List of Publications (Hideto YOSHIDA)

原著論文
1)"Effect of Probe Diameter on Isokinetic Sampling Error," Journal of Chemical Engineering of Japan, 11, 48-52 (1978)
2)"Measurement and Correlation of the Thermal Conductivites for Several Dense Fluids ," Journal of Chemical Engineering of Japan, 17, 237-245 (1984)
3)"異種物質から構成された表面へのエアロゾル粒子の沈着," 化学工学論文集, 14, 655-662 (1988)
4)"Size Clasification of Submicron Powder by Air Cyclone and Three-dimensional Analysis," Journal of Chemical Engineering of Japan, 24, 640-647 (1991)
5)"改良型サイクロンによる微粒子の分級," 化学工学論文集, 19, 476-482 (1993)
6)"改良型サイクロンによるフライアッシュ微粒子の高精度分級," 化学工学論文集, 20, 105-112 (1994)
7)"サイクロンのブローダウンによる流動及び微粒子運動への影響," 化学工学論文集, 21, 594-602 (1995)
8)"固・気２相流中の粉塵濃度測定及び対数正規分布による粒度推定法 ," 化学工学論文集, 23, 350-355 (1996)
9)"サイクロン内の3次元シミュレーション（直接法による検討） ," 化学工学論文集, 24, 885-891 (1997)
10)"粒子充填層の分離性能に及ぼす粒子充填構造の影響 ," 化学工学論文集, 24, 37-41 (1998)
11)"沈降天秤法による粒度分布測定におけるデータ処理 ," 化学工学論文集, 24, 928-933 (1998)
12)"水熱法によるフライアッシュからのゼオライト合成とその反応機構に及ぼす原料粒径の影響 ," 化学工学論文集, 25, 987-992 (1999)
13)"閉回路粉砕ー分級プロセスの始動時動特性解析及び最適操作 ," 化学工学論文集, 26, 654-660 (2000)
14)"乾式サイクロンによる高精度分離径制御 ," 化学工学論文集, 27, 574-580 (2001)
15)"Classification and Collection of Fine Particles by Means of Backward Sampling ," Powder Technology, 118, 45-52 (2001)
16)"閉回路粉砕・分級プロセスの安定化条件に関する検討 ," 化学工学論文集, 28, 36-42 (2002)
17)"粒子・流体挙動が沈降天秤法による粒度分布測定に与える影響 ," 化学工学論文集, 28, 161-167 (2002)
18)"水熱法によるフライアッシュからのゼオライト合成に及ぼす原料組成の影響 ," 化学工学論文集, 28, 155-160 (2002)
19)"閉回路粉砕・分級プロセスにおける製品粒度分布の制御 ," 化学工学論文集, 29, 272-277 (2003)
20)"回転場を利用した粉砕機の性能に及ぼす羽根形状の影響 ," 化学工学論文集, 29, 607-613 (2003)
21)"回転場を利用した粉砕機の羽根傾斜が粉砕粒子へ及ぼす影響 ," 化学工学論文集, 30, 108-111 (2004)
22)"表面活性剤の利用によるサイクロンスクラバ−の性能向上 ," 化学工学論文集, 30, 640-646 (2004)
23)"Effect on Initial Slurry Concentration Distribution on the Particle Size Distribution Measured with Sedimentation Balance Method ," Advanced Powder Technology , 15, 181-200 (2004)
24)"Effect of Blade Angle on Crystallinity in a Mechanical Impact Mill ," Journal of Chemical Engineering of Japan, 37, 1207-1214 (2004)
25)"Effect of Inlet Shape and Slurry Temperature on the Classification Performance of Hydro-cyclones ," Powdet Technology, 140, 1-9 (2004)
26)　Yoshida, H., S. Yoshikawa, K. Fukui, and T. Yamamoto : "Effect of multi-inlet flow on particle classification performance of hydro-cyclones," Powder Technology, 184, 352-360 (2008)
27)　福井国博, 木戸口聡，有満直樹，山本徹也, 吉田英人 : "一般廃棄物焼却飛灰のリン酸カルシウムハイドロゲルへの再資源化," 化学工学論文集, 34(2), 304-308 (2008)
28)　Yoshikawa, S., K. Romanus, K. Fukui, T. Yamamoto and H. Yoshida : "Effect of Multi-Inlet Flow on Particle Classification Performance of Hydro-Cyclones and New Estimating Equation," Journal of Chemical Engineering of Japan, 41, 756-765 (2008)
29)　Yoshida, H., Y. Mori, H. Masuda, and T. Yamamoto : "Particle size measurement of standard reference particle candidates and theoretical estimation of uncertainty region," Advanced Powder Technology, 20, 145-149 (2009)
30)　Yoshida, H., Y. Inada, K. Fukui, and T. Yamamoto : "Improvement of gas-cyclone performance by use of local fluid flow control method," Powder Technology, 193, 6-14 (2009)
31)　Fukui, K., M. Katoh, T. Yamamoto and H. Yoshida : "Utilization of NaCl for phillipsite synthesis from ash by hydrothermal treatment with microwave heating," Advanced Powder Technology, 20, 35-40 (2009)
32)　Fukui, K., N. Arimitsu, S. Kidoguchi, T. Yamamoto and H. Yoshida : "Synthesis of calcium phosphate hydrogel from waste incineration fly ash and bone powder," Journal of Hazardous Materials, 163, 391-395 (2009)
33)　Fukui, K., N. Arimitsu, K. Jikihara, T. Yamamoto and H. Yoshida : "Performance of fuel cell using calcium phosphate hydrogel membrane prepared from waste incineration fly ash and chicken bone powder," Journal of Hazardous Materials, 168, 1617-1621 (2009)
34)　Yoshida, H., K. Fukui, T. Yamamoto, A. Hashida and N. Michitani : "Continuous fine particle classification by water elutriator with applied electro-potential," Advanced Powder Technology, 20, 398-405 (2009)
35)　金子幸生，山本徹也，福井国博，吉田英人 : "改良型の軸流サイクロンを用いた集塵および脱硫性能の検討," 粉体工学会誌, 46(9), 681-687 (2009)
36)　Yamamoto, T., Y. Harada, K. Fukui and H. Yoshida : "Classification of Particles Dispersed by Bead Milling using Electrical Field-Flow Fractionation," Journal of Chemical Engineering of Japan,42, 720-727 (2009)
37)　Fukui, K., K. Kanayama, M. Katoh, T. Yamamoto and H. Yoshida : "Synthesis of indium tin oxid powder by solid-phase reaction with microwave heating," Advanced Powder Technology, 20, 488-492 (2009)
38)　Yamamoto, T., Y. Harada, K. Fukui, and H. Yoshida : "AFM investigation of the surface properties of silica particles dispersed by bead milling," Colloids and Surfaces A: Physicochemical and Engineering Aspects, 362, 97-101 (2010)
39)　Romanus, K., H. Yoshida, K. Fukui, and T. Yamamoto : "Influence of inlet flow rate, pH, and beads mill operating condition on separation performance of sub-micron particles by electrical hydrocyclone," Advanced Powder Technology, 21, 246-255 (2010)
40)　Yoshida, H., Y. Nishimura, K. Fukui, and T. Yamamoto : "Effect of apex cone shape on fine particle classification of gas-cyclone," Powder Technology, 204, 54-62 (2010)
41)　Yoshida, H., T. Igushi, T. Yamamoto, and H. Masuda : "Theoretical calculation of fundamental uncertainty region based on the maximum and/or the minimum size in the preparation of standard reference particles for particle size measurement," Advanced Powder Technology, 22, 43-49 (2011)
42)　Romanus, K., S. Izumi, H. Yoshida, K. Fukui, and T. Yamamoto : "Separation of Unburned Carbon in Fly Ash Particles Using Special Louver Separator," Journal of Chemical Engineering of Japan, 44, 146-154 (2011)
43)　Yamamoto, T., T. Shinya, K. Fukui, and H. Yoshida : "Classification of Particles by Centrifugal Separator and Analysis of the Fluid Behavior," Advanced Powder Technology, 22, 294-299 (2011)
44)　Yamamoto, T., T. Tatekawa, K. Fukui and H. Yoshida : "Enhancement of the Classification Performance of Electrical Field-Flow Fractionation Using Horizontal Electrophoresis," Journal of Chemical Engineering of Japan, 44, 398-404 (2011)
45)　Fukui K., H. Yoshida, K. Jikihara and T. Yamamoto : "Effects of clean-air injection on particle-separation performance of novel cyclone with sintered metal cone," Separation and Purification Technology, 80, 356-363 (2011)
46)　重森一葉，山本徹也，福井国博，吉田英人 : "局所的な静電場印加および流動制御を利用した液体サイクロンの高性能化," 粉体工学会誌, 48(8), 526-533 (2011)
47)　重森一葉，山本徹也，福井国博，吉田英人 : "局所的な静電場印加および流動制御を利用した液体サイクロンの高性能化," 粉体工学会誌, 48(8), 526-533 (2011)
48)　Fukui K., H. Yoshida, K. Jikihara and T. Yamamoto : "Effects of clean-air injection on particle-separation performance of novel cyclone with sintered metal cone," Separation and Purification Technology, 80, 356-363 (2011)
49)　竹田尚広，西村洋佑，小澤和三，山本徹也，福井国博，吉田英人 : "改良型の乾式サイクロンによる粒子分離性能の向上," 粉体工学会誌, 48(12), 840-846 (2011)
50)　Yamamoto, T., Y. Harada, T. Tsuyama, K. Fukui and H. Yoshida : "Classification of Particles Dispersed by Bead Milling with Electrophoresis," KONA, 29, 125-133 (2012)
51)　Yoshida, H., Y. Hayase, K. Fukui, and T. Yamamoto : "Effect of conical length on separation performance of sub-micron particles by electrical hydro-cyclone," Powder Technology, 219, 29-36 (2012)
52)　Yoshida, H., T. Yamamoto, K. Fukui, and H. Masuda : "Theoretical calculation of uncertainty region based on the general size distribution in the preparation of standard reference particles for particle size measurement," Advanced Powder Technology, accepted


国際会議論文
1)"Dust Sampling for Particle Mass Concentration Measurement," U.S-Japan Seminar on Particle Technology, November 27-36 (1980)
2)"Deposition of Aerosol Particles on a Surface Composed of Different Kinds of Materials," Third International Aerosol Conference, July 387-390 (1990)
3)"Measurement of Contact Potential Difference between Powder Bed and Metal," 2nd World Congress of Particle Tech., July 281-288 (1990)
4)"Three Dimensional Analysis of Air Cyclone and Particle Separation by Revised Type Cyclone," The 5th Korea-Japan Powder Technology Joint Seminar, August 74-79 (1993)
5)"Three dimensional Analysis of Air Cyclone and Particle Separation by Revised Cyclone," 6th International Symposium on Agglomeration, November 715-720 (1993)


著書
1)「エアロゾル用語集」, 京都大学学術出版会(2004)
2)「微粒子工学大系」, フジテクノシステム（株）(2001)
3)「粉砕・分級と表面改質」, NGT(2001)
4)「改訂化学工学プログラミング演習」, 培風館(2000)
5)「粉体工学ハンドブック」, Marcel Dekker Inc. (1998)


特許
1)「サイクロン装置」, 特開1994−238197
2)「粉体粒子の粒度分布を得るための方法」, 特開1998−267825
3)「液体サイクロン及び液体サイクロンを用いた分離方法」, 特開1999−128159
4)「サイクロン式の乾式分級装置」, 特開1992−349949
5)「気流中の粒子の分級を利用した濃度と粒径分布の測定方法」, 特開1994−190226
Particle Technology Laboratory, Department of Chemical Engineering
Graduate School of Engineering, Hiroshima University