SCI Journal: (*Corresponding Author) |
---|
Research ID h-index (T.Ogi)
From 2018/4, please access to https://takashiogi.amebaownd.com/pages/1503231/page_201603171106
2017/4 - 2018/3
120 |
T. Makino, S. Nagai, F. Iskandar, K. Okuyama, T. Ogi*: Recovery and Recycling of Tungsten by Alkaline Leaching of Scrap and Charged Amino Group Assisted Precipitation, ACS Sustainable Chemistry & Engineering (IF=5.951),6(3), 4246–4252, (2018). (Ac2018/1/19,Pb2018/X/XX), DOI: 10.1021/acssuschemeng.7b04689 |
---|---|
119 |
A. F. Arif, Y. Kobayashi, E. M. Schneider, S. C Hess, R. Balgis, T. Izawa, H. Iwasaki, S. Taniguchi,T. Ogi*, K. Okuyama, W. J. Stark: Selective Low-energy Carbon Dioxide Adsorption using Monodisperse Nitrogen-rich Hollow Carbon Submicron Spheres, Langmuir (IF=3.833), 34 (1), 30-35, (2018).(Ac2017/12/12,Pb2017/X/XX) DOI: 10.1021/acs.langmuir.7b01353 |
118 |
F. G. Rinaldi, A. F. Arif, T. Ogi*, K. Okuyama, E. Tanabe :Strong Metal-Support Interactions (SMSIs) between Pt and Ti3+ on Pt/TiOx Nanoparticles for Enhanced Degradation of Organic Pollutant, Advanced Powder Technology (IF=2.659), 28 (11), 2987-2955, (2017). (Ac2017/9/11,Pb2017/9/19) DOI: https://doi.org/10.1016/j.apt.2017.09.007 |
117 |
C. W. Kartikowati, Q. Li, S. Horie, T. Ogi*, T. Iwaki, K. Okuyama :Aligned Fe3O4 magnetic nanoparticle films by magneto-electrospray method, RSC Advances (IF=3.11), 7, 40124-40130, (2017). (Ac2017/8/10,Pb2017/8/16) DOI: 10.1039/C7RA07944C |
116 |
Q. Li, S. Horie, C. Kartikowati, T. Ogi*, T. Iwaki, K. Okuyama:Correlation between particle size/domain structure and magnetic properties of highly crystalline Fe3O4 nanoparticles,Scientific Reports (IF= 4.26),7, 9894 (2017) . (Ac2017/7/31,Pb2017/8/30) DOI: |
115 |
R. Balgis, W. Widiyastuti, T. Ogi*, K. Okuyama:Enhanced electrocatalytic activity of Pt/3D hierarchical bimodal macroporous carbon nanospheres, ACS Applied Materials & Interfaces (IF= 7.504),9 (28), 23792-23799 (2017), (Ac2017/6/27,Pb2017/7/19) DOI: 10.1021/acsami.7b05873 |
114 |
R. Balgis, H. Murata, Y. Goi, T. Ogi*, K. Okuyama, L. Bao: Synthesis of Dual-Size Cellulose-Polyvinylpyrrolidone Nanofiber Composites via One-Step Electrospinning Method for High-Performance Air, Langmuir (IF= 3.993), 33(24), 6127–6134 (2017). (Ac2017/5/30,Pb2017/X/XX) DOI: 10.1021/acs.langmuir.7b01193 |
113 |
E. M. Schneider, S. Taniguchi, Y. Kobayashi, S. C. Hess, R. Balgis, T. Ogi*, K. Okuyama, W. J. Stark: Efficient recycling of polylactic acid nanoparticle templates for the synthesis of hollow silica spheres, ACS Sustainable Chemistry & Engineering (IF= 5.267), 5(6), 4941–4947 (2017). (Ac2017/5/16,Pb2017/X/XX) DOI: 10.1021/acssuschemeng.7b00338 |
112 |
U. Saleem, F. A. Permatasari, F. Iskandar, T. Ogi, K. Okuyama, Y. Dharma, A. Rusydi, K. P. Loh, M. D. Birowosuto, P. Coquet, H. Wang: Surface Plasmon Enhanced Nitrogen-doped Graphene Quantum Dots Emission by Single Bismuth Telluride Nanoplates, Advanced Optical Materials (IF= 5.359), 1700176, 1–6 (2017). (Ac2017/5/4,Pb2017/6/26) DOI: 10.1002/adom.201700176 |
111 |
A. F. Arif, R. Balgis, T. Ogi*, F. Iskandar, A. Kinoshita, K. Nakamura, K. Okuyama: Highly conductive nano-sized Magnèli phases titanium oxide (TiOx), Scientific Reports (IF= 5.228), 7, 3646 (2017). (Ac2017/4/28,Pb2017/6/16) doi:10.1038/s41598-017-03509-y |
2016/4 - 2017/3
110 |
T. Ogi*, T. Makino, S. Nagai, W. J. Stark, F. Iskandar, K. Okuyama: Facile and efficient removal of tungsten anions using lysine-promoted precipitation for recycling high-purity tungsten, ACS Sustainable Chemistry & Engineering (IF= 5.267), 5(4), 3141–3147 (2017). (Ac2017/2/18,Pb2017/5/) DOI: 10.1021/acssuschemeng.6b02934 | 109 |
R. Balgis, L. Gradon, L. Ernawati, T. Ogi*, K. Okuyama: Controlled Surface Topography of Particle Nanostructures by Spray Drying Process, AIChE Journal (IF= 2.98), 63(5), 1503–1511 (2017). (Ac2017/2/14,Pb2017/3/2) DOI: 10.1002/aic.15682 | 108 |
S. C. Hess, F. A. Permatasari, H. Fukazawa, E. M. Schneider, R. Balgis, T. Ogi*, K. Okuyama, W. J. Stark*: Direct Synthesis of Carbon Quantum Dots in Aqueous Polymer Solution: One-Pot Reaction and Preparation of Transparent UV-Blocking Films, Journal of Materials Chemistry A (IF= 8.262), 5, 5187–5194 (2017). (Ac2017/2/13,Pb2017/5/) DOI: 10.1039/C7TA00397H, From themed collection 2017 Journal of Materials Chemistry A HOT Papers | 107 |
Q. Li, C. W. Kartikowati, T. Ogi* , T. Iwaki, K. Okuyama: Facile fabrication of carbon nanotube forest-like films via coaxial electrospray , Carbon (IF= 6.198), 115, 116–119 (2017). (Ac2016/12/31,Pb2017/5/) http://dx.doi.org/10.1016/j.carbon.2016.12.095 | 106 |
L. Ernawati, R. Balgis, T. Ogi* , K. Okuyama: Tunable Synthesis of Mesoporous Silica Particle with a Unique Radially Oriented Pore Structures from Tetramethyl Orthosilicate via Oil-Water Emulsion Process, Langmuir (IF= 3.993), 33(3), 783–790 (2017). (Ac2016/12/27,Pb2016/12/27) DOI: 10.1021/acs.langmuir.6b04023 | 105 |
L. Ernawati, R. Balgis, T. Ogi* , K. Okuyama, T. Takada: Role of acetone Role of acetone on the formation of highly dispersed cationic polystyrene nanoparticles, Chemical and Process Engineering Journal (IF= 0.519), 38(1), 5–18 (2017). (Ac2016/9/28,Pb201X/XX/XX) DOI: 10.1515/cpe-2017-0002 |
---|---|
104 |
T. Ogi, Q. Li, S. Horie, A. Tameka, T. Iwaki, K. Okuyama: High-purity core-shell α″-Fe16N2/Al2O3 nanoparticles synthesized from α-hematite for rare-earth-free magnet applications, Advanced Powder Technology (IF=2.638), 27(6), 2520–2525 (2016). (Ac2016/9/13,Pb2016/11) http://dx.doi.org/10.1016/j.apt.2016.09.017 |
103 |
A. F. Arif, Y. Chikuchi, R. Balgis, T. Ogi*, K. Okuyama: Synthesis of nitrogen-functionalized macroporous carbon particles via spray pyrolysis of melamine-resin, RSC Advances (IF=3.289), 6, 83421–83428 (2016). (Ac2016/8/28,Pb2016/8/29) DOI: 10.1039/C6RA15217A |
102 |
T. Ogi*, T. Makino, E. Tanabe, F. Iskandar, K. Okuyama: Heat-treated Escherichia coli as a high-capacity biosorbent for tungsten anions, Bioresource Technology (IF=4.917), 218, 140–145 (2016).(Ac2016/6/19,Pb2016/10) doi:10.1016/j.biortech.2016.06.076 |
101 |
O. Arutanti, A. F. Arif, R. Balgis, T. Ogi*, F. Iskandar, K. Okuyama: Tailored synthesis of macroporous Pt/WO3 photocatalyst with nanoaggregates via flame assisted spray pyrolysis, AIChE Journal (IF=2.748), 62(11), 3864–3873 (2016). (Ac2016/5/28,Pb2016/11) DOI: 10.1002/aic.15349 |
100 |
A. F. Arif, Y. Kobayashi, R. Balgis, T. Ogi*, H. Iwasaki, K. Okuyama: Rapid microwave-assisted synthesis of nitrogen-functionalized hollow carbon spheres with high monodispersity, Carbon (IF=6.196), 107, 11–19 (2016). doi:10.1016/j.carbon.2016.05.048. (Ac2016/5/22,Pb2016/XX) |
99 |
T. Ogi*, K. Aishima, F. A. Permatasari, F. Iskandar, E. Tanabe, K. Okuyama: Kinetics of nitrogen-doped carbon dot formation via hydrothermal synthesis, New Journal of Chemistry (IF=3.086), 40, 5555–5561 (2016). (Ac2016/4/22,Pb2016/4/26) DOI: 10.1039/C6NJ00009F |
2015/4 - 2016/3
98 |
T. Ogi*, T. Makino, K. Okuyama, W. J. Stark, F. Iskandar: Selective Biosorption and Recovery of Tungsten from an Urban Mine and Feasibility Evaluation, Industrial & Engineering Chemistry Research (IF=2.587), 55(10), 2903 –2910 (2016). DOI: 10.1021/acs.iecr.5b04843 (Ac2016/2/24,Pb2015/??) |
---|---|
97 |
F. A. Permatasari, A. H. Aimon, F. Iskandar, T. Ogi, K. Okuyama: Role of C–N Configurations in the Photoluminescence of Graphene Quantum Dots Synthesized by a Hydrothermal Route, Scientific Reports (IF=5.578), 6, 21042 (2016). doi:10.1038/srep21042 (Ac2016/1/15,Pb2016/2/15) |
96 |
C. W. Kartikowati, A. Suhendi, R. Zulhijah, T. Ogi*, T. Iwaki, K. Okuyama: Effect of Magnetic Field Strength on the Alignment of α″-Fe16N2 Nanoparticle Films, Nanoscale (IF=7.394),8, 2648-2655, (2016). DOI: 10.1039/C5NR07859H (Ac2016/1/5,Pb2016/1/5) |
95 |
L. Bao, K. Seki, H. Niinuma, Y. Otani, R. Balgis, T. Ogi, L. Gradon, K. Okuyama: Verification of Slip Flow in Nanofiber Filter Media through Pressure Drop Measurement at Low-Pressure Conditions, Separation and Purification Technology (IF=3.091), 159, 100–107 (2016). (Ac2015/12/27,Pb2015/??) doi:10.1016/j.seppur.2015.12.045 |
94 |
L. Ernawati, T. Ogi*, R. Balgis, K. Okuyama, M. Stucki, S. C. Hess, W.J. Stark: Hollow Silica as an Optically Transparent and Thermally Insulating Polymer Additive, Langmuir (IF=4.457), 32(1), 338-345 (2016). (Ac2015/12/10,Pb2015/12/10) DOI: 10.1021/acs.langmuir.5b04063 |
93 |
T. Ogi*, R. Zulhijah, T. Iwaki, K. Okuyama: Recent progress in nanoparticle dispersion using bead mill, KONA Powder and Particle Journal (IF=1.780), 34, 3-23 (2017). Doi:10.14356/kona.2017004 (Ac2015/11/24,Pb2017/1) (Invited Revew Article) |
92 |
C. W. Kartikowati, A. Suhendi, R. Zulhijah, T. Ogi*, T. Iwaki, K. Okuyama: Preparation and evaluation of magnetic nanocomposite fibers containing α″-Fe16N2 and α-Fe nanoparticles in polyvinylpyrrolidone via magneto-electrospinning, Nanotechnology (IF=2.670), . 27(2), 025601, (2016) (Ac2015/10/16,Pb2015/11/30) 10.1088/0957-4484/27/2/025601 |
91 |
R. Balgis, A. F. Arif, T. Mori, T. Ogi*, K. Okuyama, and G. M. Anilkumar: Morphology-Dependent Electrocatalytic Activity of Nanostructured Pt/C Particles from Hybrid Aerosol–Colloid Process, AIChE Journal (IF=2.748), 62(2), 440-450 (2016). (Ac2015/9/18,Pb2016/2) DOI: 10.1002/aic.15059 One of figures has been selected as the cover figure of this journal. |
90 |
A. Suhendi, R. Zulhijah, C. W. Kartikowati, T. Ogi*, T. Iwaki, and K. Okuyama:Preparation and Characterization of Magnetic Films of Well-dispersed Single Domain of Core-Shell α″-Fe16N2/Al2O3 Nanoparticles, Advanced Powder Technology (IF=2.638), 26, 1618-1623 (2015). (Ac2015/9/12,Pb2015/9/28 online) doi:10.1016/j.apt.2015.09.005 |
89 |
R. Balgis, C. W. Kartikowati, T. Ogi*, L. Gradon, L. Bao, K. Seki, K. Okuyama: Synthesis and evaluation of straight and bead-free nanofibers for improved aerosol filtration, Chemical Engineering Science (IF=2.337), 137, 947-954 (2015). (Ac2015/8/1,Pb2015/12/1), doi:10.1016/j.ces.2015.07.038 |
88 |
S. Okazaki, K. Hamai, A. F. Arif, T. Ogi*, and K. Okuyama:Facile synthesis of spherical carbon composite particles via a dry granulation process, Carbon (IF=6.196), 94, 439-447 (2015). (Ac2015/7/10,Pb2015/11), doi:10.1016/j.carbon.2015.07.014 |
87 |
R. Zulhijah, A. Suhendi, K. Yoshimi, C. Kartikowati, T. Ogi*, T. Iwaki and K. Okuyama: Low-Energy Bead-Mill Dispersion of Agglomerated Core-Shell α -Fe/Al2O3 and α″-Fe16N2/Al2O3 Ferromagnetic Nanoparticles in Toluene, Langmuir (IF=4.384), 31(22), 6011-6019 (2015). (Ac2015/5/19,Pb2015/5/XX), DOI:10.1021/acs.langmuir.5b00901 |
86 |
H. Iwasaki, T. Ogi*, F. Iskandar, K. Aishima, and K. Okuyama: Microwave synthesis of homogeneous and highly luminescent BCNO nanoparticles for the light emitting polymer materials, Journal of Luminescence (IF=2.367), 166, 148-155 (2015). (Ac2015/5/12,Pb2015/10), doi:10.1016/j.jlumin.2015.05.012 |
2014/4 - 2015/3
85 |
A. F. Arif, R. Balgis, T. Ogi, T. Mori and K. Okuyama: Experimental and Theoretical Approach to Evaluation of Nanostructured Carbon Particles Derived from Phenolic Resin via Spray Pyrolysis, Chemical Engineering Journal (IF=4.058), 271, 79-86 (2015). (Ac2015/2/23,Pb2015/1/1),doi:10.1016/j.cej.2015.02.078 |
---|---|
84 |
O. Arutanti, A. B. D. Nandiyanto, T. Ogi*, T.O. Kim, and K. Okuyama: Influences of Porous Structurization and Pt Addition on the Improvement of Photocatalytic Performance of WO3 Particles, ACS Applied Materials & Interfaces (IF=5.900), 7(5), 3009-3017 (2015).(Ac2015/1/22,Pb2015/1/21), DOI: 10.1021/am507935j |
83 |
K.J. Yim,D.K. Song, C.S. Kim, N.G. Kim, T. Iwaki, T. Ogi, K. Okuyama, S.E. Lee, and T.O. Kim:Selective, high efficiency reduction of CO2 in a non-diaphragm-based electrochemical system at low applied voltage, RSC Advances (IF=3.708), 5, 9278-9282 (2015).(Ac2014/12/22,Pb201X/X). |
82 |
R. Zulhijah, A. B. D. Nandiyanto, T. Ogi*, T. Iwaki, K. Nakamura, and K. Okuyama: Effect of oxidation on a"-Fe16N2 phase formation from plasma-synthesized spherical core-shell a-Fe/Al2O3 nanoparticles, Journal of Magnetism and Magnetic Materials (IF=2.002), 381, 89-98 (2015). (Ac2014/12/12,Pb2015/5). doi:10.1016/j.jmmm.2014.12.015 |
81 |
R. Balgis, T. Ogi*, A.F. Arif,G. Anilkumar, T. Mori, and K. Okuyama: Morphology control of hierarchical porous carbon particles from phenolic resin and polystyrene latex template via aerosol process, Carbon (IF=6.160), 84, 281-289 (2015).(Ac2014/12/4,Pb2015/4). DOI: 10.1016/j.carbon.2014.12.010 |
80 |
T. Ogi*, H. Iwasaki, K. Aishima, F. Iskandar, W-N Wang, K Takimiya, and K. Okuyama: Transient Nature of Graphene Quantum Dot Formation via a Hydrothermal Reaction, RSC Advances (IF=3.708), 4, 55709-55715 (2014).(Ac2014/10/21,Pb201X/X). DOI: 10.1039/C4RA09159K |
79 |
R. Balgis, T. Ogi*, W.N. Wang,G. Anilkumar, S. Sago, and K. Okuyama:Aerosol Synthesis of Self-Organized Nanostructured Hollow and Porous Carbon Particles using a Dual Polymer System, Langmuir (IF=4.384) 30, 11257-11262 (2014). (Ac2014/9/11,Pb201X/X). DOI: 10.1021/la502545d |
78 |
A. B. D. Nandiyanto, A. Suhendi, T. Ogi*, R.Umemoto, and K. Okuyama: Size- and Charge-controllable Polystyrene Spheres for Templates in the Preparation of Porous Silica Particles with Tunable Internal Hole Configurations, Chemical Engineering Journal (IF=4.058), 256, 421-430 (2014). (Ac2014/7/2,Pb2014/11/15). DOI: 10.1016/j.cej.2014.07.005 |
77 |
T. Tahara, Y. Imajou, A. B. D. Nandiyanto, T. Ogi*, T. Iwaki, and K. Okuyama: Low-energy bead-milling dispersions of rod-type titania nanoparticles and their optical properties, Advanced Powder Technology (IF=1.65) ,25(5), 1492-1499 (2014). (Ac2014/4/14,Pb2014/9). DOI: 10.1016/j.apt.2014.04.004 |
76 |
R Zulhijah, A. B. D. Nandiyanto, T. Ogi*, T. Iwaki, K. Nakamura, K. Okuyama: Gas Phase Preparation of Spherical Core-Shell a”-Fe16N2/SiO2 Magnetic Nanoparticles, Nanoscale (IF=6.23), 6, 6487-6491 (2014). (Ac2014/4/12,Pb2014/5). DOI: 10.1039/c3nr06867f |
2013/4 - 2014/3
75 |
T. Ogi*, H. Iwasaki, A. B. D. Nandiyanto, F. Iskandar, W.-N. Wang, K. Okuyama: Direct White Light Emission from a Rare-Earth-Free Aluminium-Boron-Carbon-Oxynitride Phosphor, Journal of Materials Chemistry C (IF=6.101 until 2013), 2(21), 4297-4303, (2014). (Ac2014/3/13,Pb201X/X). DOI: 10.1039/C3TC32314E |
---|---|
74 |
岡崎 精二, 濱井健太, 坂本 明男, 荻 崇*, 奥山 喜久夫: 乾式造粒法による等方性結晶を持つ球形黒鉛材料の合成, 化学工学論文集 (IF=0.312), 40(3), 234–239 (2014). (Ac2014/2/26,Pb2014/5)., S. Okazaki, K. Hamai, A. Sakamoto, T. Ogi*, K. Okuyama: Synthesis of Spherical Graphitized Carbon Powder with Homolytic Crystals by a Dry Granulation Process, Kagaku Kogaku Ronbunshu (IF=0.312), 40(3), 234–239 (2014). (Ac2014/2/26,Pb2014/5). http://dx.doi.org/10.1252/kakoronbunshu.40.234 |
73 |
A.B.D.Nandiyanto, T. Ogi*, K. Okuyama:a: Control of the Shell Structural Properties and Cavity Diameter of Hollow Magnesium Fluoride Particles, ACS Applied Materials & Interfaces (IF=5.008), 6, 4418-4427, (2014). (Ac2014/2/21,Pb2014/3) DOI: 10.1021/am500139m |
72 |
S. Hatakeyama, K. Ikeda, S. Hanaoka, I. Watanabe, T. Arakaki, H. Bandow, Y. Sadanaga, S. Kato, Y. Kajii, D. Zhang, K. Okuyama, T. Ogi, T. Fujimoto, T. Seto, A. Shimizu, N. Sugimoto, A. Takami: Aerial observations of air masses transported from East Asia to the Western Pacific: Vertical structure of polluted air masses, Atmospheric Environment (IF=3.110), 97, 456-461, (2014). (Ac2014/2/19,Pb2014/1) DOI: 10.1016/j.atmosenv.2014.02.040 |
71 |
H. Fujiwara, Y. Sadanag, J. Urata, Y. Masui, H. Bandow, K. Ikeda, S. Hanaoka, I. Watanabe, T. Arakaki, S. Kato, Y. Kajii, D. Zhang, K. Hara, T. Fujimoto, T. Seto, K. Okuyama, T. Ogi, A. Takami, A. Shimizu, S. Hatakeyama: Aerial observation of nitrogen compounds over the East China Sea in 2009 and 2010, Atmospheric Environment (IF=3.110), 97, 462-470, (2014). (Ac2014/1/28,Pb2014/11) DOI: 10.1016/j.atmosenv.2014.01.064 |
70 |
B. W. Nuryadin, T. P. Pratiwi, F. Iskandar, M. Abdullah, Khairurrijal, T. Ogi, K. Okuyama: Photoluminescence Optimization of BCNO Phosphors Synthesized Using Citric Acid as a Carbon Source, Advanced Powder Technology (IF=1.650), 25(3), 891-895, (2014). (Ac2014/1/12,Pb2015/5) DOI: 10.1016/j.apt.2014.01.003 |
69 |
O. Arutanti, A. B. D. Nandiyanto, T. Ogi*, F. Iskandar, T. O. Kim, K. Okuyama: Synthesis of Composite WO3/TiO2 Nanoparticles by Flame-assisted Spray Pyrolysis and Their Photocatalytic Activity, Journal of Alloys and Compounds(IF=2.390), 59(5), 121–126 (2014). (Ac2013/12/23,Pb2014/4) DOI: 10.1016/j.jallcom.2013.12.218 |
68 |
I. D. Faryuni, B. W. Nuryadin, F. Iskandar, M. Abdullah, Khairurrijal, T. Ogi, K. Okuyama: Synthesis and photoluminescence of BCNO/SiO2 nanocomposite phosphor materials, Journal of Luminescence(IF=2.144), 148, 165–168 (2014). (Ac2013/12/13,Pb2014/4) DOI: 10.1016/j.jlumin.2013.12.033 |
67 |
T. Ogi*, A.B.D. Nandiyanto, K. Okuyama: Nanostructuring strategies in functional fine-particle synthesis towards resource and energy saving applications, Advanced Powder Technology, (IF=1.650),25(1), 3-17, (2014). (Ac2013/11/12,Pb2014/1) DOI: 10.1016/j.apt.2013.11.005 (Invited Revew Article) |
66 |
R. Balgis,S. Sago, G.M. Anilkumar, T. Ogi*, K. Okuyama: Self-Organized Macroporous Carbon Structure Derived from Phenolic Resin via Spray Pyrolysis for High-Performance Electrocatalyst, ACS Applied Materials & Interfaces(IF=5.008), 5 (22), 11944–11950 (2013). (Ac2013/10/31,Pb2013/10) DOI: 10.1021/am403695u |
65 |
岡崎 精二, 山口 浩平, 坂本 明男, 荻 崇*, 奥山 喜久夫: 炭素材料粉末の黒鉛化処理における加熱雰囲気の影響, 化学工学論文集 (IF=0.312), 40 (1), 1–6 (2014).(Ac2013/10/07,Pb2014/1), S. Okazaki, K. Yamaguchi, A. Sakamoto, T. Ogi*, K. Okuyama: Effect of gas atmosphere on graphitization of carbon powder, Kagaku Kogaku Ronbunshu(IF=0.312), 40(1), 1–6 (2014).(Ac2013/10/07,Pb2014/1). http://dx.doi.org/10.1252/kakoronbunshu.40.12 |
64 |
A. Suhendi, A. B. D. Nandiyanto, M.M. Munir, T. Ogi*, L. Gradon, K. Okuyama: Self-assembly of colloidal nanoparticles inside charged droplets during spray-drying in the fabrication of nanostructured particles, Langmuir(IF=4.187), 29 (43), 13152–13161 (2013). (Ac2013/09/26,Pb2013/9) DOI: 10.1021/la403127e |
63 |
R. Zulhijah, K. Yoshimi, A.B.D. Nandiyanto, T. Ogi*, T. Iwaki, K. Nakamura, K. Okuyama: a"-Fe16N2 phase formation of plasma-synthesized core-shell type a-Fe nanoparticles under various conditions, Advanced Powder Technology(IF=1.650), 25(2). 582-590, (2014). (Ac2013/09/14,Pb2014/3) DOI: 10.1016/j.apt.2013.09.006 |
62 |
T. Ogi*, Y. Sakamoto, A.B.D. Nandiyanto, K. Okuyama: Biosorption of tungsten by Escherichia coli for environmentally friendly recycling system, Industrial and Engineering Chemistry Research(IF=2.206), 52 (40), 14441–14448 (2013). (Ac2013/09/07,Pb2013/9) DOI: 10.1021/ie401193y |
61 |
O. Arutanti, T. Ogi*, A.B.D. Nandiyanto, F. Iskandar, K. Okuyama:Controllable crystallite and particle sizes of WO3 particles prepared by a spray-pyrolysis method and their photocatalytic activity, AlChE Journal (IF=2.261),60(1), 41-49 (2014). (Ac2013/08/30,Pb2014/1) DOI: 10.1002/aic.14233 |
60 |
A.B.D.Nandiyanto, O. Arutanti, A. Suhendi, T. Ogi*, F. Iskandar, T.O. Kim, K. Okuyama: Synthesis of Spherical Macroporous WO3 Particles and Their High Photocatalytic Performance, Chemical Engineering Science (IF=2.386),101(20), 523-532 (2013). (Ac2013/06/27,Pb2013/9) DOI: 10.1016/j.ces.2013.06.049 |
59 |
田原 隆志, 院去 貢, 今城 祐二, 荻 崇*, 奥山 喜久夫:2軸式ビーズミルによるチタニアナノ粒子の分散,凝集および再分散過程における粒子特性の変化, 化学工学論文集 (IF=0.312), 39 (5), 426–432 (2013).(Ac2013/06/14,Pb2013/10), T. Tahara, M. Inkyo, Y. Imajou, T. Ogi* , K. Okuyama:Change in Characteristics of Titania Nanoparticles during the Process of Dispersion, Agglomeration and Re-dispersion with a Dual-axis Beads-Mill ,Kagaku Kogaku Ronbunshu (IF=0.312),39 (5), 426–432 (2013).(Ac2013/06/14,Pb2013/10) http://dx.doi.org/10.1252/kakoronbunshu.39.426 |
58 |
A. Suhendi, A. B. D. Nandiyanto, M. M. Munir, T. Ogi*, K. Okuyama: Preparation of agglomeration-free spherical hollow silica particles using an electrospray method with colloidal templating, Materials Letters,(IF=2.307),106(1), 432-435 (2013).(Ac2013/05/16,Pb2013/9) DOI: 10.1016/j.matlet.2013.05.056 |
57 |
A.B.D. Nandiyanto, A. Suhendi, O. Arutanti, T. Ogi*, K. Okuyama: Influences of surface charge, size, and concentration of colloidal nanoparticles on fabrication of self-organized porous silica in film and particle forms, Langmuir (IF=4.086),29(21), 6262-6270 (2013).(Ac2013/05/02,Pb2013/5/2) DOI: 10.1021/la401094u |
56 |
S. Sago, A. B. Suryamas, G. M. Anilkumar, T. Ogi*, K. Okuyama: In situ growth of Pt nanoparticles on electrospun SnO2 fibers for anode electrocatalyst application, Materials Letters (IF=2.307),105(15), 202-205 (2013).(Ac2013/04/04,Pb2013/8) DOI: 10.1016/j.matlet.2013.04.007 |
2012/4 - 2013/3
55 |
T. Ogi*, A.B.D. Nandiyantio, K. Okino, F. Iskandar, W-N Wang, E. Tanabe, K. Okuyama:Towards better phosphor design: effect of SiO2 nanoparticles on photoluminescence enhancement of YAG:Ce, ECS Journal of Solid State Science and Technology,(new Journal), 2(5), R91-95, (2013).(Ac2013/3/25,Pb2013/0404) |
---|---|
54 |
T. Ogi, A.B.D. Nandiyantio, Y. Kisakibaru, K. Nakamura, T. Iwaki, K. Okuyama:Facile synthesis of single-phase spherical α"-Fe16N2/Al2O3 core-shell nanoparticles via a gas-phase method, Journal of Applied Physics,(IF=2.168)113(16), 164301-1~164301-5 (2013). (Ac2013/3/12,Pb2013/4) |
53 |
T. Ogi*, N. Tajima, R. Balgis, H. Setyawan, K. Okuyama: Influence of formic acid on electrochemical properties of high-porosity Pt/TiN nanoparticle aggregates, AIChE Journal , (IF=2.261),59(8), 2753-2760 (2013). (Ac2013/2/5,Pb2013/8) |
52 |
荻 崇*,小野 瞳,包 理,新沼 仁,奥山 喜久夫:静電紡糸法によるナノファイバーの形態制御とエアフィルタへの応用,化学工学論文集 (IF=0.312), 40(2), 1-6 (2014).(Ac2013/1/28,Pb2014/2). T. Ogi*, H. Ono, L. Bao, H. Ninuma, K. Okuyama:Morphology-controlled synthesis of electrospun nanofibers and their application for aerosol filtration,Kagaku Kogaku Ronbunshu (IF=0.312),40(2), 1-6 (2014).(Ac2013/1/28,Pb2014/2). |
51 |
A. B. Suryamas, G. M. Anilkumar., S. Sago, T. Ogi*, K. Okuyama: Electrospun Pt/SnO2 nanofibers as an excellent electrocatalysts for hydrogen oxidation reaction with ORR-blocking characteristic, Catalysis Communications, (IF=2.986), 33, 11-14, (2013). (Ac2012/12/14,Pb2013/5/5) |
50 |
I. M. Joni, T. Ogi, T. Iwaki, and K.Okuyama: Synthesis of a colorless suspension of TiO2 nanoparticles by nitrogen doping and the bead mill dispersion process, Industrial & Engineering Chemistry Research,(IF=2.237),52 (2), 547-555, (2012). (Ac2012/12/13,Pb2012/12/13) |
49 |
R Balgis, G. M. Anilkumar, S. Sago, T. Ogi*, K. Okuyama: Ultrahigh oxygen reduction activity of Pt/nitrogen-doped porous carbon microspheres prepared via spray-drying, Journal of Power Sources, (IF=4.951), 229(1), 58-64 (2013). (Ac2012/11/24,Pb2013/5) |
48 |
A. Suhendi, M. Munir, A. Suryamas, A.B.D. Nandiyanto, T. Ogi, K. Okuyama: Control of cone-jet geometry during electrospray by an electric current, Advanced Powder Technology (IF=1.612),24,2, 532-536 (2013). (Ac2012/10/30,Pb2013/6) |
47 |
A. Suhendi, A. B. D. Nandiyanto, T. Ogi, K. Okuyama: Agglomeration-free core-shell polystyrene/silica particles preparation using an electrospray method and additive-free cationic polystyrene core, Materials Letters (IF=2.307),91(15), 161-164 (2013). (Ac2012/9/12,Pb2013/5) |
46 |
T. Ogi*, A. B. D. Nandiyanto, W-N Wang, F. Iskandar, K. Okuyama: Direct synthesis of spherical YAG:Ce phosphor from precursor solution containing polymer and urea, Chemical Engineering Journal (IF=3.461), 210(1), 461-466, (2012). (Ac12/9/4,Pb12/11/xx) |
45 |
A. B. D. Nandiyanto, T. Ogi, K. Okuyama: Doughnut magnesium fluoride nanoparticles prepared by an electron-beam irradiation Method, Journal of Nanoparticle Research (IF=3.287), 14 (10), 1182 (2012). (Ac2012/8/30,Pb2012/9) |
44 |
A. B. D. Nandiyanto, T. Iwaki, T. Ogi*, K. Okuyama: Mesopore-free silica shell with nanometer-scale thickness-controllable on cationic polystyrene core, Journal of Colloid and Interface Science (IF=3.070),389(1), 134-146, (2013). (Ac2012/8/28,Pb2013/1/1) |
43 |
T. Ogi*, F. Iskandar, A. B. D. Nandiyanto, W-N Wang, K. Okuyama: Influence of polymer decomposition temperature on the formation of rare-earth free boron carbon oxynitride phosphors, Journal of Chemical Engineering of Japan (IF=0.662), 45(12), 995-1000, (2012). (Ac2012/6/23,Pb2012/12) (This paper was selected to be awarded JCEJ “Outstanding Paper Award of 2012”) |
42 |
R. Balgis, G. M. Anilkumar, S. Sago, T. Ogi*, and K. Okuyama: Rapid in-situ synthesis of spherical microflower Pt/C catalyst via spray-drying for high performance fuel cell application, Fuel Cells (IF=3.32), 12(4), 665-669, (2012), .(Ac5/16,Pb12/8) |
41 |
A.B.D., Nandiyanto,Y. Akane,T. Ogi, and K. Okuyama:Mesopore-free hollow silica particles with controllable diameter and shell thickness via an additive-free synthesis, Langmuir (IF=4.269), 28(23), 8616-8624,(2012). (Ac5/16,Pb12/5) |
2011/4 - 2012/3
40 |
M.M. Munir, A. Suhendi, T. Ogi, F. Iskandar and K. Okuyama: Ion-induced nucleation rate measurement in SO2/H2O/N2 gas mixture by soft X-ray ionization at various pressures and temperatures, Advanced Powder technology.(IF=0.840),24(1), 143-149, (2013).(Ac2012/3/29,Pb2013/1). |
---|---|
39 |
T. Ogi*, Y. Kisakibaru, Y. Kaihatsu, W. N. Wang, M. M. Munir, K. Okuyama: Preparation and characterization of boron oxide-based red-emitting phosphors using Eu, Al and Ca additives, Materials Chemistry and Physics (IF=2.353), 133(1), 392-397, (2012). (Ac1/18,Pb2012/3) |
38 |
A. B. Nandiyanto, A. Suhendi, T. Ogi*, T. Iwaki, K. Okuyama: Synthesis of additive-free cationic polystyrene particles with controllable size for hollow template applications, Colloids and Surfaces A: Physicochemical and Engineering Aspects (IF=2.130), 396, 96-105, (2012). (Ac12/15,Pb2012/2) |
37 |
I. M. Joni, T. Ogi, A. Purwanto, K. Okuyama, T. Saitoh, K. Takeuchi: Decolorization of beads-milled TiO2 nanoparticles suspension in an organic solvent, Advanced Powder Technology (IF=0.636), 23(1), 55-63, (2012). (Ac12/13,Pb2012/1) |
36 |
T. Ogi, K. Tamaoki, N. Saitoh, A. Higashi, Y. Konishi: Recovery of indium from aqueous solutions by the Gram-negative bacterium Shewanella algae, Biochemical Engineering Journal (IF=2.692), 63(15), 129-133, (2012). (Ac11/22,Pb2012/4/15) |
35 |
R. Balgis, G. M. Anilkumar, S. Sago, T. Ogi*, K. Okuyama: Nanostructured design of electrocatalyst support materials for high-performance PEM fuel cells applications, Journal of Power Sources (IF=4.283), 203, 26-33, (2012).(Ac11/21,Pb2012/4/1) |
34 |
H. Widiyandari, A. Purwanto, R. Balgis, T. Ogi*, K. Okuyama: CuO/WO3 and Pt/WO3 nanocatalysts for efficient pollutant degradation using visible light irradiation, Chemical Engineering Journal (IF=3.074), 180(15),323-329, (2012) (Ac11/1,Pb2012/1) |
33 |
I. Matsui, T. Ogi, F. Iskandar, K. Okuyama: Perpendicular easy axis alignment of FePt nanoparticles on a platinum-(001) substrate for high-density magnetic recording, Journal of Applied Physics (IF=2.072),110(8), 083906 (2011). (Ac8/11,Pb2011/10) |
32 |
A. B. D. Nandiyanto , T. Ogi* , A. Ohmura, E. Tanabe K. Okuyama : Liquid-phase synthesis of CaF2 particles and their low refractive index characterization, KONA Powder and Particle Journal (IF=0.486), 29, 141-157, (2011). (Ac8/6,Pb10/20) |
31 |
I. M. Joni, R. Balgis, T. Ogi, K. Okuyama: Surface functionalization for dispersing and stabilizing hexagonal boron nitride nanoparticle by bead milling, Colloids and Surfaces A:Physicochemical and Engineering Aspects (IF=2.130), 388(1-3), 49-58, (2011). (Ac8/6,Pb2011/9) |
30 |
A. B. Suryamas, M. M. Munir, T. Ogi, Khairurrijal, K. Okuyama: Intense green and yellow emissions from electrospun BCNO phosphor nanofibers, Journal of Materials Chemistry (IF=5.099), 21, 12629-12631, (2011). (Ac7/8,Pb2011/7) |
29 |
S. Y. Lee, H. Chang, T. Ogi, F. Iskandar, K.Okuyama: Measuring the effective density, porosity, and refractive index of carbonaceous particles by tandem aerosol techniques, Carbon (IF=4.893), 49, 2163-2172, (2011/6). |
28 |
R. Balgis, F. Iskandar, T. Ogi, A. Purwanto, K. Okuyama: Synthesis of uniformly porous NiO/ZrO2 particles, Materials Research Bulletin (IF=2.145), 46, 708-715, (2011/5). |
27 |
N. Hagura, T. Ogi, T. Shirahama, F. Iskandar, K. Okuyama: Highly luminescent silica-coated ZnO nanoparticles dispersed in an aqueous medium, Journal of Luminescence (IF=1.847), 131, 921-925 (2011/5). |
2010/4 - 2011/3
26 |
W. N. Wang, T. Ogi, Y. Kaihatsu, F. Iskandar, K. Okuyama: Novel rare-earth-free tunable-color-emitting BCNO phosphors, Journal of Materials Chemistry (IF=6.101), 21,5183-5189 (2011/2). (Invited Highlight Article) (Highly cited article: Total Web of Science=30) |
---|---|
25 |
A. Purwanto, H. Widiyandari, T. Ogi, K. Okuyama: Role of particle size for platinum-loaded tungsten oxide nanoparticles during dye photodegradation under solar-simulated irradiation, Catalysis Communications (IF=2.827), 12,525-529, (2011/2). |
24 |
A. B. D. Nandiyanto, T. Ogi, F. Iskandar, K. Okuyama: Highly Ordered Porous Monolayer Generation by Dual-Speed Spin-Coating with Colloidal Templates, Chemical Engineering Journal (IF=3.074), 167, 409-415 (2011/2). |
23 |
T. Ogi, R. Honda, K. Tamaoki, N. Saitoh, Y. Konishi: Direct room-temperature synthesis of a highly dispersed Pd nanoparticle catalyst and its electrical properties in a fuel cell, Powder Technology (IF=1.887) , 36(4) 288-292 (2011/10). |
22 |
M. M. Munir, A. Suhendi, T. Ogi, F. Iskandar, K. Okuyama: Experimental evaluation of the pressure and temperature dependence of ion-induced nucleation, Journal of Chemical Physics, 133, 124315-1-124315-8 (2010/9). |
21 |
A. B. Suryamas, M. M. Munir, T. Ogi, C. J. Hogan Jr., K. Okuyama: Photoluminescent ZrO2:Eu3+ nanofibers prepared via electrospinning, Japan Journal of Applied. Physics (IF=1.138), 49, 115003(2010/11). |
20 |
Y. Kaihatsu, W. N. Wang, F. Iskandar, T. Ogi, K. Okuyama: Effect of the carbon source on the luminescence properties of boron carbon oxynitride (BCNO) phosphor particles, Journal of the Electrochemical Society (IF=2.241), 157(10), J329-J333 (2010/8). |
19 |
A. Nandiyanto, F. Iskandar, T. Ogi, K. Okuyama: Nanometer to submicrometer magnesium fluoride particles with controllable morphology, Langmuir (IF=4.268), 26(14), 12260-12266 (2010/7). |
18 |
D. Hidayat, W. Widiyastuti, T. Ogi, K. Okuyama: Droplet generation and nanoparticle formation in low-pressure spray pyrolysis, Aerosol Science and Technology (IF=2.739), 44(8), 692-705 (2010/8). |
17 |
玉置洸司郎, 斉藤範三, 荻 崇, 野村俊之, 小西 康裕: 金属イオン還元細菌Shewanella algaeによるパラジウムの還元・回収, 化学工学論文集 (IF=0.312), 第36巻, 第4号, 288-292 (2010). K.Tamaoki, N.Saitoh, T.Ogi. T.Nomura, Y.Konishi: Microbial reduction and recovery of palladium using metal Ion-reducing bacterium Shewanella algae, Kagaku Kogaku Ronbunshu, 36(4), 288-292, (2010). |
16 |
T. Ogi, N. Saitoh, T. Nomura, Y. Konishi: High yield synthesis of single-crystalline gold nanoplates using the metal ion-reducing bacteria, Transactions of the Materials Research Society of Japan, 35(1), 19-22, (2010). |
15 |
T. Ogi, N. Saitoh, T. Nomura, Y. Konishi: Room-temperature synthesis of gold nanoparticles and nanoplates using Shewanella algae cell extract, Journal of Nanoparticle Research (IF=3.250), 12, 2531-2539 (2010). |
2009
14 |
F. Iskandar, S. G. Kim, A. B. D. Nandiyanto, Y. Kaihatsu, T. Ogi, K. Okuyama: Direct synthesis of hBN/MWCNT composite particles using spray pyrolysis, Journal of Alloys and Compounds (IF=2.135), 471(1-2), 166-171, (2009). |
---|---|
13 |
T. Ogi, D. Hidayat, F. Iskandar, A. Purwanto, K. Okuyama: Direct synthesis of highly crystalline transparent conducting oxide nanoparticles by low pressure spray pyrolysis, Advanced Powder Technology (IF=0.636), 20(2), 203-209, (2009). |
12 |
T. Ogi, Y. Kaihatsu, F. Iskandar, E. Tanabe, K. Okuyama: Synthesis of nanocrystalline GaN from Ga2O3 nanoparticles derived from salt-assisted spray pyrolysis, Advanced Powder Technology (IF=0.636), 20(1), 29-34, (2009). |
2008
11 |
A. Purwanto, W. N. Wang, T. Ogi, I. W. Lenggoro, E. Tanabe, K. Okuyama: High Luminance YAG:Ce nanoparticles Fabricated from Urea Added Aqueous Precursor by Flame Process, Journal of Alloys and Compounds (IF=2.135), 463 (1-2), 350-357, (2008). (Highly cited article: Total Web of Science=40, Top 3% among 3837 articles in 2008) |
---|---|
10 |
T. Ogi, Y. Kaihatsu, F. Iskandar, W. N. Wang, K. Okuyama: Facile synthesis of new full-color-emitting BCNO phosphors with high quantum efficiency, Advanced materials (IF=10.857), 20(17), 3235-3238, (2008). (Highly cited article: Total Web of Science=58) |
9 |
D. Hidayat, T. Ogi, F. Iskandar, K. Okuyama: Single crystal ZnO:Al nanoparticles directly synthesized using low-pressure spray pyrolysis, Materials Science and Engineering B: Solid-State Materials for Advanced Technology (IF=1.756), 151(3), 231-237,(2008). |
2007
8 |
荻 崇, フェリーイスカンダル, 矢吹彰広, 奥山喜久夫: テンプレート材料を用いた二流体ノズル噴霧乾燥法による多孔質から中空粒子への形態制御, 化学工学論文集(IF=0.312), 33(5), 468-475, (2007). T. Ogi, F. Iskandar, A. Yabuki, K. Okuyama: Control of particle morphology from porous to hollow by spray-drying with a two-fluid nozzle and template materials, Kagaku Kogaku Ronbunshu (IF=0.312), 33(5), 468-475, (2007). |
---|---|
7 |
W. N. Wang, W. Widiyastuti, T. Ogi, I. W. Lenggoro, K. Okuyama: Correlations between crystallite/particle size and photoluminescence properties of submicrometer phosphors, Chemistry of Materials (IF=6.397), 19(7), 1723-1730, (2007). (Highly cited article: Total Web of Science=115, Top 4% among 968 articles in 2007) |
6 |
T. Ogi, L. B. Modesto-Lopez, F. Iskandar, K. Okuyama: Fabrication of a large area monolayer of silica particles on a sapphire substrate by a spin coating method, Colloids and Surfaces a-Physicochemical and Engineering Aspects (IF=1.988), 297(1-3), 71-78, (2007). (Highly cited article: Total Web of Science=36) |
2006
5 |
T. Ogi, F. Iskandar, Y. Itoh, K. Okuyama: Characterization of dip-coated ITO films derived from nanoparticles synthesized by low-pressure spray pyrolysis, Journal of Nanoparticle Research (IF=3.250), 8(3-4), 343-350, (2006). |
---|---|
4 |
F. Iskandar, T. Ogi, K. Okuyama: Simple synthesis of GaN nanoparticles from gallium nitrate and ammonia aqueous solution under a flow of ammonia gas, Materials Letters (IF=1.940), 60(1), 73-76, (2006). |
2005
3 |
T. Ogi, Y. Itoh, M. Abdullah, F. Iskandar, Y. Azuma, K. Okuyama: Fabrication and photoluminescence of highly crystalline GaN and GaN : Mg nanoparticles, Journal of Crystal Growth (IF=1.534) , 281(2-4), 234-241, (2005). |
---|---|
2 |
H. Chang, I. W. Lenggoro, T. Ogi, K. Okuyama: Direct synthesis of barium magnesium aluminate blue phosphor particles via a flame route, Materials Letters (IF=1.940), 59(10), 1183-1187, (2005). |
2004
1 |
M. Abdullah, F. Iskandar, S. Shibamoto, T. Ogi, K. Okuyama: Preparation of oxide particles with ordered macropores by colloidal templating and spray pyrolysis, Acta Materialia (IF=3.760), 52(17), 5151-5156, (2004). |
---|
Non-SCI Journal: 6 Papers (*Corresponding Author) |
---|
6 |
藤本敏行, 瀬戸章文, 荻 崇, 奥山喜久夫:非常態下における二次粒子生成・成長とその計測技術, エアロゾル研究 (Review Paper)(IF=0), 29(S1), S6-S17, (2014). (Ac2013/10/01,Pb2014/2), T. Fujimoto, T. Seto, T. Ogi, K. Okuyama: Development of an aerosol instrumentation and secondary particle formation and growth under low pressure and low temperature conditions, Earozoru Kenkyu(Review Paper)(IF=0), 29(S1), S6-S17, (2014). (Ac2013/10/01,Pb2014/2) |
---|---|
5 |
横田 勝, 玉置洸司郎, 齋藤範三, 佐分利敏雄, 荻 崇, 栃原美佐子, 小西康裕:金属イオン還元細菌"Shewanell algae"を用いた銅酸化物から金属銅への直接還元, 粉体および粉末冶金,60(7), 334-340 (2013).(Ac2013/05/23,Pbxx) |
4 |
荻 崇*,木崎原裕, I Made Joni, 岩木貫, 奥山喜久夫: 酸化チタンの表面改質による無色透明ナノ粒子分散液の作製, 粉体工学会誌 ,50(6), 421-428 (2013).(Ac2013/3/5,Pb2013/6) T. Ogi*, Y. Kisakibaru, I Made Joni, T. Iwaki, K. Okuyama:Synthesis of a colorless suspension using surface modified TiO2 nanoparticles, Journal of the Society of Powder Technology,50(6), 421-428 (2013).(Ac2013/3/5,Pb2013/6) |
3 |
東あるみ, 斎藤範三, 荻 崇, 小西康裕, "バイオ吸着によるインジウムの回収と使用済み液晶パネル資源化への応用", 金属学会誌, 75(11), 620-625,(2011) (Ac8/24,Pb11/1), H. Arumi, S. Norizoh, T. Ogi, K. Konishi: Recovery of Indium by biosorption and its application to recycling of waste liquid crystal display panel, Journal of the Japan Institute of Metals, 75, 11, 620-625 (2011).(Ac8/24,Pb11/1) |
2 |
荻 崇, 蒔田顕輔, 玉置洸司郎, 斎藤範三, 小西康裕: 還元細菌Shewanella oneidensisを用いたAu(III)イオンの還元・ナノ粒子化, 粉体工学会誌, 48(3), 160-166 (2011/3). T.Ogi, K.Makita, K.Tamaoki, N.Saitoh, Y.Konishi: Synthesis of gold nanoparticle by the metal ion-reducing bacterium shewanella oneidensis, J. Soc. Powder. Technol. Jpn., 48(3), 160-166 (2011). |
1 |
岩松正, 平川千佳, 中井祥二, 荻 崇, 奥山喜久夫: 静電噴霧法による無機・有機 コンポジット粒子の合成, 粉体工学会誌 (IP=0), 47(12), 820-825 (2010/12). T. Iwamatsu, T. Hirakawa, S. Nakai, T. Ogi, K. Okuyama: Preparation of inorganic/polymer composite particles by electrospray, J. Soc. Powder. Technol. Jpn., 47(12), 820-825, (2010). |
Proceeding: 8 (*Corresponding Author) |
---|
8 |
T. Ogi*: Aerosol Process for Materials Synthesis on the Use of Rare Metal, Proc. of 21th Nisshin Engineering Particle Technology International Seminar, Japan, pp.25-32, (2012). |
---|---|
7 |
K. Okuyama, T. Ogi, A. B. D. Nandiyanto, R. Balgis: Aerosol Material Processing for Energy and Environmental Application, Proc. of the first China-Japan Aerosol Symposium, pp5-8, (2012). |
6 |
A.B.D. Nandiyanto, A. Suhendi, Y. Kisakibaru, T. Ogi*, K. Okuyama: Generation of Highly Ordered Porous Antimony-Doped Tin Oxide Film by a Simple Coating Method with Colloidal Template, World Academy of Science, Engineering and Technology, 6, 1146-1149, (2012). |
5 |
Y. Kisakibaru, A.B.D. Nandiyanto, R. Balgis, T. Ogi*, K. Okuyama: Preparation of Porous Carbon Particles using a Spray-Drying Method with Colloidal Template, World Academy of Science, Engineering and Technology, 6, 378-381, (2012). |
4 |
T. Ogi, R. Honda, K. Tamaoki, N. Saitoh, Y. Konishi: Biopreparation of Highly Dispersed Pd Nanoparticles on Bacterial Cell and Their Catalytic Activity for Polymer Electrolyte Fuel Cell, Proc. of 2010 MRS Spring meeting, MRS, vol.1272, pp.201-207, (2010). |
3 |
Y. Konishi, N. Saitoh, T. Ogi: A New Biohydrometallurgical Method for Processing of Deep-Sea Mineral Resources, Proc. of the 28th International Conference on Ocean, Offshore and Arctic Engineering (2009). |
2 |
Y. Konishi, S. Shimanaka, N. Saitoh, T. Ogi, T. Nomur: Microbial Preparation and Catalytic Activity of Palladium Nanoparticles on the Metal-Reducing Bacterium Shewanella oneidensis, Proc. of third International Conference on Processing Materials for Properties, 787-790 (2008). |
1 |
T. Ogi, T. Tachimi, N. Saitoh, T. Nomura, Y. Konishi: Microbial Synthesis of Gold Nanotriangles Using the Metal-Reducing Bacterium Shewanella algae, Proc. of third International Conference on Processing Materials for Properties, 783-786 (2008). |
Reviews: 34 |
---|
34 |
小西康裕, 横田勝,栃原美佐子, 荻 崇: 金属イオン還元細菌を用いる貴金属・レアメタル等の分離と回収ならびに 金属ナノ粒子触媒の創製, 粉体および粉末冶金, 64(5), 222-229 (2017). |
---|---|
33 |
荻 崇: 微粒子のナノ構造制御と機能性材料への応用(Design of Nanostructured Particle and their Application to Functional Materials), スマートプロセス学会誌, 5(6), 342-349, (2016). (2016/11/20予定) |
32 |
荻 崇, 奥山喜久夫: 静電紡糸法における100 nm以下のストレートナノファイバーの 合成とフィルタ性能評価, クリーンテクノロジー, 26, 7-12, (2016) (2016/1/10) |
31 |
荻 崇, 奥山喜久夫: ナノ粒子材料による光触媒の高効率化, 空気清浄, 53, 22-31, (2015) (2015/9/30). |
30 |
荻 崇, 奥山喜久夫: 固相法によるレアアースフリー蛍光体材料の開発, ケミカルエンジニヤリング, 60(6), 423-432. (2015). (2015/6/1) |
29 |
荻 崇, 奥山喜久夫:プラズマ中での微粒子の挙動と除去の可視化, 空気清浄,52(6), 427-433, (2015) (2015/3/31) |
28 |
荻 崇, 奥山喜久夫: 軟X線照射を用いた低温・減圧下でのイオン誘発核生成の評価, 空気清浄, 52(6), 434-439, (2015) (2015/3/31) |
27 |
荻 崇 [特集]エアロゾルプロセスを用いた微粒子材料の合成と環境エネルギー材料への応用,エアロゾル研究, 29(2), 76, (2014) (2014/7/8) |
26 |
荻 崇, 坂本裕馬, 奥山喜久夫: 微生物を用いた金属イオン含有液の液体清浄, 空気清浄,51(2), 11-17, (2013) (2013/7/20) |
25 |
荻 崇, 小野瞳, 中井祥二, 奥山喜久夫, 大谷吉生, 包理, 新沼仁: 静電紡糸法によるナノファイバーの形態制御と エアフィルタへの応用 , 空気清浄, 51(2), 4-10, (2013) (2013/7/20) |
24 |
荻 崇、奥山 喜久夫:超音波噴霧法によるナノ粒子および 微粒子材料の合成と評価, 超音波TECHNO, 25(1), 2013年2月号,1-5 (2013) (2013/2/1) 日本工業出版 |
23 |
荻 崇, 奥山 喜久夫:ナノメートル粒径域における凝集粒子および非球形粒子の計測, クリーンテクノロジー, 22(12),1-7 (2012/12) 日本工業出版 |
22 |
荻 崇, 奥山 喜久夫:アプリケーションにマッチしたナノ粒子材料の構造化と制御, 粉体技術 4(11), 1075-1085, (2012/11) 日本粉体工業技術協会 |
21 |
荻 崇, 中井祥二, 柿谷篤樹, 奥山喜久夫, 包理, 新沼仁: 静電紡糸法による多層ナノ繊維層エアフィルタの製造と性能評価 -ナノファイバーを用いたエアフィルタの高性能化-, クリーンテクノロジー, 22(1), 28-32, (2012). |
20 |
奥山喜久夫, 荻 崇、アセプバユダニナンディヤント、李信榮: ナノ粒子のかたち・空孔構造の制御とその応用, 粉砕, 55, 3-11 (2011). |
19 |
荻 崇: バイオプロセスによる金属ナノ粒子材料の創製と応用, 粉体工学会誌 解説フロンティア研究シリーズ, 48(10), 716-723, (2011). |
18 |
荻 崇, 奥山喜久夫: ナノパーティクルの挙動 -ナノ粒子は材料としてどのように役立っているのか, クリーンテクノロジー, 21(6), 54-61 (2011). |
17 |
荻 崇, 奥山喜久夫: ナノパーティクルの挙動 -液中ナノ粒子の挙動は気中の場合とどのように異なるのか, クリーンテクノロジー, 21(5), 33-39 (2011). |
16 |
李 信榮, 荻 崇, 奥山喜久夫: ナノ粒子の合成と機能化技術の最新動向, 化学装置, 53(5), 33-40 (2011). |
15 |
荻 崇, 奥山喜久夫: ナノパーティクルの挙動 -ナノ粒子はどのようにして電気を帯びるのか, クリーンテクノロジー, 21(4), 49-55 (2011). |
14 |
荻 崇, 奥山喜久夫: 超音波を利用したナノ粒子合成と特性, エアロゾル研究, 26(1), 36-41 (2011/3/21). |
13 |
荻 崇, 奥山喜久夫: ナノパーティクルの挙動 -ナノ粒子の凝集・焼結・分散・再飛散, クリーンテクノロジー, 21(3), 67-73 (2011). |
12 |
荻 崇, 奥山喜久夫: ナノパーティクルの挙動 -流体中でナノ粒子はどのように運動して付着するか, クリーンテクノロジー, 21(2), 48-53 (2011). |
11 |
荻 崇, 奥山喜久夫: ナノパーティクルの挙動 ナノ粒子の発生を評価して制御しよう, クリーンテクノロジー, 21(1), 61-66 (2011). |
10 |
小西康裕, 荻 崇,斉藤範: 金属イオン還元細菌を活用する貴金属ナノ粒子の室温合成とその応用, 粉体および粉末冶金, 57(7), 508-513 (2010). |
9 |
荻 崇: 微生物が創るナノ材料, 生物工学会誌, 88(11), 612 (2010). |
8 |
荻 崇,小西康裕: 微生物を用いたインジウムの回収, ケミカルエンジニヤリング, 55(5), 40-45 (2010). |
7 |
小西康裕,荻 崇: 希薄溶液からの貴金属のバイオ還元・回収, ケミカルエンジニヤリング, 53[7], 29-35 (2008). |
6 |
荻 崇, 改發豊,奥山喜久夫: ナノ粒子の合成と機能性材料への応用展開, 未来材料, 8(6), 4-9 (2008). |
5 |
荻 崇, 羽倉暢宏,奥山喜久夫: 機能性ナノ粒子の合成と応用, ナノ学会報, 6(2), 67-73 (2008). |
4 |
荻 崇, 矢吹彰広, 奥山喜久夫: ナノ粒子の合成・機能化とナノテクノロジーへの展開, 触媒, 49, 220-225 (2007). |
3 |
荻 崇, Wang Wei Ning, 奥山喜久夫: ナノ粒子の機能と合成技術, 成形加工, 18, 612-619 (2006). |
2 |
奥山喜久夫, 荻 崇, Ferry Iskandar: ナノ粒子の合成と機能化技術, 「化学装置」現場技術者に役立つ粉体技術の基礎と応用, 9月号別冊, 10-15 (2005). |
1 |
奥山喜久夫, 荻 崇, 本間良宏, 松井功: ナノ粒子の合成と機能化技術, 電子材料, 44, 18-24 (2005). |
Book: 16 |
---|
16 |
荻 崇:中空微粒子の合成と応用(監修 藤正督), (分担執筆), 77-85, 噴霧法および液相法によるテンプレート粒子を用いた 中空微粒子の合成,(シーエムシー出版, 2016年11月24日発刊). |
---|---|
15 |
荻 崇、奥山喜久夫:吸着・分離材料の 設計、性能評価と新しい応用(監修 金原粲), (分担執筆), 49-58, 第2章 無機吸着材、分離膜の細孔設計、孔径・配列の制御, 1節 (ナノ)微粒子の空孔構造制御, (技術情報協会, 2015年10月/30日発刊). |
14 |
荻 崇、奥山喜久夫:バイオベース資源確保戦略―都市鉱山・海底鉱山に眠る貴金属・レアメタル等の分離・回収技術(監修 小西康裕)(分担執筆), 58-65, 第T編 微生物利用, 第7章 大腸菌によるタングステンのバイオソープション, (シーエムシー出版, 2015年7月10日発刊). |
13 |
荻 崇、奥山喜久夫:粉体・ナノ粒子の創製と製造・処理技術−基礎物性からプロセス設計の実務 トラブル処理まで (Process Design and Trouble Shooting in Powder & Nanoparticle Processing) (分担執筆),7-13, 第1章粉体・ナノ粒子の機能性とその利用, 第2節ナノ粒子の機能性と工学的応用, (テクノシステム出版, 発刊:2014年11月13日). |
12 |
荻 崇、奥山喜久夫:粉体・ナノ粒子の創製と製造・処理技術−基礎物性からプロセス設計の実務 トラブル処理まで (Process Design and Trouble Shooting in Powder & Nanoparticle Processing) (分担執筆),95-101,第3章粉体層・粒子群の特性, 第4節ナノ粒子の分散・集合状態の制御と利用, (テクノシステム出版, 発刊:2014年11月13日). |
11 |
荻 崇、奥山喜久夫:粉体・ナノ粒子の創製と製造・処理技術−基礎物性からプロセス設計の実務 トラブル処理まで (Process Design and Trouble Shooting in Powder & Nanoparticle Processing) (分担執筆),207-217,第4章粉体の創製と加工, 第10節用途に応じたナノ粒子材料の構造化と制御, (テクノシステム出版, 発刊:2014年11月13日). |
10 |
Nandiyanto, A.B.D., T. Ogi, K. Okuyama: Polystyrene spheres for template in the production of nanostructured materials,pp241-268, Nova publisher, (invited book chapter). |
9 |
荻 崇、奥山喜久夫:ゾル−ゲル法の 最新応用と展望 (仮) (分担執筆),150-160,【総論編】第3章 形態制御 6 液相合成法によるナノ粒子, (シーエムシー出版, 2014/2/24発刊). |
8 |
荻 崇、奥山喜久夫:『攪拌・混合技術とトラブル対策 事例集』(分担執筆),49-59,第4章攪拌・混合による粒子の分散 5節均一分散,凝集・沈降対策ビーズミルプロセスによるナノ粒子分散液の作製 (技術情報協会, 2014/10/31発刊). |
7 |
荻 崇、アセプナンディヤント、奥山喜久夫: 粉・粒体の構造制御、表面処理とプロセス設計(分担執筆),52-65, 第8節 自己組織化によるナノポーラス微粒子の合成と応用, (技術情報協会, 2013/9/30発刊). |
6 |
荻 崇、 岩木貫、 奥山喜久夫: エレクトロニクス用途におけるコンポジット材料の混練・コンパウンド技術と分散・界面制御フィラー活用技術、配合条件、装置の選定・使い方、分析・評価技術(分担執筆), 751-759, 第1章 透明性コンポジット材料の混練・コンパウンド技術と条件設定, 第9節 ナノ粒子の分散・コーティングによるポリマーコンポジットの創製, (技術情報協会, 2013/4/30発刊). |
5 |
荻 崇、奥山喜久夫: “熱・光・水・汚れ・傷”による透明樹脂の劣化・変色対策とその評価(分担執筆),214-219, 第4章(泥・指紋などの)汚れ,曇り,加水分解などによる劣化対策とその評価について, 第5節ビーズミルを用いたナノ粒子分散液の作製と着色への対策,技術情報協会 (技術情報協会, 2012/3/30発刊). |
4 |
M.M.Munir, T. Ogi, K.Okuyama, Nanoparticle synthesis, dispersion, and functionalization for industrial application, pp608-612, Application 45, in Nanoparticle Technology Handbook (second edition), (Elsevier, 2012/4/27発刊) |
3 |
荻 崇、奥山喜久夫: 入門粉体材料設計(分担執筆)25-39, 第1章1.3 粒子に穴をあける, (日刊工業新聞社 2011/3/1発刊). |
2 |
小西康裕、荻 崇: 金属イオン還元細菌を利用した貴金属ナノ粒子の合成と応用, メタルバイオテクノロジーによる環境保全と資源回収-新元素戦略の新しいキーテクノロジー(分担執筆), 150-155, (シーエムシー出版 2009/3発刊). |
1 |
奥山喜久夫、Ferry Iskandar、荻 崇: 第1編基礎編 2.7金属粒子の合成と自己組織化, 自己組織化ハンドブック(監修国武豊喜、編集幹事下村政嗣・山口智彦)108-112,( NTS 2009/11/13発刊). |
Others: 11 |
---|
11 |
荻 崇*: IAC2014の報告 材料プロセスのセッションに参加して ,エアロゾル研究, in press |
---|---|
10 |
荻 崇*: 編集後記,エアロゾル研究, 29(2), (2014) (2014/7/8) |
9 |
荻 崇*: 奨励賞を受賞して,エアロゾル研究, 28(4), (2013) (2014/1/7) |
8 |
荻 崇*: グラナダEACの報告 Application of engineered nanoparticlesセッションに参加して, エアロゾル研究 |
7 |
荻 崇:生体適合性カーボンナノドット材料 生物由来の材料にのみ応答する発光インク ,化学(注目の論文), (2013/X) |
6 |
荻 崇:エアロゾルプロセスを用いたナノ構造体材料の作製, 空気清浄(エアロゾルビジュアル) 50(6), 48, (2013/1) 公益社団法人日本空気清浄協会 |
5 |
荻 崇,斎藤範三, 野村俊之, 小西康裕: ナノサイズ固体粒子の合成に微生物機能を!, 粉体技術, 2[2], 65 (2010). |
4 |
荻 崇,小西康裕: 微生物を機能性触媒材料へチェンジ!, 粉体技術, 2[2], 64 (2010). |
3 |
荻 崇*:2006年ミネソタで開催された 「7th International Aerosol Conference」に参加して , 粉体工学会誌 |
2 |
荻 崇*: 2005年ミネソタ大学の訪問および 「2nd International Symposium on Nanotechnology and Occupational Health」に参加して, エアロゾル研究 |
1 |
荻 崇*: 2004年ダヴォスでのECI国際会議 「Nanoparticles from the Vapor Phase Synthesis with Chemical and Biochemical Applications」 を体験して,粉体工学会誌 |
Patent |
---|
国内
10 |
(出願番号2012-248245):中空シリカ粒子の製造方法, (2012). |
---|---|
9 |
(出願番号2012-137147):蛍光体およびその製造方法, (2012). |
8 |
(出願番号2012-136569):正のゼータ電位を有するポリスチレン粒子の製造方法, (2012). |
7 |
(出願番号2011-144947):B-C-N-O蛍光体の製造方法, (2009). |
6 |
(出願番号2011-078422): B-C-N-O蛍光体の製造方法, (2011). |
5 |
(出願番号2011-069501):赤色蛍光体およびその製造方法, (2011). |
4 |
(出願番号2009-508966): M-C-N-O系蛍光体, (2009). |
3 |
(出願番号2009-268556):電極触媒およびこれを用いた燃料電池, (2009). |
2 |
(出願番号2009-284817):金属回収方法, (2009). |
1 |
(出願番号2009-148486):インジウムの回収方法, (2009). |
国外
4 |
(出願番号97107151): M-C-N-O系蛍光体, (2008). |
---|---|
3 |
(出願番号12/593307):M-C-N-O系蛍光体, (2009). |
2 |
(出願番号08721089.4): M-C-N-O系蛍光体, (2009). |
1 |
(出願番号10-2009-7021199): M-C-N-O系蛍光体, (2009). |
Media |
---|
2010/01/26 | 小西康裕, 荻 崇: 亜鉛・マンガン廃電池から 95% 回収: 日経産業新聞, テレビ東京ワールドビジネスサテライト, 日経産業新聞, (2010年1月26日). |
---|---|
2009/10/30 | 小西康裕, 荻 崇: 資源小国日本を変えるバイオ力, 日経産業新聞 , テレビ東京ワールドビジネスサテライト, (2009年10月30日). |
2009/07/08 | 小西康裕, 荻 崇, インジウムを微生物で回収, 日経産業新聞, (2009年7月8日). |
2009/xx/xx | 小西康裕, 野村俊之, 荻 崇: 大阪府立大学化学工学分野微粒子工学研究室, 化学工学, 73291 (2009). |