqueous solutions by the Gram-negative bacterium Shewanella algae, Biochemical Engineering Journal, in press (2011). (doi:10.1016/j.bej.2011.11.008)

 

(2012)

  1. H. Widiyandari, A. Purwanto, R. Balgis, T. Ogi and K. Okuyama: CuO/WO3 and Pt/WO3 Nanocatalysts for Efficient Pollutant Degradation using Visible Light Irradiation, Chemical Engineering Journal (IP=3.074), 180 (15), 323329 (2012). (doi:10.1016/j.cej.2011.10.095)
  2. R. Balgis, G. M. Anilkumar, S. Sago, T. Ogi and K. Okuyama: Nanostructured design of electrocatalyst support materials for high performance PEM fuel cells applications, Journal of Power Sources, 203, 2633 (2012). (doi:10.1016/j.jpowsour.2011.11.064)
  3. A. B. Nandiyanto, A. Suhendi, T. Ogi, T. Iwaki and K. Okuyama: Synthesis of Additive-free Cationic Polystyrene Particles with Controllable Size for Hollow Template Applications, Colloids and Surfaces A: Physicochemical and Engineering Aspects, in press (2012). (doi:10.1016/j.colsurfa.2011.12.048)
  4. T. Ogi*, Y. Kisakibaru, Y. Kaihatsu, W.N. Wang, M. M. Munir, K. Okuyama: Preparation and characterization of boron oxide based red-emitting phosphors using Eu, Al and Ca additives, Materials Chemistry and Physics, in press(2012).

 


| Lab.HOME | List.2001-2005 | 1991-2000 | 1973-1990 | Annually | Reviews | Book |

説明: 説明: 説明: 説明: 説明: 説明: 説明: 説明: 説明: 説明: 説明: 説明: 説明: 説明: 説明: 説明: 説明: 説明: 説明: 説明: 説明: C:\Documents and Settings\住職\デスクトップ\研究室レジメ\HP\pub_files\acclog.gif