List of Publications (Kunihiro FUKUI)

Journal Articles

2014年
1)  Yoshida, H, H. Sugasawa, K. Fukui, T. Yamamoto, H. Masuda : "Theoretical calculation of uncertainty region for spherical particles based on a picket fence, quasi-monodisperse particles," Advanced Powder Technology, 25(2), 524-529 (2014)
2)  松沢 光晴, 高井 健次, 坂本 裕太郎, 村上 公威, 福井 国博, 山本 徹也, 吉田 英人 : "電場印加型の垂直流型水篩による微粒子の高精度分級," 粉体工学会誌, 51(9), 614-622 (2014)
3) 
竹田 尚広, 忍足 輝男, 山本 徹也, 福井 国博, 吉田 英人 : "乾式サイクロンの入口清浄空気および案内羽根が粒子分級性能に与える影響," 粉体工学会誌, 51(2), 68-76 (2014)


2013年
1)  Fukui, K., M. Katoh, Y. Saeki, T. Yamamoto and H. Yoshida : "Effect of packing fraction on indium tin oxide powder synthesis via a solid-phase reaction with microwave heating," Chemical Engineering Science, 98, 17-24 (2013)
2)  Yoshida, H., T. Tatekawa, K. Fukui, T. Yamamoto, K. Takai and M. Matsuzawa : "A new method of zeta-potential measurement by the use of the sedimentation balance method," Powder Technology, 237, 303-308 (2013)
3)  Hiraiwa, Y., T. Oshitari, K. Fukui, T. Yamamoto and H. Yoshida : "Effect of free air inflow method on fine particle classification of gas-cyclone," Separation and Purification Technology, 118, 670-679 (2013)

2012

1)  Yoshida, H., Y. Hayase, K. Fukui and T. Yamamoto : "Effect of conical length on separation performance of sub-micron particles by electrical hydro-cyclone," Powder Technology, 219, 29-36 (2012)
2)  Yoshida, H., T. Yamamoto, K. Fukui and H. Masuda : "Theoretical calculation of uncertainty region based on the general size distribution in the preparation of standard reference particles for particle size measurement," Advanced Powder Technology, 23(2), 185-190 (2012)
3) 村重 佳奈, 福井 国博, 西田 幸生, 山本 徹也, 吉田 英人 : "焼結金属製円錐を持つ液体サイクロンの分級特性," 粉体工学会誌, 49(5), 367-373 (2012)
4)  Fukui, K., Y. Igawa, N. Arimitsu, M. Suzuki, T. Segawa, K. Fujii, T. Yamamoto and H. Yoshida  : "Mechanism of synthesis of metallic oxide powder from aqueous metallic nitrate solution by microwave denitration method," Chemical Engineering Journal, 211-212, 1-8 (2012)

2011年
1)  Fukui, K., H. Yoshida, K. Jikihara and T. Yamamoto : "Effects of clean-air injection on particle-separation performance of novel cyclone with sintered metal cone," Separation and Purification Technology, 80(2), 356-363 (2011)
2)  Yamamoto, T., T. Shinya, K. Fukui and H. Yoshida : "Classification of particles by centrifugal separator and analysis of the fluid behavior," Advanced Powder Technology, 22(2), 294-299 (2011)
3)  Romanus Krisantus Tue Nenu, S. Izumi, H. Yoshida, K. Fukui and T. Yamamoto : "Separation of Unburned Carbon in Fly Ash Particles Using Special Louver Separator," Journal of Chemical Engineering of Japan, 44(3), 146-154 (2011)
4)  Yamamoto, T., T. Tatekawa, K. Fukui and H. Yoshida : "Enhancement of the Classification Performance of Electrical Field-Flow Fractionation Using Horizontal Electrophoresis," Journal of Chemical Engineering of Japan, 44(6), 398-404 (2011)
5) 重森 一葉, 山本 徹也, 福井 国博, 吉田 英人 : "局所的な静電場印加及び流動制御を利用した液体サイクロンの高性能化", 粉体工学会誌, 48(8), 526-533 (2011)
6) 竹田 尚広, 西村 祐介, 小澤 和三, 山本 徹也, 福井 国博, 吉田 英人 : "改良型の乾式サイクロンによる粒子分離性能の向上", 粉体工学会誌, 48(12), 840-846 (2011)

2010年
1)  Yoshida, H., Y. Nishimura, K. Fukui and T. Yamamoto : "Effect of apex cone shape on fine particle classification of gas-cyclone," Powder Technology, 204, 54-62 (2010)
2)  Yamamoto, T., Y. Harada, K. Fukui and H. Yoshida : "AFM investigation of the surface properties of silica particles dispersed by bead milling," COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 362(1-3), 97-101 (2010)

2009年
1)  Fukui, K., N. Arimitsu, S. Kidoguchi, T. Yamamoto and H. Yoshida : "Synthesis of Calcium Phosphate Hydrogel from Waste Incineration Ash and Bone Powder," J. of Hazardous Materials, 163, 391-395 (2009)
2)  Fukui, K., M. Katoh, T. Yamamoto and H. Yoshida : "Utilization of NaCl for Phillipsite Synthesis from Fly Ash by Hydrothermal Treatment with Microwave Heating," Advanced Powder Technology, 20(1), 35-40 (2009)
3)  Fukui, K., S. Kidoguchi, N. Arimitsu, K. Jikihara, T. Yamamoto and H. Yoshida : "Synthesis of Calcium Phosphate Hydrogel from Waste Incineration Ash and its Application to Fuel Cell," J. of Environmental Management, 90, 2709-2717 (2009)
4)  Yamamoto, T., N. Watanabe, K. Fukui and H. Yoshida : "Effect of inner structure of centrifugal separator on particle classification performance," Powder Technology, 192(3), 268-272 (2009)
5)  Yoshida, H., Y. Inada, K. Fukui and T. Yamamoto : "Improvement of gas-cyclone performance by use of local fluid flow control method," Powder Technology, 193, 6-14 (2009)
6)  Fukui, K., N. Arimitsu, K. Jikihara, T. Yamamoto and H. Yoshida : "Performance of fuel cell using calcium phosphate hydrogel membrane prepared from waste incineration ash and chicken bone powder," J. of Hazardous Materials, 168, 1617-1621 (2009)
7) 金子幸生, 山本徹也, 福井国博, 吉田英人 : "改良型の軸流サイクロンを用いた集塵及び脱硫性能の検討", 粉体工学会誌, 46(9), 681-687 (2009)
8)  Fukui, K., K. Kanayama, M. Katoh, T. Yamamoto and H. Yoshida : "Synthesis of indium tin oxide powder by solid-phase reaction with microwave heating," Advanced Powder Technology, 20(5), 488-492 (2009)
9)  Romanus Krisantus Tue Nenu, H. Yoshida, K. Fukui and T. Yamamoto : "Separation performance of sub-micron silica particles by electrical hydrocyclone," Powder Technology, 196, 147-155 (2009)
10)  Yamamoto, T., Y. Harada, K. Fukui and H. Yoshida : "Classification of Particles Dispersed by Bead Milling Using Electrical Field-Flow Fractionation," Journal of Chemical Engineering of Japan, 42(10), 720-727 (2009)

2008年
1) 福井国博, 木戸口聡, 有満直樹, 山本徹也, 吉田英人 : "一般廃棄物焼却飛灰のリン酸カルシウムハイドロゲルへの再資源化", 化学工学論文集, 34(2), 304-308 (2008)
2)  Yoshida, H., S. Yoshikawa, K. Fukui and T. Yamamoto : "Effect of multi-inlet flow on particle classification performance of hydro-cyclones," Powder Technology, 184, 352-360 (2008)
3)  Yoshikawa, S., K. Romanus, K. Fukui, Y. Tetsuya and H. Yoshida : "Effect of Multi-Inlet Flow on Particle Classification Performance of Hydro-Cyclones and New Estimating Equation," J. of Chemical Engineering of Japan, 41(8), 756-765 (2008)
4) 福井国博, 直原健司, 木戸口聡, 有満直樹, 山本徹也, 吉田英人 : "一般廃棄物焼却飛灰のリン酸カルシウムハイドロゲルへの再資源化に与える前処理の影響", 粉体工学会誌, 45(10), 684-689 (2008)
5)  Pratarn, W., T. Wiwut, H. Yoshida and K. Fukui : "Effect of pH of fine silica suspension and central rod diameter on the cut size of an electrical hydro-cyclone with and without underflow," Separation and Purification Technology, 63, 452-459 (2008)

2007年
1) 信清良太, 稲田勇太, 福井国博, 吉田英人 : "局所的な流動制御を利用した乾式サイクロンの高性能化," 化学工学論文集, 33(2), 92-100 (2007)
2) 山本徹也, 新屋智彦, 福井国博, 吉田英人 : "遠心分離機による微粒子の分級とその流動解析," 粉体工学会誌, 44(5), 345-352 (2007)
3)  Fukui, K., K. Kanayama, T. Yamamoto and H. Yoshida : "Effects of microwave irradiation on the crystalline phase of zeolite synthesized from fly ash by hydrothermal treatment," Advanced Powder Technology, 18(4), 381-393 (2007)
4) 山本徹也, 小谷俊枝, 福井国博, 吉田英人 : "出口構造改良型遠心分離機による微粒子の分級", 粉体工学会誌, 44(12), 861-867 (2007)

2006年以前・・・Under Construction

Conference Abstracts

2014年
1) Fukui, K. : "Application of microwave heating to powder synthesis process," Taiwan-Japan Joint Seminar on Particle Technology 2014, September 22, Taipei, Taiwan (2014)

2013年
1) Yoshida,H., Y. Nakatuka, T. Yamamoto, K. Fukui, M. Matuzawa and K. Takai : "New method of zeta-potential measurement by use of the sedimentation balance method,” 10th International Symposium on Agglomeration, Agglos10, Kobe, Japan, O-26, September 2-4 (2013)
2) Segawa, T., M. Suzuki, K. Fujii, K. Fukui, Y. Igawa, T. Yamamoto and H. Yoshida : " Development of Synthesis Process of Nickel Oxide Powder by Microwave Denitration Method," pp.618, TuP-T3-187, 9th World Congress of Chemical Engineering (WCCE9), August 18-23, Seoul, Korea (2013)
3) 吉田英人, 中塚祐太, 村上公威, 坂本裕太郎, 福井国博, 山本徹也 : "沈降天秤を利用した新型の粒子ゼータ電位測定装置の試作及び湿式分級への利用," 204, FILTRATION & SEPARATION SYMPOSIUM in collaboration with INCHEM TOKYO 2013, October 31-November 1, Tokyo, Japan (2013)

2012年
1)
 Fukui, K., K. Jikihara, K. Murashige, T. Yamamoto and H. Yoshida : "Effect of Clean-air Injection through Porous Sintered Metal Cone on Classification Performance of Novel Cyclone," Session 1-C, 099, 5th Asian Particle Technology Symposium APT2012, July 5-5, Singapore (2012)
2)  Fukui, K., K. Jikihara, T. Yamamoto and H. Yoshida : "Control of classification performance of novel cyclone with sintered metal by clean-air injection," P1-35, 212, 20th International Congress of Chemical and Process Engineering CHISA 2012, August 25-29, Prague, Czech Rpublic (2012)

2011
1)  Yoshida, H., T. Yamamoto and K. Fukui : "Theoretical Calculation of Uncertainty Region Based on the General Size Distribution in the Preparation of Standard Reference Particles for Particle Size Measurement," pp.1-6, Particultate Systems Analysis PSA-2011, September 5-7, Edinburgh, UK (2011)

2010年
1) Suzuki, M., T. Segawa, T. Namekawa, T. Kurita, Y. Kato, K. Fujii, S. Hori, A. Kaneko, Y. Abe, T. Kitazawa, S. Nakayama, K. Fukui : "Research and development appearance on mass production technology of MOX by microwave heating de-nitration," TM-39468, International Atomic Energy Agency (IAEA) Technical Meeting On Manufacturing Methods for Advanced Nuclear Fuel, May 18-21, Vienna, Austria (2010)
2)  Fukui, K., A. Nagao, M. Katoh, T. Yamamoto and H. Yoshida : "Synthesis of ITO Powder by Microwave Heated Fluidized Bed Reactor," 10063, 13th Asia Pacific Confederation of Chemical Engineering Congress, October 5-8, Taipei, Taiwan (2010)
3)  Fukui, K. : "Fundamental Study on the Microwave Heating Denitration Process for the Production of MOX Fuel,”Core to Core Program, The 36th Seminar of Advanced Particle Handling Science, February 17, Kyoto, Japan (2010)
4)  Fukui, K., T. Yamamoto, H. Yoshida and M. Suzuki : "Mechanism of Microwave Heating Denitration Process for MOX Fuel Production," pp.111, Core to Core 2010 World Network Seminar on Advanced Particle Science and Technology, November 23-26, Kyoto, Japan (2010)
5)  Yamamoto, T., T. Tatekawa, K. Fukui and H. Yoshida : "Classification of nanoparticles using electrical field flow fractionation," pp.38, Core to Core 2010 World Network Seminar on Advanced Particle Science and Technology, November 23-26, Kyoto, Japan (2010)

2009年
1)  Fukui, K., N. Arimitsu, K. Jikihara, T. Yamamoto and H. Yoshida : "Synthesis of Calcium Phosphate Hydrogel from Fly-Ash and Bone-Powder," 2103, 8th World Congress of Chemical Engineering, August 23-27, Montreal, Canada (2009)
2)  Yoshida, H., K. Fukui and T. Yamamoto : "Recent Research of Cut Size Control by Cyclones," pp.20-27, The Fourth Asian Particle Technology Symposium (APT2009), September 14-16, New Delhi, India (2009)

2007年
1) Yoshida, H., K. Fukui, T. Yamamoto, S. Taniguchi and Y. Nishimura : "Effect of Apex Cone and Secondary Flow Injection on Classification Performance of Dry-Cyclone," B21, The Asian Particle Technology Symposium, September 3-5, Beijing, China (2007)
2)  Fukui, K., K. Kanayama, T. Yamamoto and H. Yoshida : "Effects of Microwave Irradiation on the Crystalline Phase of Zeolite Synthesized from Fly Ash by Hydrothermal Treatment," P12, The Asian Particle Technology Symposium, September 3-5, Beijing, China (2007)

2006年
1)  Fukui, K., K. Arai, K. Kanayama and H. Yoshida : "Phillipsite Synthesis from Fly Ash Prepared by Hydrothermal Treatment with Microwave Heating," 84-c, 5th World Congress on Particle Technology 2006, April 23-27, Orlando, USA (2006)
2)  Yoshida, H., K. Ono and K. Fukui : "Fine particle classification with revised cyclone," 239-a, 5th World Congress on Particle Technology 2006, April 23-27, Orlando, USA (2006)

2005年以前・・・Under Construction


Translated Paper
1)  Fukui, K., H. Masuda, K. Nakao, M. Suzuki, K. Baba and K. Hashimoto : "Effect of Particle Properties on the Morphological Change Induced by Impaction against a Solid Surface for Tristearin Powder Mixed with Hard Particles," Advanced Powder Technology, 10(3), 295-313 (1999)
2)  Yoshida, H., K. Fukui and H. Morizaki : "Particle Classification of Fly Ash Using a Modified Louver-type Separator and Reduction of Unburned Carbon Amount," KONA (Powder and Particle), 18, 221-229 (2000)
3)  Fukui, K., H. Yoshida, H. Sakaguchi and M. Arita : "Zeolite Synthesis from Coal Fly Ash Prepared by Hydrothermal Treatment Method and Effect of Particle Size on Its Reaction Mechanism," KONA(Powder and Particle), 19, 232-239 (2001)
4)  Fukui, K., T. Nishimoto, M. Takuguchi and H. Yoshida : "Effect of NaOH Concentration on Zeolite Synthesis from Fly-ash with a Hydrothermal Treatment" KONA(Powder and Particle), 24, 183-191 (2006)
5)  Yoshida, H., K. Fukui, T. Yamamoto, A. Hashida and N. Michitani : "Continuous fine particle classification by water elutriator with applied electo-potential," Advanced Powder Technology, 20(4), 398-405 (2009)

Review Articles
1) 福井国博 : "粉体プロセスにおける微粒子の性状変化に関する研究," 粉体工学会誌, 35(8), 603-605 (1998)
2) 福井国博 : "液相沈降法による粒度分布測定におけるデータ処理法," M&E, 11, 90-96 (1999)
3) 福井国博 : "ゼオライト化による焼却灰の循環再利用," 実用産業情報, 36-43 (2005)
4) 福井国博 : "マイクロ波加熱水熱処理を利用したフライアッシュからのゼオライト合成," 粉体工学会誌, 43(10), 755-760 (2006)
5) 福井国博 : "マイクロ波加熱を利用した水熱処理によるフライアッシュからのゼオライト合成," 実用産業情報, 9-13 (2007)
6) 福井国博:"焼却飛灰・家畜骨粉の高プロトン電導性材料への再資源化とその利用," 化学工業, 59(7), 569-573 (2008)
7) 福井国博, 山本徹也, 吉田英人 : "制御流同伴型サイクロンの分離性能," 工業加熱, 48(5), 37-41 (2011)
8)
 福井国博 : "マイクロ波加熱による固相反応を利用した機能性材料粒子の作製とその効率化," ファインケミカル, 42(12), 17-23 (2013)
9) 福井国博 : "マイクロ波加熱と粉体プロセスを併用した機能性粒子の合成作製," ケミカルエンジニヤリング, 60(1), 51-57 (2015)


Books
1) 「粉砕・分級と表面改質」 pp.473-478, 分担執筆, NGT社 (2001)
2) 「粉体・微粒子のサイズリダクション(粉砕・分級)技術-最適化と操作ノウハウ」pp.315-327, 分担執筆, サイエンス&テクノロジー (2012)
3) 「はじめての集じん技術」pp.53-61, 分担執筆, 日刊工業新聞社(2013)
4) 「粉・粒体の構造制御, 表面処理とプロセス設計」pp.106-110, 分担執筆, 技術情報協会(2013)

Patents
1) 「一般焼却灰を原料とするプロトン伝導性材料及びその製造方法」, 特願2006-185160、特開2008-016273
2) 「金属酸化物粒子の製造方法」, 特願2009-39447、特開2010-195605
3) 「ハイブリッド加熱法による金属酸化物粒子の製造方法」, 特願2009-241776、特開2011-088766
4) 「製品添加によるマイクロ波吸収・発熱効果を利用した金属酸化物粒子の製造方法」, 特願2009-241778、特開2011-088767
5) 「固相反応による粉体の製造方法」, 特願2010-120401、特開2011-246305
6) 「金属酸化物粒子の製造方法」, 特願2011-230269
7) 「金属酸化物粒子の製造方法」, 特願2011-269609
8) 「キュポラ設備における亜鉛及びコークスの回収方法」, 特願2013-045082

2005年以前出願・・・Under Construction