原著論文

2017年

Fukasawa, T., A.D. Karisma, D. Shibata, A.-N. Huang, K. Fukui : "Synthesis of zeolite from coal fly ash by microwave hydrothermal treatment with pulverization process" Advanced Powder Technology, 28(3), 798-804 (2017)

Huang, A.-N., N. Maeda, D. Shibata, T. Fukasawa, H. Yoshida, H.-P. Kuo, K. Fukui : "Influence of a laminarizer at the inlet on the classification performance of a cyclone separator" Separation and Purification Technology, 174, 408-416 (2017)

Maeda, N., T. Katakura, T. Fukasawa, A.-N. Huang, T. Kawano, K. Fukui : "Morphology of woody biomass combustion ash and enrichment of potassium components by particle size classification" Fuel Processing Technology, 156, 1-8 (2017)

Karisma, A.D., T. Hamaba, T. Fukasawa, A.-N. Huang, T. Segawa, K. Fukui : "Validation of measured microwave absorption and temperature change for development of a single-mode-type microwave heating thermogravimetry apparatus" Review of Scientific Instruments, 88, 024101 (2017)

Shirasawa, N., M. Matsuzawa, T. Fukazawa, K. Fukui, H. Yoshida : "Fine particle classification by a vertical type electrical water-sieve with various particle dispersion methods" Separation and Purification Technology, 175, 107-114 (2017)

深澤智典, 野村啓介, 川幅康平, 大西洋, 畝一希, 福井国博, 吉田英人 : "逆電気泳動法と直交電気泳動法によるサブミクロンシリカ粒子の湿式分級" 粉体工学会誌, 54(1), 17-22 (2017)

2016年

Segawa, T., T. Fukasawa, A.-N. Huang, Y. Yamada, M. Suzuki, K. Fukui : "Influence of the heating method on the particle characteristics of copper oxide powders synthesized from copper nitrate aqueous solutions" Chemical Engineering Science, 153, 108-116 (2016)

Fukasawa, T., S. Sunada, D. Shibata, H. Yoshida, K. Fukui : "Effects of Sintered-Metal Cone Length on Gas-Cyclone Classification Performance" Chemical Engineering & Technology, 39(3), 484-490 (2016)

2015年

Segawa, T., K. Kawaguchi, K. Ishii, M. Suzuki, N. Arimitsu, H. Yoshida, K. Fukui : Nickel oxide powder synthesis from aqueous solution of nickel nitrate hexahydrate by a microwave denitration method, Advanced Powder Technology, 26, 983-990 (2015)

東野元春,前田剛志,福井国博,吉田英人 : 数値シミュレーションによるルーバ型分級機の高性能化に関する検討,粉体工学会誌, 52(5), 252-259 (2015)

Nakatuka, Y., H. Yoshida, K. Fukui : The effect of particle size distribution on effective zeta-potential by use of the sedimentation method, Advanced Powder Technology, 26, 650-656 (2015)

Wakizono, Y., T. Maeda, K. Fukui, H. Yoshida : Effect of ring shape attached on upper outlet pipe on fine particle classification of gas-cyclone, Separation and Purification Technology, 141, 84-93 (2015)

 

2014年

Yoshida, H., T. Yamamoto, Y. Mori, H. Masuda, K. Okazaki, H. Sugasawa : Particle size measurement of reference particle candidates and uncertainty region of count and mass based cumulative distribution, Advanced Powder Technology, 25, 1748-1753 (2014)

Igushi, T., H. Yoshida : Influence of the Number of Detectors for Laser Diffraction Scattering Method: Bimodal Distributions, Particulate Science and Technology, 32, 298-305 (2014) 

Yoshida, H., H. Sugasawa, K. Fukui, T. Yamamoto, H. Masuda : Theoretical calculation of uncertainty region for spherical particles based on a picket fence, quasi-monodisperse particles, Advanced Powder Technology, 25, 524-529 (2014)

竹田尚広,忍足輝男,山本徹也,福井国博,吉田英人 : 乾式サイクロンの入口清浄空気および案内羽根が粒子分級性能に与える影響, 粉体工学会誌, 51(9), 614-622 (2014)  

松澤光晴,高井健次,坂本祐太郎,村上公威,福井国博,山本徹也,吉田英人 : 電場印加型の垂直流型水篩による微粒子の高精度分級, 粉体工学会誌, 51(2), 68-76 (2014)

吉田英人 : 新型の上下流型水篩装置による微粒子の高精度分級, 化学装置, 56(2), 21-25 (2014)

 

2013年

Hiraiwa, Y., T. Oshitari, K. Fukui, T. Yamamoto, H. Yoshida : Effect of free air inflow method on fine particle classification of gas-cyclone, Separation and Purification Technology, 118, 670-679 (2013)

Fukui, K., M. Katoh, Y. Saeki, T. Yamamoto, H. Yoshida : Effect of packing fraction on indium tin oxide powder synthesis via a solid-phase reaction with microwave heating, Chemical Engineering Science, 98, 17-24 (2013)

Yoshida, H., T. Tatekawa, K. Fukui, T. Yamamoto : A new method of zeta-potential measurement by use of the sedimentation balance method, Powder Technology, 237, 303-308 (2013)

Hwang, K. J., Y. W. Hwang, H. Yoshida : Design of novel hydrocyclone for improving fine particle separation using computational fluid dynamics , Chemical Engineering Science, 85, 62-68 (2013)

Yoshida, H. : Effect of apex cone shape and local fluid flow control method on fine particle classification of gas-cyclone, Chemical Engineering Science, 85, 55-61 (2013)

 

2012年

Yoshida, H., Y. Hayase, K. Fukui, and T. Yamamoto : Effect of conical length on separation performance of sub-micron particles by electrical hydro-cyclone, Powder Technology, 219, 29-36 (2012)

Yoshida, H., T. Yamamoto, K. Fukui, and H. Masuda : Theoretical calculation of uncertainty region based on the general size distribution in the preparation of standard reference particles for particle size measurement, Advanced Powder Technology, 23, 185-190 (2012)

Hwang, K. J., Y. W. Hwang, H. Yoshida, and K. Shigemori : Improvement of particle separation efficiency by installing conical top-plate in hydro-cyclone, Powder Technology, 232, 41-48 (2012)

Igushi, T., and H. Yoshida : The effect of initial parameters on particle size distribution inverted using the laser diffraction technique and a non-linear iterative method, Advanced Powder Technology, 23, 682-692 (2012)

Igushi, T., and H. Yoshida : Influence of the number of detectors by laser scattering method for estimation of particle size, Review of Scientific Instruments, 5, 055103 (2012)

 

2011年

Yoshida H., T. Igushi, T. Yamamoto and H. Masuda : Theoretical calculation of fundamental uncertainty region based on the maximum and/or the minimum size in the preparation of standard reference particles for particle size measurement, Advanced Powder Technology, 22, 43-49 (2011)

Romanus, K., S. Izumi, H. Yoshida, K. Fukui, and T. Yamamoto : Separation of Unburned Carbon in Fly Ash Particles Using Special Louver Separator, Journal of Chemical Engineering of Japan, 44, 146-154 (2011)

Yamamoto, T., T. Shinya, K. Fukui, and H. Yoshida : Classification of Particles by Centrifugal Separator and Analysis of the Fluid Behavior, Advanced Powder Technology, 22, 294-299 (2011)

Yamamoto, T., T. Tatekawa, K. Fukui and H. Yoshida : Enhancement of the Classification Performance of Electrical Field-Flow Fractionation Using Horizontal Electrophoresis, Journal of Chemical Engineering of Japan, 44, 398-404 (2011)

Yamamoto, T., Y. Harada, T. Tsuyama, K. Fukui and H. Yoshida : Classification of Particles Dispersed by Bead Milling with Electrophoresis, KONA, 29, 125-133 (2011)

Fukui K., H. Yoshida, K. Jikihara and T. Yamamoto : Effects of clean-air injection on particle-separation performance of novel cyclone with sintered metal cone, Separation and Purification Technology, 80, 356-363 (2011)

重森一葉,山本徹也,福井国博,吉田英人 : 局所的な静電場印加および流動制御を利用した液体サイクロンの高性能化, 粉体工学会誌, 48(8), 526-533 (2011)

竹田尚広,西村洋佑,小澤和三,山本徹也,福井国博,吉田英人 : 改良型の乾式サイクロンによる粒子分離性能の向上, 粉体工学会誌, 48(12), 840-846 (2011)

 

2010

Yamamoto, T., Y. Harada, K. Fukui, and H. Yoshida : AFM investigation of the surface properties of silica particles dispersed by bead milling, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 362, 97-101 (2010)

Romanus, K., H. Yoshida, K. Fukui, and T. Yamamoto : Influence of inlet flow rate, pH, and beads mill operating condition on separation performance of sub-micron particles by electrical hydrocyclone, Advanced Powder Technology, 21, 246-255 (2010)

Yoshida, H., Y. Nishimura, K. Fukui, and T. Yamamoto : Effect of apex cone shape on fine particle classification of gas-cyclone, Powder Technology, 204, 54-62 (2010)

 

 

解説

 

1) 吉田英人 : "乾式サイクロンの捕集箱に設置した円錐体の効果," 粉体技術, 3(9), 17-23 (2011)
2) 山本徹也 : "遠心場・電場を利用したナノ粒子分級装置の開発," 粉体技術, 3(9), 24-30 (2011)
3) 福井国博,吉田英人,山本徹也 : "制御流同伴型サイクロンの分離性能," 工業加熱, 48(5), 37-41 (2011)
4) 山本徹也 : "粒子表面物性を利用した微粒子分級システムの開発," 粉体工学会誌, 49(11), 832-836 (2012)

 

 

著書

 

1)「粉体工学ハンドブック」, Marcel Dekker Inc. (1998)
2)「改訂化学工学プログラミング演習」, 培風館(2000)
3)「粉砕・分級と表面改質」, NGT(2001)
4)「微粒子工学大系」, フジテクノシステム(株)(2001)
5)「エアロゾル用語集」, 京都大学学術出版会(2004)
6)「化学装置」, 化学工業社(2014)