累計カウント : 昨日カウント :
本日カウント :
広島大学大学院 先進理工系科学研究科
機械工学プログラム,機械加工システム研究室
田中 隆太郎,特定教授
TANAKA Ryutaro, Professor (Special Recognition)
広島大学研究者総覧 Hiroshima University Profiles of Faculty and Research Scholars
Researcher ID: D-8435-2012
Scopus Author ID: 57216761101
学 歴
広島大学工学部 第1類(機械系)卒業(1998.3)
広島大学大学院 工学研究科 設計工学専攻 博士課程前期修了 (2000.3)
広島大学大学院 工学研究科 設計工学専攻 博士課程後期修了 (2003.3)
Education
Faculty of Engineering, Hiroshima University
(1998)
Master's course of Graduate School of
Engineering, Hiroshima University (2000.3)
Doctoral course of Graduate School of
Engineering, Hiroshima University (2003.3)
学位 Degree
博士(工学) 広島大学 Doctor of Engineering (Hiroshima
University)
職 歴
金沢大学 工学部 機能機械工学科 助手(2003.4〜2007.3)
金沢大学大学院 自然科学研究科 機能機械科学専攻 助教 (2007.4〜2009.3)
金沢大学 理工研究域 機械工学系 講師 (2009.4〜2012.3)
広島大学大学院 工学研究科 機械システム工学専攻 准教授 (2012.4〜2020.3)
広島大学大学院 先進理工系科学研究科 機械工学プログラム 准教授 (2020.4〜現在)
Work Experience
Assistant
Professor-Lecturer, Kanazawa University (2003.4-2012.3)
Associate Professor,
Graduate School of Advanced Science and Technology, Hiroshima University
(2012.4 - present)
Professor (Special
Recognition), Hiroshima University (2022.6.28)
E-mail: ryu-tanaka@@@hiroshima-u.ac.jp
※@の部分を適正な形式(フォント,数)に変更ください.
専門分野
機械工作・生産工学・マシニングテクノロジー
Subject or specialist field
Machining
Technology, Manufacturing Engineering, Production Engineering
主な研究課題 Main research subjects
切削加工のメカニズムに関する研究に取り組んでいます.
快削鋼から超耐熱合金に代表される難削材までさまざまな素材を対象として,
各種切削工具の切削性能評価・工具摩耗メカニズムの解明を目的に研究を行っています.
これまでの主な取り組みを以下に示します.※詳細についてはお問い合わせください.
・
工具輪郭曲線を用いた逃げ面摩耗分布,仕上げ面粗さの解析(Research
paper 97, 98)
Analysis of flank wear distribution and
surface roughness using tool contour
・
切削仕上げ面の新しい評価方法
Newly Evaluation Method
for Finished Surface
刃先の輪郭形状の転写性の定量的評価
Quantitative Evaluation for Transferability
of Cutting Edge Contours on Work material (Research Paper75)
・
送り停止後のゼロ切削における切削抵抗を用いた切削油剤の潤滑性評価 (Research
paper 96)
・
マイクロフィードエンドミル加工における切削抵抗を用いた切削油剤の潤滑性評価 (Research
paper 89, Proc. 44)
Performance Evaluation Method for Cutting
Fluids using Cutting Forces in Zero-cutting after Completely Stop of Feed
Motion
Performance
Evaluation Method for Cutting Fluids using Cutting Force in Micro-Feed End
Milling
Friction
Coefficient of Cutting Fluids /Cutting Oils /Coated Tools
・
ミクロンオーダーの送りが工具摩耗へおよぼす影響 (Research
paper 90)
Influence of Micro Order Feed Rate on Tool
Wear
・
難削材料の高速・高能率切削 High Speed/High
Efficient Machining of Difficult-to-cut Materials
電着ダイヤモンドドリルのCFRPの穴加工における切削性能
Cutting characteristic of Electrodeposited
Diamond Drill in drilling of CFRP Plate
(Research Paper 69, 78)
焼入鋼旋削における工具刃先温度と白層厚さの関係
Relation between Cutting Temperature and White Layer
Thickness in Turning of Hardened steel (Research Paper 19, 55)
焼結鋼旋削における工具刃先温度と仕上げ面粗さの関係
Relation between Cutting Temperature and Surface Roughness in
Turning of Sintered steel (Research Paper 53)
・
切削状態の評価に関する研究 Evaluation of Cutting State
切削抵抗動的成分を用いた評価法の各種加工法への適用
Evaluating Method for Cutting State using Dynamic Components
of Cutting Force
・
切削温度の測定法に関する研究 Measurement of
Cutting Temperature
切削温度へおよぼす切削油剤の影響
Influence of Cutting Fluid on Cutting Temperature
光ファイバ2色温度計を用いた湿式加工における工具刃先温度測定法の構築
Establishment of Measuring method of Cutting Temperature in
Wet Cutting using a Two-color Pyrometer (Research Paper 46)
チタン合金のウェットミーリングにおける工具刃先の過渡的温度測定
Transitional cutting temperature in end milling of titanium
alloy under wet condition (Research Paper 68)
タップ加工時の工具刃先温度測定 Cutting Temperature in Tapping (Research Paper 54)
・
快削鋼の切削機構に関する研究 Cutting
Mechanism of Free-Cutting/ Free-Machining Steels (Research Paper 9, 24, 57)
快削鋼の高能率加工(加工メカニズムの解明,最適工具材種の評価,雰囲気制御,微量通電切削・・・)
・
レーザによる改質層の機械加工に関する研究 Machining of Laser Heat Treated Materials (Research Paper 18, 20, 21, 33, 40, 41)
レーザ熱処理された被削材の加工特性(切りくず折断,バリの発生抑制,微小表面うねり生成・・・)
博士学位取得者の研究テーマTitles of doctoral theses
・
Wear mechanism on coated carbide
tools in the machining of ductile cast iron
(ダクタイル鋳鉄の機械加工における被覆工具の摩耗メカニズム) 2017年3月修了
・
難削材料の穴加工における切りくず排出に関する研究
(Study on
Chip Evacuation in Hole Machining of Difficult-to-Cut Materials) 2018年3月修了
・
マイクロフィードエンドミル加工における切削抵抗を用いた切削油剤の潤滑性評価法
(Performance
Evaluation Method for Cutting Fluids using Cutting Force in Micro-Feed End
Milling)
2020年3月修了
※ 在学生で研究内容に興味がある方は,いつでも来室してください.
大学院博士課程における学生の受け入れ歓迎します.入学を検討されている方は事前にご相談ください.
Dr.をお考えの方へ 社会人Drをお考えの方へ ※広島大学大学院先進理工系科学研究科研究奨学金制度があります.
Please
let me know if you know anyone who would take a doctoral degree in our doctoral course.
また,共同研究・技術相談についても随時受け入れています.ご一報の程お願い致します.
指導学生の表彰
2023年度精密工学会中国四国支部・九州支部共催広島地方講演会優秀発表賞・同マツダ賞,2021年度精密工学会中国四国支部・九州支部共催岡山地方講演会優秀講演賞,日本機械学会三浦賞(2009年度,2019年度),2016年度マザック高度生産システム研究論文賞2017年度精密工学会中国四国支部学術講演会優秀講演賞,2019年度精密工学会九州支部・中国四国支部学術講演会ベストプレゼンテーション賞,Best presentation award of the International
Conference on Machining, Materials and Mechanical Technologies 2018など
学会・社会的活動
(任期中)
・
精密工学会難削材加工専門委員会委員(2003.4〜) 事務局(2015.4〜)
・
精密工学会中国四国支部・庶務幹事(2017.4~)
・
精密工学会切削加工専門委員会委員(2013.4〜)
・
砥粒加工学会会誌編集委員会委員(2015.4〜)
・
日本機械学会RC279「スマートファクトリーにおける生産技術に関する研究分科会」研究協力委員(2018.4〜)
・
精密工学会広報情報部会・広報委員(2020.4〜)
(任期終了)
・
精密工学会中国四国支部商議員(2013.4~2015.3) 幹事(2015.4~2016.3) 会計幹事(2016.4~2018.3)
・
精密工学会北陸信越支部・商議員(2010.4〜2012.3)
・
精密工学会広報情報部会・広報委員(2010.4〜2014.3)
・
2014年度精密工学会学術講演会秋季大会実行委員
・
2011年度精密工学会学術講演会秋季大会実行委員
・
精密工学会北陸信越支部・会計幹事(2010.4〜2011.3)
・
精密工学会北陸信越支部・活性化委員(2005.2〜2009.3)
・
精密工学会次世代快削鋼基盤技術研究会委員(2003.12〜2008.11)
・
砥粒加工学会挑戦的砥粒加工技術専門委員会運営委員(2005.8〜2007.3)
・
2007年度精密工学会北陸信越支部学術講演会実行委員(2007.11)
・
The 6th
International Conference on Leading Edge Manufacturing in 21st Century,
Organizing Committee (2011.11)
・
The 7th
International Conference on Leading Edge Manufacturing in 21st Century,
Organizing Committee (2013.11)
・
The 8th
International Conference on Leading Edge Manufacturing in 21st Century,
Organizing Committee (2015.10)
・
The 10th
International Conference on Progress of Machining Technology, Organizing
Committee (2012.9)
・
The International
Conference on Machining, Materials and Mechanical Technologies 2014,Technical and Organizing Committee (2014.8)
・
The International
Conference on Machining, Materials and Mechanical Technologies 2016,Conference Secretariat (2016.10)
・
The 9th International Conference on. Leading
Edge Manufacturing in 21st Century (LEM21). November 13-17, 2017,Conference Secretariat
・
The
10th International Conference on. Leading Edge Manufacturing in 21st Century
(LEM21). November 14-18, 2021,Organizer (OS05: Cutting technology)
・
精密工学会会誌編集委員会委員(2018.4〜)
・
日本機械学会98期生産加工工作機械部門運営委員会幹事(2020.4〜2021.3)
・
日本機械学会99期生産加工工作機械部門運営委員会・第1企画委員会委員長(2021.3〜2022.3)
・
日本機械学会98・99期生産加工・工作機械部門・代議員(2020.4〜2022.3)
受 賞
1.
Best Presentation Award 2006 presented at the 8th International Conference on Progress of Machining
Technology, November 11, 2006 Matsue Japan (2006.11.11)
2.
精密工学会北陸信越支部奨励賞 (2007.3.21)
3.
The Best Paper
Award presented at the 4th International Conference on Leading Edge
Manufacturing in 21st Century (2007.11.8)
4.
精密工学会アフィリエイト(2009.3.11)
5.
平成21年度マザック高度生産システム研究論文賞(2010.5.28)
6.
第33次工作機械技術振興賞・奨励賞(2012.6.12)
7.
精密工学会中国四国支部優秀研究者賞(2017.3.30)
研究業績 Research Achievements
学術論文 ※詳細についてはお問い合わせください.Research papers If you have any questions,
please feel free to contact us.
1)
山根八洲男,田中隆太郎,鳴瀧 則彦:
“BN添加鋼の被削性”,精密工学会誌,Vol.64 [9] (1998) pp.1370-1374.
2)
山根八洲男,田中隆太郎,関谷 克彦,鳴瀧 則彦,白神 哲夫:
“BN添加鋼の被削性 (第2報) −快削効果に及ぼす被削材および工具中の化学成分−”,精密工学会誌,Vol.66 [2] (2000)
pp.229-233.
3) 田中隆太郎,山根八洲男,関谷 克彦,鳴瀧 則彦,白神 哲夫:
“BN添加鋼の被削性 (第3報) −断続切削における被削性−”,精密工学会誌,Vol.68 [5] (2002) pp.705-709.
4) 上田 隆司,山田 啓司,篠崎 道,堀居 直幸,細川 晃,田中隆太郎:
“レーザー歯科治療における加工音測定による除去量モニタリング”,日本レーザー歯学会誌,Vol.15 [2] (2004) pp.61-66.
5) 山田 啓司,森田 精一,上田 隆司,細川 晃,田中隆太郎:
“Nd:YAGレーザによるSiウエハの割断加工に関する研究−冷凍チャックシステムによる効果−”,精密工学会誌,Vol.72 [3] (2006) pp.393-397.
6) 田中隆太郎,山根八洲男,関谷 克彦,鳴瀧 則彦,白神 哲夫:
“BN添加鋼の被削性(第4報)−コーテッド超硬工具およびセラミック工具の旋削加工時の工具摩耗特性−”,精密工学会誌,Vol.72 [10] (2006) pp.1227-1231.
7) 細川 晃,岡田 将人,北川 修介,田中隆太郎,上田 隆司:
“CBN工具によるハードミリング−高速エンドミル加工に関する研究(第2報)−”,精密工学会誌,Vol.73 [2] (2007) pp.226-231.
8) 田中隆太郎,上田 隆司,細川 晃,林 勇伝,山田 啓司:
“CO2レーザによる鋼の表面改質層の被削性とその改善”,日本機械学会論文集C編,Vol.73 [727] (2007)
pp.1879-784.
9) R. Tanaka, Y. Yamane, K. Sekiya, N. Narutaki, T. Shiraga:
“Machinability
of BN free-machining steel in turning”, International Journal of Machine Tools and Manufacture,
Vol. 47 (2007) pp.1971-1977.
10) 田中隆太郎,山根八洲男,岡田 将人,細川 晃,上田 隆司:
“高速対応型快削鋼のエンドミル加工−BN添加鋼切削時の工具摩耗と切削温度−”,精密工学会誌,Vol.73 [7] (2007) pp.803-807.
11) 田中隆太郎,林 勇伝,田邉 一真,上田 隆司,細川 晃:
“レーザ熱処理による切りくず処理性の改善に関する基礎的研究”,精密工学会誌,Vol.73 [9] (2007) pp.1025-1029.
12) 田中隆太郎,山根八洲男,上田 隆司,細川 晃,白神 哲夫:
“BN添加鋼の穴加工”,砥粒加工学会誌,Vol.52 [1] (2008) pp.28-33.
13) 山田 啓司,上田 隆司,堀居 直幸,細川 晃,田中隆太郎:
“YAGレーザによる歯科治療に関する研究 (第3報)−窩洞形成における水の影響−”,精密工学会誌,Vol.74 [2] (2008) pp.150-154.
14) 細川 晃,小澤 匡史,田中隆太郎,古本 達明,上田 隆司:
“旋削加工におけるMQLの効果−ファイバ連結型2色温度計を用いた工具刃先温度の測定−”,精密工学会誌,Vol.74 [10] (2008) pp.1080-1084.
15) A. Yassin, T. Ueda, A. Hosokawa, T. Furumoto, R. Tanaka and
S. Abe:
“Study on cutting characteristics of sintered material with Yb:
Fiber laser”, Journal of Advanced
Mechanical Design, Systems, and Manufacturing Vol.2, [5] (2008) pp.833-843.
16) 上田 隆司,A. Yassin, 古本 達明,細川 晃,田中隆太郎,阿部 諭:
“金属粉末光造形複合加工における小径ボールエンドミルの切削性能”,砥粒加工学会誌,Vol.52 [12] (2008) pp.1718-723.
17) 小澤 匡史,細川 晃,田中隆太郎,古本 達明,上田 隆司:
“旋削加工におけるMQLの効果−工具すくい面および逃げ面に供給されるオイルミストの作用機構−”,砥粒加工学会誌,Vol.53 [2] (2009) pp.88-93.
18) Y. Lin, R. Tanaka, A. Hosokawa, T. Kusano and T. Ueda:
“Study on Chip
Control in Turning Carbon Steel by Laser Heat Treatment”, Journal of Advanced Mechanical Design, Systems, and
Manufacturing, Vol.3 [1] (2009) pp.13-21.
19) R. Tanaka, H. Morishita, A. Hosokawa, T. Ueda, T. Furumoto,
Y. Lin:
“Cutting Tool Edge Temperature in Finish Hard Turning of Case
Hardened Steel”, Key Engineering Materials
Vol.407-408 (2009) pp.538-541.
20) T. Kito, R. Tanaka, A. Hosokawa, T. Ueda, T. Furumoto:
“Prevention of Burr Formation in Face Milling of Carbon Steel by
Laser Hardening”, Key Engineering Materials Vol.407-408 (2009) pp.672-675.
21) T. Kusano, R. Tanaka, A. Hosokawa, T. Ueda, T. Frumoto:
“Influence of On-the-machine Laser Hardening on Machinability of
Carbon Steel in Turning”, Key Engineering
Materials Vol.407-408 (2009) pp.690-693.
22) 田中隆太郎,鬼頭 昂志,細川 晃,上田 隆司,古本 達明:
“炭素鋼の正面フライス加工におけるバリの抑制におよぼす被削材のレーザ熱処理の効果”,砥粒加工学会誌,Vol.53 [6] (2009) pp.47-52.
23) 林 勇伝,田中隆太郎,草野 岳彦,細川 晃,上田 隆司:
“機上レーザ熱処理による炭素鋼の被削性の改善−切りくず折断性と仕上げ面粗さへの効果−”,砥粒加工学会誌,Vol.53 [7] (2009) pp.435-439.
24) R. Tanaka, Y. Lin, A. Hosokawa, T. Ueda, K. Yamada:
“Influence of
Additional Electrical Current on Machinability of BN Free-Machining Steel in
Turning”, Journal of Advanced Mechanical Design, Systems,
and Manufacturing Vol.3 [2] (2009) pp.171-178.
25) 岡田 将人,細川 晃,田中隆太郎,上田 隆司:
“コーテッド工具のハードミリングにおける切削特性−コーテッド工具のコーティング膜材質と母材の影響−”,精密工学会誌,Vol.75 [8] (2009) pp.979-983.
26) A. Yassin, T. Ueda, T. Furumoto, A. Hosokawa, R. Tanaka and
S. Abe:
“Experimental Investigation on Cutting Mechanism of Sintered
Material Using Small Ball End Mill”,
Journal of Materials Processing Technology, Vol.209 (2009) pp.5680-5689.
27) K. Yamada, T. Ueda, A. Hosokawa, T. Furumoto and R. Tanaka:
“Dental Treatment with Laser Beam-Monitoring Methods to Realize
Safety Removal of Hard Tooth Tissues-”, International Journal of Automation
Technology Vol.3 [5] (2009) pp.494-501.
28) R. Tanaka, T. Kito, A. Hosokawa, T. Ueda and T. Furumoto:
“Machined Workpiece Edge Shape Control by Laser Hardening-Optimizing
Laser Scan Conditions and Cutter Paths-”, International Journal of
Automation Technology, Vol. 4 [1] (2010) pp.21-25.
29) A. Yassin, T. Ueda, T. Furumoto, M. Sanusi, R. Tanaka and A.
Hosokawa:
“Study on Wear Mechanism in Milling Sintered Material”, Journal of Mechanical Science and Technology Vol.24 [1]
(2010) pp.77-80.
30) T. Furumoto, T. Ueda, T. Osaka, A. Yassin, A. Hosokawa and R.
Tanaka:
“Study on Laser Assisted Milling of Ferrous Based Consolidated
Material”, Journal of Mechanical Science and Technology
Vol.24 [1] (2010) pp.127-130.
31) 古本 達明,上田 隆司,小林 直人,細川 晃,田中隆太郎,阿部 諭:
“Ybファイバーレーザによる混合金属粉末の焼結特性に関する研究(第2報)−焼結状態の定量評価手法の提案−”,精密工学会誌,Vol.76 [2] (2010) pp.173-177.
32) T. Furumoto, T. Ueda, S. Aoki, A. Kasai, A. Hosokawa, R.
Tanaka and H. Tachiya:
“Study on Measurement of Dynamic Force Induced by Nd: YAG Laser
Beam”, Journal of Laser Micro/Nanoengineering Vol.5
[1] (2010) pp.59-63.
33) 田中隆太郎,井上 豪,細川 晃,古本 達明,上田 隆司:
“レーザ複合切削による創生面の摩擦特性−静止摩擦における特性−”,日本機械学会論文集 C編,Vol.76 [764] (2010)
pp.794-799.
34) A. Hosokawa, T. Ueda, R. Onishi, R. Tanaka and T. Furumoto:
“Turning of Difficult-to-Machine Materials with Actively Driven
Rotary Tools”, CIRP Annals -
Manufacturing Technology Vol.59 (2010) pp. 89–92.
35) 鬼頭 昴志,田中隆太郎,細川 晃,上田 隆司,古本 達明:
“炭素鋼の正面フライス加工におけるバリの抑制におよぼす被削材のレーザ熱処理の効果(第2報)−レーザ照射条件およびカッターパスの最適化−”,砥粒加工学会誌,Vol.54 [6] (2010) pp.359-365.
36) T. Furumoto, T. Ueda, M, Sanusi, A. Hosokawa and R. Tanaka:
“Study on Reduction of Residual Stress Induced during Rapid
Tooling Process: Influence of Heating Conditions on Residual Stress”, Key Engineering Materials Vol. 447-448 (2010) pp.785-789.
37) 山田 啓司,加藤 寛満,上田 隆司,細川 晃,田中隆太郎:“
YAG高調波を利用したシリコンの微細加工−熱変形法によって作成したマイクロレンズの加工工学系への応用−”,精密工学会誌,Vol.76 [11] (2010) pp.1283-1292.
38) M. Okada, A. Hosokawa, R. Tanaka, T. Ueda:
“Cutting performance of PVD coated and CBN tools in hardmilling”, International Journal of Machine Tools and Manufacture,
Vol.51 [2] (2010) pp.127-132.
39) T. Ueda, Y. Wakimura, T. Furumoto, A. Hosokawa and R. Tanaka:
“Experimental Investigation on Laser Flattening of Sheet Metal”, Optics and Lasers in Engineering Vol.49
(2011) pp.137-144.
40) 田中隆太郎,井上 豪,中川 智博,細川 晃,古本 達明,上田 隆司:
“レーザ複合切削による創生面の摩擦特性(第2報)(切削における表面創生メカニズムと静止摩擦力におよぼす油剤粘度の影響)”,日本機械学会論文集C編,Vol.77 [780] (2011)
pp.3193-3198.
41) 田中隆太郎,鬼頭 昂志,細川 晃,古本 達明,上田 隆司:
“レーザ熱処理によるステンレス鋼のフライス切削における切削バリの抑制”,日本機械学会論文集C編,(2011) pp.4318-4323.
43) 岡田 将人,上田 隆司,細川 晃,田中隆太郎:
“非軸対称形状の刃先交換式ドリルを用いた難削材加工”,日本機械学会論文集C編,Vol.78 [785] (2012)
pp.252-261.
42) 上田 隆司,古本 達明,藤江 典久,細川 晃,田中隆太郎:
43) “2波長レーザを用いた硬脆材料のレーザ割断に関する研究(炭酸ガスレーザおよびEr:YAG
レーザを用いた厚肉ガラスの精密割断)”,日本機械学会論文集C編,Vol.78 [788] (2012) pp.1295-1304.
44) M. S. Abdul Aziz, T Furumoto, T. Ueda, S. Abe, A. Hosokawa
and R. Tanaka:
“Study on Thermal and Strain
Behavior in Selective Laser Sintering Process”, Key Engineering Materials, Vol.516 (2012) pp.203-208.
45) T. Ishikawa, T. Ueda, T. Furumoto, A. Hosokawa and R. Tanaka:
“Pre-Groove Development for Laser Cleaving of Brittle Materials
by Using Micro-Lens”, Journal of
Advanced Mechanical Design, Systems, and Manufacturing, Vol.6 [6] (2012)
pp.841-848.
46) H. Nishimoto, R. Tanaka, A. Hosokawa, T. Ueda and T.
Furumoto:
“Development
of tool edge temperature measurement method in wet cutting -Application for CBN
and Poly Crystalline Diamond tools-”, Journal of Advanced Mechanical Design, Systems, and
Manufacturing, Vol.6 [6] (2012) pp.916-922.
47)
T.
Furumoto, T. Ueda, T. Amino, D. Kusunoki, A. Hosokawa and R. Tanaka:
“Finishing Performance of Cooling Channel with Face Protuberance
inside the Molding Die”, Journal of Materials Processing Technology,
Vol. 212 [10] (2012) pp.2154-2160.
48) 古本 達明,楠 大樹,網野 亨,細川 晃,田中隆太郎,上田 隆司:
“遊離砥粒を用いた金型内部冷却水管の仕上げ加工表面突起付加による曲線水管の加工性改善”, 砥粒加工学会誌,Vol. 56 [10] (2012) pp.698-702.
49) 古本 達明,中谷 馨,林 鉄也,上田 隆司,細川 晃,田中隆太郎:
“Er:YAGレーザによる歯質の除去特性,注水による気泡の発現と効果”,日本機械学会論文集C編,Vol. 78 [794] (2012) pp.3594-3604.
50) 田中隆太郎,岡田 将人,中川 智博,古本 達明,細川 晃,上田 隆司:
“複合機械加工による高品位面性状を有する表面改質層の生成”,日本機械学会論文集C編,Vol. 78 [794] (2012) pp.3605-3614.
51)
M.
R. Alkahari, T. Furumoto, T. Ueda, A. Hosokawa, R. Tanaka and M. S. Abdul Aziz:
“Thermal
Conductivity of Metal Powder and Consolidated Material fabricated via Selective
Laser Melting”, Key
Engineering Materials, Vol. 523-524 (2012) pp.244-249.
52) R. Tanaka, A. Hosokawa, T. Furumoto, and T. Ueda:
“Cutting Performance of Ceramic Tools in Turning of Mild Steel”, Key Engineering Materials, Vol. 523-524 (2012) pp.493-496.
53)
田中隆太郎,西本 秀人,田中 大輔,古本 達明,細川 晃,上田 隆司:
“焼結鋼の旋削加工における工具刃先温度と仕上げ面粗さ”,砥粒加工学会誌 (2012) Vol. 56 [12] (2012) pp.819-823.
54)
R. Tanaka, S.
Yamazaki, A. Hosokawa, T. Furumoto, T. Ueda and M. Okada:
“Analysis
of Cutting Behavior during Tapping and Measurement of Tool Edge Temperature
Measured by a Two-Color Pyrometer”,
Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol.7 [2]
(2013) pp.115-124.
55)
R. Tanaka, A.
Hosokawa, T. Furumoto and T. Ueda:
“Effects of Tool Edge Geometry on Cutting Temperature in Continuous
Cutting of Case-Hardened Steel”,
International Journal of Automation Technology, Vol.7 [3] (2013) pp.313-320.
56)
J. Xu, K. Yamada,
K. Seikiya, R. Tanaka, and Y. Yamane:
“A
Basic Study on the Relations Between Machining Conditions and the Static and
Dynamic Components of Forces in Drilling”, International Journal of
Automation Technology, Vol.7 [3] (2013) pp.345-352.
57) R. Tanaka, A. Hosokawa, T. Furumoto and T. Ueda:
“Wear
Characteristics of Ceramic Tools When Turning BN Free-machining Steel”, Journal of Advanced Mechanical Design, Systems, and
Manufacturing, Vol.7
[3] (2013) pp.474-484.
58) J. Xu, K. Yamada, K. Sekiya, R. Tanaka, Y. Yamane:
“Effect of Different Features to Drill-Wear Prediction with Back
Propagation Neural Network”, Precision Engineering,
Vol.38, No.4 (2014) pp. 791-798.
59)
J. Xu, K. Yamada,
K. Sekiya, R. Tanaka, Y. Yamane:
“Comparison of Applying Static & Dynamic Features for Drill
Wear Prediction”, Journal of Advanced
Mechanical Design, and Manufacturing, Vol.8 [4] (2014) No.14-00087.
60)
T. Furumoto, A.
Koizumi, M. R. Alkahari, R. Anayama, A. Hosokawa, R. Tanaka, T. Ueda:
“Permeability and strength of a porous metal structure
fabricated by additive manufacturing”, Journal of Materials Processing Technology, 219 (2015)
pp.10-16.
61) K. Nagao, K. Yamada, K. Skiya, R. Tanaka, Y. Yamane:
“Basic
Study on Thermo Chemical Truing Method for Metal Bonded Diamond Wheels”, Key Engineering Materials, Vol.656-657 (2015) pp.180-184.
62) S. Koseki, K. Inoue, K. Uehara, H. Usuki, M. Yoshinobu, R.
Tanaka, M. Hagino:
“Damage
of PVD-coated cutting tools due to interrupted cutting of Ni-based superalloys”, Key Engineering Materials, Vol.656-657 (2015) pp.191-197.
63)
M. Okada, M. Nikawa, R. Tanaka, N. Asakawa:
“Effects
of supplying water mist and oil mist with cold air on cutting force and
temperature in endmilling of difficult-to-cut materials”, Key Engineering Materials, Vol.656-657 (2015) pp.255-260.
64) Y. Kojima, R. Tanaka, K. Sekiya, K. Yamada, Y. Yamane:
“Estimating
of the Cutting Characteristic of Tapping Tool -Cutting Temperature and
Fluctuation of Cutting Forces-”,
Key Engineering Materials, Vol. 656-657 (2015) pp.261-265.
65) N. Ishii, R. Tanaka, Y. Kojima, K. Sekiya, K. Yamada, S.
Koseki:
“Influence
of the Cutting Fluid on Tool Edge Temperature in End Milling of Titanium Alloy”, Key Engineering Materials, Vol. 656-657 (2015) pp. 296-301.
66) J. Xu, K. Yamada, K. Sekiya, R. Tanaka, Y. Yamane:
“Machine
Leaning of Cutting Conditions in Drilling Using Artificial Neural Network”, Key Engineering Materials, Vol.656-657 (2015) pp.328-334.
67) K. Sekiya, S. Watanabe, K. Yamada, R. Tanaka, Y. Yamane:
“Stability of Adhered Material to the Cutting Edge of a Cermet
Insert in Turning of an Austenitic Stainless Steel”, Key Engineering Materials, Vol.656-657 (2015) pp.363-368.
68)
R. Tanaka, A.
Hosokawa, T. Furumoto M. Okada and T. Ueda:
“Influence
of cutting fluid on tool edge temperature in end milling titanium alloy”, Journal of
Advanced Mechanical Design, Systems, and Manufacturing Vol.9, No.5, (2015)
Paper No.14-00509.
69) Y. Kojima, R. Tanaka, Y. Yamane, K. Sekiya and K. Yamada:
“Drilling of CFRP with an Electrodeposited Diamond Core Drill
–Effects of Air Assistance and Tool Shape–”, International Journal of Automation Technology Vol.10, No.3
(2016) pp.310-317.
70) I. Martinez, R. Tanaka, Y. Yamane, K. Sekiya, K. Yamada, T.
Ishihara and S. Furuya:
“Wear
mechanism of coated tool in the turning of ductile cast iron having wide range
of tensile strength”, Precision
Engineering, Vol.47 (2017) pp.46-53. Available
online 2016-7-16
71)
K. Yamada, T.
Maeda, T. Iwai, K. Sekiya, R. Tanaka:
“Photoelastic observation of stress distributions in laser
cleaving of glass substrates”, Precision
Engineering 47 (2017) pp. 333–343. Available
online: 2016-9-20.
72)
T. Inoue, K. Yamada, K. Sekiya, R. Tanaka, and Y. Yamane:
“Pulsed
Laser Surface Treatment for Improvement of Machinability”, Key Engineering Materials, Vol.725 (2016) 641-646. Available online:
2016-12-15
73)
I. Martinez,田中隆太郎,山根八洲男,山田 啓司,關谷 克彦,古屋 諭,石原 忠弥:
“組織および機械的特性の異なる球状黒鉛鋳鉄の被削性”, 砥粒加工学会誌,Vol.61, No.3
(2017) pp.139-144.
74)
I. Martinez, R.
Tanaka, Y. Yamane, K. Sekiya, K. Yamada, S. Yamada, and M. Hasegawa:
“Effect
of coating loss in the wear rate of coated tools”, Precision Engineering, Vol.50 (2017) pp.1–7. Available online: 2017-4-9
75) Y. Yamane, R. Tanaka, T. Sugino, I. Martinez, K. Yamada:
“A new
quantitative evaluation for characteristic of surface roughness in turning”, Precision Engineering, Vol.50 (2017) pp.20-26. Available online: 2017-4-23
76)
J. Xu, K. Yamada, K. Sekiya, R. Tanaka, Y. Yamane:
“Study of comparing cutting force signal features for dry, air
cooling and minimum quantity lubrication (MQL) drilling”, Journal of Advanced
Mechanical Design, Systems, and Manufacturing, Vol. 11, No. 2 (2017) p.
JAMDSM0030. Released: 2017-6-20
77)
Y. Araki, R.
Tanaka, Y. Kojima, K. Sekiya, K. Yamada, S. Koseki:
“Relationship
between Cutting Heat and Tool Edge Temperature in End milling of Titanium Alloy”, Key Engineering Materials, Vol.749
(2017) pp.15-20. Available online: 2017-8-11
78)
Y. Kojima, R.
Tanaka, Y. Yamane, K. Sekiya, K. Yamada:
“Wet
Core Drilling of CFRP with an Electrodeposited Diamond Core Drill-Effects of
Cutting Conditions on Chip Evacuation and Core Jamming-”, Key Engineering Materials, Vol.749
(2017) pp.58-64. Available online: 2017-8-11
79)
T. Kitamura, R.
Tanaka, Y. Yamane, K. Sekiya, K. Yamada:
“Difference
of Feed Mark in Cutting Fluids when Turning Stainless Steel”, Key Engineering Materials, Vol.749
(2017) pp.111-117. Available online: 2017-8-11
80) I. Martinez, R. Tanaka, Y. Yamane, K. Sekiya, K. Yamada, T.
Ishihara, S. Furuya:
“Wear
characteristics of Coated Carbide Tools in the Face Milling of Ductile Cast
Iron”, Key Engineering Materials, Vol.749
(2017) pp.178-184. Available online: 2017-8-11
81) A. Susanto, C.H. Liu, K. Yamada, Y.R. Hwang, R Tanaka, K
Sekiya:
“Application of Hilbert–Huang transform for vibration signal
analysis in end-milling”, Precision
Engineering, Vol. 53, July (2018) pp.263-277. Available online: 2018-4-22
82) A. Susanto, C.H. Liu, K. Yamada, Y.R. Hwang, R Tanaka, K
Sekiya:
“Milling Process Monitoring Based on
Vibration Analysis Using Hilbert-Huang Transform”, International Journal of Automation
Technology, Vol. 12 [5] (2018) pp.688-698. Published:
September 5, 2018
83) K. Jamkamon, K. Yamada, T. Inoue, K. Sekiya, R. Tanaka:
“Improved
Machinability of High Hardened Die Steel by Using Pulsed Laser Surface
Treatment”, International Journal of Precision Engineering
and Manufacturing, Vol.20, Issue 10 (2019) pp.1667–1676. DOI: 10.1007/s12541-019-00182-1
84) Y. Nakajima, K. Yamada, K. Fukushima, R. Tanaka and K.
Sekiya:
“Experimental
Study on the Relationship between Direction of Crack Propagation and Thermal
Stress Distribution in Laser Cleaving Process for Glass Substrate”, Journal of Laser Micro/Nanoengineering, Vol. 14, No. 2
(2019) pp.161-167.
85) T. Kitamura, R. Tanaka, Y. Yamane, K. Sekiya and K. Yamada:
“Evaluation
Method for Friction Coefficient of Machining Fluids Using Cutting Force in
Micro Feed End Milling”, Applied
Mechanics and Materials, Vol. 894 (2019) pp.158-163.
86)
K. Jamkamon, K.
Yamada, K. Sekiya and R. Tanaka:
“Effects
of Preheating Temperature at Primary Shear Zone in Laser Assisted Milling
Process”, Key Engineering Materials, Vol. 825 (2019)
pp.45-50.
87) K. Matsuda, R. Tanaka, K. Sekiya, K. Yamada:
“Cutting
Force Changes during One Cut in End Milling with a Throw-Away Insert -
Difference between Up-Cut and Down-Cut –”, Key Engineering Materials, Vol. 825 (2019) pp.123-128.
88)
Y. Yamane, R.
Tanaka, I. Martinez, Y. Jin, M. Hasegawa, K. Sekiya and K. Yamada:
“Planetary motion cross bar friction test for application in
machining process”, Precision
Engineering, Vol.62 (2020)143-150.
89) T. Kitamura, R. Tanaka, Y. Yamane, K. Sekiya, K. Yamada:
“Performance Evaluation Method for Cutting Fluids using Cutting
Force in Micro-Feed End Milling”,
Precision Engineering, Precision Engineering, Vol. 62 (2020) pp.232–243.
90) R. Tanaka, T.Y. Yeh, K. Matsuda, K. Sekiya and K. Yamada:
“Tool wear mechanism in up-cut end milling of AISI 1050 at
different feed rates”, Journal of
Advanced Mechanical Design, Systems, and Manufacturing, Vol.14, No. 3 (2020)
pp. JAMDSM0042.
91) M. Azka, K. Yamada, M. Al.Huda, K. Mani, R. Tanaka, K.
Sekiya:
“Hilbert-Huang
Transform Analysis of Machining Stability in Ball-Nose End-Milling of Curved
Surface”, International Journal of Automation Technology, Vol. 14 [3]
(2020) pp. 500-511.
92) A. Susanto, K. Yamada, R. Tanaka, Y. A. Handoko and M. F.
Subhan:
“Chatter identification in turning process based on vibration
analysis using Hilbert Huang transform”, JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, Vol. 14
[2] (2020) pp. 6856-868.
93) M. Azka, K. Yamada, M. Al Huda, R. Tanaka and K. Sekiya:
“Influence of Tool Posture and Position on Stability in Milling
with Parallel Kinematic Machine Tool”, International Journal of Precision Engineering and
Manufacturing, Vol. 21 (2020) pp. 2359-2373.
94)
H.
Hayashida, R. Tanaka, K. Sekiya, K. Yamada:
“Effect
of Cutting Fluid on Tool Wear in Finished Surface Formation Area of Rounded
Nosed Tool When Turning Alloy 304”, International Journal of Automation
Technology, Vol. 16 [5] (2022) pp. 528-535.
95)
K.
Yamada, N. Kushida, S. Wada, E. Sentoku, R. Tanaka, K. Sekiya:
“A machine learning approach for simulation of multi-stage laser
forming process”, Journal of Advanced Mechanical Design, Systems, and
Manufacturing, Vol. 17, No. 1 (2023) pp. JAMDSM0006.
96)
S.
Tanaka, R. Tanaka, K. Sekiya, K. Yamada:
“Study on Cutting Forces in Zero-cutting after Completely Stop
of Feed Motion when face milling of Alloy 718”, International Journal of
Abrasive Technology, Vol. 11, No. 3 (2023) pp.175-183.
97)
R. Sakamoto,
R. Tanaka, K. Sekiya, K. Yamada:
“Distribution of Flank Wear Width of a Rounded Nosed Insert Calculated from Nose Profile”, International Journal of Abrasive Technology, Vol. 12, No. 1 (2024) pp.26-36.
98)
J.
Mao, H. Usuki, R. Tanaka, C. Morigo, S. Yukinari
“Research on
effect of ultra-high pressure coolant supplied from flank face in end milling
of Ti-6Al-4V supported by CFD simulations”, Journal of Manufacturing
Processes, Vol. 118 (2024) pp. 15-31.
99)
R.
Sakamoto, R. Tanaka, I. Espinoza, I. Martínez, K. Sekiya, K. Yamada:
“Prediction of Surface Roughness Components in Turning with Single Point
Tool -Measurement of Tool Edge Contour and Prediction of its Position during
Cutting”, International Journal of Automation Technology, Vol. 18, No. 3
(2024), in press.
100) J. Nakagawa, Y. Yoshimi, K. Chiba, R.
Tanaka:
"Evaluation and quantification of
diffusion wear between cutting chip and workpiece using forging press",
Manufacturing Letters, Accepted.
国際会議プロシーディング Conference Proceedings
1)
R. Tanaka, Y. Yamane, K. Sekiya, N. Narutaki, T. Shiraga: “FACE MILLING OF BN ADDED STEELS”,
Proc. of the 6th International Conference on Progress of Machining Technology
(2002) pp.105-110.
2) R. Tanaka, A. Hosokawa, K. Yamada, T.
Ueda: “EFFECT OF ADDITIONAL CURRENT ON
CUTTING MECHANISM OF FREE MACHINING STEELS IN TURNING”, Proc. of the
7th International Conference on Progress of Machining Technology (2004)
786-791.
3) E. Sentoku, T. Ueda, K. Yamada, A.
Hosokawa, R. Tanaka: “INFLUENCE
OF TEMPERATURE AND PROCESS PARAMETERS ON BENDING ANGLE IN LASER FORMING”,Proc. of the 7th International Conference on
Progress of Machining Technology (2004) pp.360-365.
4) K. Yamada, T. Ueda, A. Hosokawa and R.
Tanaka: “Thermal Stress Cleaving with Pulsed YAG Laser as New Dicing Method of
Silicon Wafer”, Proc. of 4th Asian Pacific Laser Symposium (2004) CD-ROM.
5) K. Yamada, H. Mochtady, T. Ueda, A.
Hosokawa and R. Tanaka: “Rapid Fabrication of Various-shape Microlens by
Laser-induced Deformation”, Proc. of 4th. Int. Conf. of European Society for
Precision Engineering and Nanotechnology (2004) pp.57-58
6) A. Hosokawa, M. Okada, R. Tanaka, K.
Yamada T. Ueda: “Hard milling with CBN and Coated Tools”, Proc. of the 3rd
International Conference on Leading Edge Manufacturing in21st Century (2005)
pp.497-500.
7) T. Furumoto, T. Ueda, A. Hosokawa, R.
Tanaka, T. Arashi, N. Sugihara, Masaaki Waga and Akira Konno: “Tip Processing
of Quartz Optical Fiber for Dental Treatment with TiO2 Powder
-Irradiation Characteristics of TiO2-processed (TP) Fiber”, Online
Proceedings of International Congress on Laser Advanced Materials processing
2006 (2006) Online Proceedings.
8) R. Tanaka, Y. Yamane, K. Sekiya, N.
Narutaki, and T. Shiraga: “Turning of BN
free-machining steel”, Proc. of the 8th International Conference on
Progress of Machining Technology (2006) pp.477-484.
9) M. Okada, A. Hosokawa, R. Tanaka, T. Ueda:
“IN-PROCESS MONITORING OF TOOL
TEMPERATURE IN END MILLING BY NEWLY DEVELOPED COMPACT TWO-COLOR PYROMETER”,
Proc. of the 8th International Conference on Progress of Machining Technology
(2006) pp.281-284.
10) M. Ozawa, A. Hosokawa, R. Tanaka, T.
Furumoto, T. Ueda: “Minimum Quantity Lubrication Turning of Ferrous Metals - Measurement
of tool temperature using fiber-coupled two-color pyrometer –”, Proc. of the
4th International Conference on Leading Edge Manufacturing in21st Century
(2007) pp.339-342.
11) M. Okada, A. Hosokawa, R. Tanaka, T.
Ueda: “Cutting Characteristics of Coated Tools in Hardmilling”, Proc. of the
4th International Conference on Leading Edge Manufacturing in21st Century
(2007) pp.281-284.
12) R. Tanaka, A. Hosokawa, T. Ueda, T.
Furumoto, T. Kusano, Y. Lin: “Improvement of Chip Controllability of Carbon
Steel in Turning by Laser Heat Treatment”, Proc. of 23rd American Society of
Precision Engineering Annual Meeting and 12th International Conference of
Precision Engineering (2008) pp.229-232.
13) M. Ozawa, A. Hosokawa, R. Tanaka, T.
Furumoto, T. Ueda: “Minimum Quantity Lubrication Turning Using Tools with oil
Holes”, Proc. of 23rd ASPE Annual Meeting and 12th International Conference of
Precision Engineering (2008) pp.221-224.
14) T. Furumoto, T. Ueda, M. Waga, A. Kasai,
A. Hosokawa and R. Tanaka: “Study on Mechanism of Bactericidal Effect Induced
by Nd: YAG Laser Irradiation”, Variation of Impulse Stress with Absorbent,
Proc. of International Conference on Mechatronics Technology 2009 (2009)
CD-ROM.
15) T. Furumoto, T. Ueda, S. Aoki, A. Kasai,
A. Hosokawa, R. Tanaka and H. Tachiya: “Study on Measurement of Dynamic Stress
Induced by Nd: YAG Laser Beam”, Proc. of International Congress on Laser
Advanced Materials Processing 2009 (2009) pp.327-331.
16) A. Yassin T. Ueda, T. Furumoto, M.
Sanusi, R. Tanaka and A. Hosokawa: Study on Wear Mechanism in Milling Sintered
Material, Proc. of International Conference on Manufacturing, Machine Design
and Tribology 2009 (2009) pp.46.
17) T. Furumoto T. Ueda, T. Osaka, A. Yassin,
A. Hosokawa and R. Tanaka: “Study on Laser Assisted Milling of Ferrous Based
Consolidated Material”, Proc. of International Conference on Manufacturing,
Machine Design and Tribology 2009 (2009) pp.47.
18) N. Kobayashi, T. Ueda, T. Furumoto, A.
Hosokawa and R. Tanaka: “Laser Sintering Characteristics of Metallic Powder
with Yb Fiber Laser, Optimization of Processing Conditions about Laser
irradiation”, Proc. of the 5th Leading Edge Manufacturing in 21st Century
(2009) pp.593-596
19) Y. Kano, T. Ueda, T. Furumoto, A.
Hosokawa, R. Tanaka and T. Amino: “Finishing of Inner Wall of Cooling Channel
in Mold by High Speed Flowing”, Proc. of the 5th Leading Edge Manufacturing in
21st Century (2009) pp.401-404
20) R. Takeda, T. Ueda, T. Furumoto, A.
Hosokawa and R. Tanaka: “Study on Cleaving Mechanism of Silicon Wafer by Laser
Beam Irradiation”, Proc. of the 5th Leading Edge Manufacturing in 21st Century
(2009) pp.589-592
21) T. Furumoto, T. Ueda, Y. Kano, A.
Hosokawa and R. Tanaka: “Study on Inner Face Polishing of Cooling Channel
within Molding Die with Flowing Slurry”, Polishing Characteristics of Cooling
Channel Obtained by Layered Manufacturing Process, Collegr International pour
la Recherch en Productique High Performance Cutting 2010 (2010) pp.389-392.
22) T. Furumoto, T. Ueda, M. Sanusi, A.
Hosokawa and R. Tanaka: “Study on Reduction of Residual Stress Induced in Rapid
Tooling Process, Influence of Heating Conditions on Residual Stress”,
International Conferences on Precision Engineering 2010 (2010) pp.49-50.
23) T. Furumoto, T. Ueda, N. Kobayashi, A.
Hosokawa and R. Tanaka: “Study on Optimization of Consolidation Conditions by
the Monitoring of Cutting Force, Application to Rapid Tooling Processes”,
International Symposium on Flexible Automation 2010 (2010) pp.60.
24) A. Kasai, T. Furumoto, T. Ueda, M. Waga,
A. Hosokawa, R. Tanaka and H. Tachiya: “Measurement of Dynamic Stress Generated
in TiO2 Solution, Induced by Nd: YAG Laser Beam Irradiation”, Proc.
of International Conference on Mechatronics Technology 2010 (2010) pp. 337-341.
25) H. Nishimoto, R. Tanaka, A. Hosokawa, T.
Ueda and T. Furumoto: “Development of tool edge temperature measurement method
in wet cutting -Application for CBN and Poly Crystalline Diamond tools-“, Proc.
of the 6th International Conference on Leading Edge Manufacturing in21st
Century (2011) CD-ROM.
26) S. Yamazaki, R. Tanaka, A. Hosokawa, T.
Ueda and T. Furumoto and M. Okada: “Tool edge temperature of spiral tap at
tapping -Grasp of cutting behavior and measurement of tool edge temperature by
two-color pyrometer-”, Proc. of the 6th International Conference on Leading
Edge Manufacturing in21st Century (2011) CD-ROM.
27) K. Nakatani, T. Furumoto, T. Ueda, A.
Hosokawa and R. Tanaka: “Study on Temperature Measurement of Human Enamel by
Er: YAG Laser Irradiation-The Influence of Surface Temperature on the Dental
Pulp”, Proc. of the 6th International Conference on eading Edge Manufacturing
in21st Century (2011) CD-ROM.
28) T. Ishikawa, T. Ueda, T. Furumoto, A.
Hosokawa and R. Tanaka: “Thermal Stress Cleaving of Brittle Materials by Laser
Beam”, Proc. of the 6th International Conference on Leading Edge Manufacturing
in21st Century (2011) CD-ROM.
29) A. Kano, T. Ueda, T. Furumoto, A.
Hosokawa and R. Tanaka: “Study on Aircraft Materials with Laser-Aided”, Proc.
of the 6th International Conference on Leading Edge Manufacturing in21st
Century (2011) CD-ROM.
30) T. Furumoto, T. Ueda, T. Amino, S. Abe,
A. Hosokawa and R. Tanaka: “Internal Finishing of Cooling Channel in Molding
Die with Free Abrasive Grains, Influence of Face Protuberance on Finishing
Performance”, Proc. of Asian Society for Precision Engineering and
Nanotechnology 2011 (2011) CD-ROM.
31) R. Tanaka, K. Shimanuki, A.
Hosokawa, T. Furumoto, T. Ueda: “Tool Edge
Temperature in Tapping of Stainless Steel”,
Proc. of the 10th International Conference on
Progress of Machining Technology (2012) pp.109-112.
32) J. Xu, K. Yamada, K. Seikiya, R. Tanaka, Y. Yamane:
“Drill Wear Prediction with Features Extracted from the Static & Dynamic
Components of Forces by Wavelet Packet Transform Using Back Propagation Neural
Network”, Proc. of the 7th International Conference on Leading Edge
Manufacturing in 21st Century (2013) CD-ROM.
33) I. Martinez, R. Tanaka, Y. Yamane, K. Sekiya, K. Yamada,
T. Ishihara, S. Furuya: “Wear characteristics of coated carbide tools in the
turning of ductile cast iron”, Proc. of the 8th International Conference on
Leading Edge Manufacturing in21st Century (2015) CD-ROM.
34) Y. Kojima, R. Tanaka, K. Sekiya, K. Yamada: “Influence of
coating material on the curl of chip in tapping”, Proc. of the 8th
International Conference on Leading Edge Manufacturing in21st Century (2015)
CD-ROM.
35) K. Yamada, T. Maeda, R. Tanaka, K. Sekiya: “Photoelastic
observation of thermal stress in laser cleaving of hard brittle materials”,
Proc. of the 8th International Conference on Leading Edge Manufacturing in21st
Century (2015) CD-ROM.
36) A. Susanto, K. Yamada, R. Tanaka, K. Sekiya: “Study of
chatter characteristics on thin-walled turning”, Proc. of the 8th International
Conference on Leading Edge Manufacturing in21st Century (2015) CD-ROM.
37) Y. Kojima, R. Tanaka, K. Sekiya, K. Yamada: “Study on Chip Packing Load in
Tapping of AISI304 Stainless Steel using a Spiral Tap”, Proceedings of the 9th
International Conference on Leading Edge Manufacturing in 21st Century (LEM21),
(2017) Proc.USB B14.
38) A. Susanto, K. Yamada, K.
Mani, R. Tanaka, K. Sekiya: “Vibration Analysis in Milling of Thin-Walled
Workpieces Using Hilbert–Huang Transform”, Proceedings of the 9th International
Conference on Leading Edge Manufacturing in 21st Century (LEM21), (2017) Proc.USB C25.
39) J. Kamonpong, Yamada, K. Sekiya, R. Tanaka: “Effects of Preheating Temperature at Primary
Shear Zone in Laser Assisted Milling Process”, Proceedings of the International Conference on Machining, Materials and
Mechanical Technologies 2018
(2018) pp.2-6.
40) T. Kitamura, R. Tanaka, Y. Yamane, K. Sekiya, Yamada: “Evaluation Method for Machining Fluids
using Cutting Force in Micro Feed End Milling”, Proceedings of the International Conference on Machining, Materials and
Mechanical Technologies 2018
(2018) pp.20-24
41) K. Matsuda, R. Tanaka, K. Sekiya, K. Yamada: “Cutting Force Changes During One Cut in
end Milling with a Throw-away Insert -Difference between Up-cut and Down-cut”, Proceedings of the International Conference on Machining, Materials and
Mechanical Technologies 2018 (2018) pp.110-114
42) M. Azka, K. Yamada, M.
Al-Huda, Y.R. Hwang, R. Tanaka, K. Sekiya:
“Time-Frequency Analysis of Vibration in Curved Surface Milling Based on
Hilbert-Huang Transform”, Proceedings
of the International Conference on Machining, Materials and Mechanical
Technologies 2018 (2018)
pp.140-144
43) R.
Tanaka, T. Y. Yeh, K. Matsuda, K. Sekiya, K. Yamada: “Effect of Feed Rate on
Tool Wear in Up Cut End Milling of AISI 1050 at Different Cutting Speed”,
Proceedings of the 8th International Conference on Manufacturing, Machine
Design and Tribology (2019) Online Proceedings, FR-2-1.
44) T. Y. Yeh, R. Tanaka, K. Sekiya, K. Yamada, S. J. Chen: “Influence of
Friction Characteristic of Cutting Fluid Evaluated by Cutting Force in Micro
Feed End Milling on Surface Roughness”, Proceedings of the 8th International
Conference on Manufacturing, Machine Design and Tribology (2019) Online
Proceedings, FR-A-2-4.
45) A. Susanto, K. Yamada, R. Tanaka, M. Azka, K. Sekiya, M. D.
Prasetio and P. Novia: “Analysis of Transient Signal using Hilbert-Huang
Transform for Chatter Monitoring in Turning Process”, Proc. of the 4th International Conference
on Information Technology, Information Systems and Electrical Engineering
(ICITISEE-2019), Online Proceedings.
46) T. Hayashida, R. Tanaka, K. Yamada, K. Sekiya:
“Effect of lubricant on tool wear in finished surface formation area of rounded
nosed tool”, Proc. of the 10th International Conference on Leading Edge
Manufacturing in 21st Century (LEM21), (2021) pp.185-188.
47)
N. Kushida, K. Yamada, E. Sentoku, R. Tanaka, K. Sekiya: Machine Learning of Laser Forming Simulator for
Multi-stage Forming, Proc. of the 10th International Conference on Leading Edge
Manufacturing in 21st Century (LEM21), (2021) pp.325-330.
48) T. Nagano, K. Kubo, K.
Yamada, R. Tanaka, K. Sekiya: CHIP LOADING CAUSED ON ELECTROPLATED DIAMOND
WHEELS IN GRINDING PROCESS FOR CFRPS, Proceedings
of the 2022 International Symposium on Flexible Automation ISFA2022, (2022)
pp.13-14.
49) Y. Kuroda, K. Sekiya, K.
Shimatani, R. Tanaka, K. Yamada:
Observation of the built up edges in the region of generating the
finished surface, Proceedings of the 19th International Conference on Precision
Engineering (2022) C187.
50) S. Tanaka, R. Tanaka, K. Sekiya, K. Yamada: Cutting Forces in
Zero-cutting after Completely Stop of Feed Motion when face milling of Alloy
718, Proceedings of the 24th International Symposium on Advances in Abrasive
Technology, (2022) pp.509-514.
51) S. Sakamoto, R. Tanaka,
K. Sekiya, K. Yamada: Calculation of Distribution of Flank Wear Width of a
Rounded Nosed Insert from Nose Profile, Proceedings of the 24th International Symposium on Advances
in Abrasive Technology, (2022) pp.503-508
52) K. Shimatani, Y. Kudora,
K. Sekiya, R. Tanaka, K. Yamada: The shape of the build-up-edges in the width
direction, Proceedings of the International Conference on Machining, Materials
and Mechanical Technologies 2022 (2022) Paper No.0039.
53) P. H. Chou, S. Wada, K.
Yamada, E. Sentoku, R. Tanaka, K. Sekiya: Machine learning for multi-stage
laser forming-application of convolutional neural network for scanning path
prediction, Proceedings of the International Conference on Machining,
Materials and Mechanical Technologies 2022 (2022) ID:0108.
以 上